How to Reset Light on Pur Faucet Filter
The PUR Faucet Filter is a great way to enjoy filtered water in your kitchen. It’s also one of the most convenient and inexpensive ways to drink clean water without lugging around heavy bottles or buying expensive bottled water. In addition, the filter removes chlorine and other chemicals that can make drinking unpleasant and may be harmful over time too!
Once you install the PUR Faucet Filter, it will take care of all your filtration needs for up to three months before needing replacement, depending on usage. Today we’re going to talk about how to reset light on pur faucet filter.
Here Are the Step by Step Instructions for How to Reset Light on Pur Faucet Filter
Step One: Remove the Filter
The first step is to remove the filter from the faucet. Well, as with any filter-type product, you will need to give it a quick twist and turn to make this happen. This will only take a few seconds for you to complete as well – so don’t worry about it taking too long! But, again, this will be done by hand.
While turning and twisting the filter, it’s essential to be gentle – but firm at the same time. Doing so will ensure that you aren’t going to break either piece of equipment in your hands. But, of course, you don’t want to do this! So please take your time with the process – just like you would handling any piece of expensive machinery.
Step Two: Remove Filter Housing
Once the filter is removed from the faucet, it’s time to remove the housing portion! Well, needless to say, that this can be done by hand as well. You will need to twist and turn the housing until it comes loose out of the faucet. Don’t be intimidated by the fact that wires are attached to this entire process – it should still be elementary for you to take apart, just like any other product!
Step Three: Reset Button
The third step is pretty self-explanatory too. All you have to do is release the reset button out of the housing unit. It shouldn’t be too hard for you to accomplish at all. Keep in mind that this may leave a small residue behind on the reset button – if so, wipe it down with some water and soap. This will make sure that everything is cleaned up and back to new, like nothing ever happened!
Step Four: Put It Back Together
Last but not least, the last step that has to be taken is putting everything back together. This can be done by simply reversing all of the steps that you took earlier in your journey. Just remember that when you twist and turn things – just like you always do when handling machinery!
Also, please keep in mind that the reset button will have to be pressed to fit back into position. If you don’t do this, then none of the other steps will work for you at all!
Step Five: Turn On and Enjoy
And there you have it! Well, that’s all you will need to do to Turn on the Pur Faucet Filter. Remember that this filter automatically turns off after each use – but if you want to reset everything, carry out these five easy steps again! This should keep everything working properly for you and your family.
Why Is My Pur Water Filter Light Not Working?
The Pur faucet filter light will not turn on when the water filter begins to get low. This can be confusing for many customers, especially since the indicator light is specifically designed to notify users of the need to change filters.
The problem is that there are several reasons why this could happen, and each one requires a slightly different approach to fix the problem. The number one reason for this problem is that there has been a loss of power.
The indicator light on the Pur filtration system will only work when it is plugged into an electrical outlet, so if there has been a power outage or if something has happened to your electrical connection, then the light will not turn on. This is the easiest problem to fix, as all you have to do is plug in your Pur faucet filtration system and wait for it to detect that new filters are available.
Frequently Asked Question
Why Is My Pur Filter Blinking Red After Filter Change?
If your filter is blinking red after changing it, it is a warning sign that the filter needs to be replaced.
The issue may be due to the filter being too old or dirty. To prevent the filter from turning red and stop any damage caused by having an expired or dirty filter, replace it as soon as possible.
Why Is My Water Filter Still Red?
Well, the red water filter is usually due to the iron content in your water. Iron is a vital nutrient that helps transport oxygen throughout your body.
However, if you are suffering from anemia or iron deficiency, then it can be detrimental to your health and result in symptoms such as fatigue, weakness, dizziness, and shortness of breath. So if you have a red water filter and you aren’t feeling well after drinking this water for a few days, then consult with your doctor.
Why Is My Pur Filter Not Working?
The first thing you should do is make sure that the filter has been installed correctly.
To install a Pur filter, follow these steps:
- Click on “Settings” in the bottom right corner of your screen.
- Click on “Advanced Settings.”
- Find and click on “Setup” in the sidebar menu.
- Select “Add New Filter” from the top left menu and enter your email address for a confirmation email to be sent to you with instructions for setting up your new filter(s).
Where Is the Reset Button on the Pur Filter?
Pur water filters have a “reset” button on the back of the filter, but it’s not something you can use to reset your own filter. It only resets the counter on the bottom of the cartridge. If you’ve already had your filter replaced, or if you’re installing a new one, there’s no need to worry about this button.
Conclusion
The Pur faucet filter is a great way to get healthier water in your home. However, if you are having issues with the light not turning on or staying lit in your kitchen or bathroom, this can be an easy fix that doesn’t require any special tools. First, make sure that enough water pressure is coming out of the tap for it to flow through and activate the sensor.
If the problem persists after checking this simple step, then try cleaning off any dirt buildup around where it attaches to the spout by using baking soda paste mixing one tablespoon of baking soda into two tablespoons of warm water. The infomercial style of this article has shared information how to reset light on pur faucet filter.
