How to Add a Utility Sink in Laundry Room

Adding a utility sink in the laundry room is one of the best things you can do for your home. It will make doing dishes, cleaning floors, and other household tasks so much more manageable! With a utility sink, everything from washing your dog to mopping up an accidental spill on the kitchen floor becomes easier.

How to Add a Utility Sink in Laundry Room

You’ll be able to clean right away without having to run back and forth between sinks or stepping out of the house with dirty water sloshing around in your bucket. So, this article is for you. You will learn how to add a utility sink in laundry room with just one simple trick!

Step to Follow on How to Add a Utility Sink in Laundry Room

Step One: Select a Location

Choose where to place the utility sink. In many home projects, determining the location of features is an overlooked consideration. Yet, this will be one of the most important decisions in determining how your project will look when it’s complete.

Choosing Where to Place the Utility Sink

First, decide if you want to add a wall-mounted or pedestal utility sink. A wall-mounted sink is the safest choice for a novice because it’s fastened to studs and doesn’t require additional plumbing or installation. A floor-mounted sink or pedestal requires a preexisting drainpipe that feeds into a septic tank system, which may be difficult to find in your laundry room.

Step Two: Determine the Size

Utility sinks are typically small, often no larger than 18 inches wide. Measure the area where you want to install your sink and allow enough room on all sides of the fixture to access it easily. Remember that sink will be fastened to studs, which are typically 16 inches apart.

If you’re adding a pedestal sink, you will want to leave at least 12 inches on either side to give yourself enough room for your legs when using it. Adding towel racks, shelves, or cabinets around the sink will help make it more accessible and add a decorative touch to your finished project.

Step Three: Install the Faucet

After selecting a location for your utility sink, you’ll need to install the faucet. Ensure the faucet is compatible with your sink, which means it should be designed for use in a utility room. The pedestal will have its floor drain, but the wall-mounted sink will require a faucet.

If you’re adding a pedestal, your pipes should already be in place. However, you may need to add more if they don’t extend far enough from the wall or into any preexisting drains in the floor. A plumber can help estimate how much additional pipe needs to be installed.

Step Four: Add the Sink

Once all of your plumbing is in place, you can install the sink. The size and type you choose will determine how to prepare your surface for installation best. For example, a pedestal sink rests on the floor tiles, while a wall-mounted sink will fasten to the studs behind the sheetrock.

Depending on your plumbing configuration, you may need to drill holes for your faucet or drainpipe before installation. Usually, these are pre-drilled in sinks based on their size and type, but check to make sure. These steps should help you in learning how to add a utility sink in laundry room.

Installing the Sink

Step Five: Test Your Work

Once your sink is in place, you will need to make sure it’s fully functional. First, turn on the water and check for any leaks or drips from loose connections. It’s a good idea to leave the faucet running as you let the water sit overnight. This allows air bubbles to work their way out of your lines and prevents the possibility of a major leak when you turn on your faucet for the first time.

After letting it run overnight, you can test your sink by filling it with dish soap and turning on the water to fill the basin. If everything is connected correctly, this should happen without any issue. You can then plug up your drain and fill the sink with a couple of inches of water to make sure it drains properly.

Step Six: Be Safe

With your sink fully functional, you’re ready to use it for its intended purpose. However, a few safety precautions must be taken into consideration with all plumbing and electrical work around the home: Never start a project without disconnecting the power source to the room where you will be working.

If you don’t know how to shut off your home’s power, turn off the circuit breaker to the room and call a professional to complete your project. Always test your work with water before using it for its intended purpose. This will help identify any leaks or drips that might occur and ensure that you don’t flood your home while it’s in use.

You Can Check It Out to How Does a Portable Sink Work

Step Seven: Maintain Your Utility Sink

Nearly every household task can be accomplished in a utility room. Cleaning, washing laundry, doing dishes, and even bathing are all possible with the addition of a sink. However, it would help if you kept in mind that this is not your everyday kitchen sink.

It typically does not have the same finish or appearance as other sinks in your home. For this reason, it’s a good idea to use an unscented or colorless soap in your utility sink to prevent damage. In addition, this type of soap tends not to contain harsh chemicals that could discolor the surface, potentially leaving stains on fabrics you might wash there.

Cleaning Dishes

If you spot any small stains while cleaning dishes or clothing, you can use a cleaning product specific to the material in your sink to remove them. For example, for fiberglass or plastic sinks, wipe them down with a damp cloth and soap-free cleanser. This will help in how to add a utility sink in laundry room.

Step Eight: Replace Your Sink

If you decide that your sink needs to be replaced or if it’s worn out, you can take the old sink with you to the home improvement store. However, before taking anything apart, make sure you know where all of your pipes and faucets connect.

As an added safety measure, label each pipe before you unscrew it from its fitting. Use a permanent marker to label the pipes in a way that makes sense, such as sink drain or water supply. This will help ensure that everything goes back together with the way it came apart.

You can install a new sink by following these instructions in reverse order. It’s essential to ensure the faucet handles are turned off once your replacement is complete and to check for any leaks or drips before turning the water back on. If your new sink is significantly different in size from your old one, you may have to cut a larger hole in the back of the countertop.

Conclusion

The process of adding a utility sink to your laundry room can be straightforward. We’ve provided some helpful tips for those looking to do so, such as ensuring the new plumbing is up-to-code and not blocking any other water lines in the area.

These are just two examples of how you can make this project go smoothly, but there are many others that we haven’t covered here! If you have more questions about installing a new utility sink or want help with another aspect of remodeling your home, reach out anytime!

We’ll provide personalized service from start to finish on all projects, large and small. The conclusion paragraph is informative and provides information on how to add a utility sink in laundry room.

You can read it also – How to Remove a Stuck Bathroom Sink Drain Flange .

Smart Home Pick
Logo