How to Break a Round Lock

There are many ways to break into a home or business, but one of the most popular methods is violating lock. A round lock is typically made up of four pins aligned circularly around the keyhole. You can easily break into a locked door if you know how to manipulate these pins properly.

Round locks are most commonly used on doors, but they are also found on safes. When you insert the key into a round spiral, the pins fall into place, lining up the cylinder with the appropriate cuts for opening. The only way to open around the lock is to use the correct key.

If you don’t have the key, there are a few ways to get past the lock. One popular method is called lock bumping. This technique uses a unique bump key to create a vibration that moves the pins and opens the lock. In this blog post, we will go over how to break a round lock.

How to Break a Round Lock

Step to Follow on How to Break a Round Lock

Step One: Mark the Lock

The lock should be marked so that it is evident to the person you plan on picking the lock, but not to anyone else looking at it. The easiest way to mark the safety is to scratch one line at midnight and then another line halfway between that and six o’clock.

If these lines look like they interfere with the pins in the lock, you may want to draw a small line at midnight, where the key would have been inserted, and then another halfway point between that and six o’clock. It is essential that the scratch you draw on the lock is not too deep and leaves some of the chrome platings still on the lock.

Keep in mind that if your opponent is aware it’s around the lock, they can push the pins back down or jiggle the lock to stop you from being able to pick it. It is also possible that they may cover the lock with their hand to hide it from you. In these cases, it is best to try and get them to move so you can have a clear view of the lock.

Step Two: Insert the Pick

The pick should be inserted into the keyhole at a slight angle and then turned until it is in line with the lock’s center pin. The riding motion should be slightly in both directions to ensure that the maximum amount of pins is pushed up simultaneously.

It should be noted that different locks require different types of pressure and turning to work correctly. The only way to learn these things and increase your skill level at picking locks is by practicing, practicing, and more practice!

Different Locks Require Different Types

It is good to insert the pick at a slight angle and then turn it in line with the lock’s center pin. The riding motion should be slightly in both directions to ensure that the maximum number of pins are pushed up simultaneously.

Step Three: Push Up on the Pins

With the pick still in the lock and turned at the same angle, begin to push up on the pins with your left hand. Use your right hand to apply torque pressure to the wrench as you do this. If done correctly, this will cause the pins to move higher and into the shear line, the imaginary line that separates the plug from the cylinder.

Keep in mind that you should be pushing up on all of the pins simultaneously. If one or more of the pins is not being pushed, there is an uneven number of pins. If there is a variable number of pins, you can try rotating the pick a quarter turn and then go back to pushing up on all the pins at once.

It is important to note that as you are pushing up on the pins, you will also feel them moving. This sensation will let you know that the lock is opening and that you are doing everything correctly. This will help in how to break a round lock.

Step Four: Attempt to Remove the Lock

If the lock is still at the first pin and you feel resistance, it may be because your entry angle was too steep. If this happens to you, a torque wrench is a great way to adjust it. This is a small, L-shaped tool inserted into the keyhole next to the pick.

Great Way

Once all of the pins have been successfully pushed up into the shear line, you can attempt to remove the lock by turning it in a counterclockwise motion. If everything was done correctly, the safety would come right out, and you will be able to move on to the next one!

If, however, the lock doesn’t come out, likely, one or more of the pins has not been pushed up into the shear line. In this case, you will need to start from the beginning and adjust your technique accordingly. But, again, it is essential to remember that practice makes perfect!

Step Five: Maintain the Pins

If you take the lock apart frequently, it is essential to remember that all pins need to be pushed up equally. If any of the pins are allowed to drop back down into their original position, you will have to start your process over again.

This can waste valuable time and result in embarrassment if somebody catches you trying to pick a lock. Therefore, it is essential to have a lock-tensioning device to prevent this from happening. This tool looks like a small metal bar and is inserted into the keyhole after the pick has been removed.

As you turn the wrench, the bar will push up on all of the pins at the shear line. This is an excellent tool for when you have to take apart a lock often, but it can also be used when you’re learning how to pick locks. This information will help you learn how to break a round lock.

How Do You Break a Lock Quickly?

You can break around lock quickly by using the right tools and techniques. The most effective way to do this is to use bolt cutters. If you don’t have access to these, all that’s left for you to use are the methods below. Before we go into detail on these methods, please note that they’ll take longer than simply using bolt cutters, but they’ll do the trick.

Using Bolt Cutters

The first thing you should know is that there are two types of round locks; dimple locks and tubular locks – the only difference between them is how they’re constructed. A simple lock has a keyway containing lots of tiny dimples, while a tubular lock has a keyway made up of round tubes.

It’s also important to understand that two types of dimple locks; standard and warded. A traditional type has a slightly larger keyway than the average tubular lock, while the warded type has an extremely small keyway which is why it’s easy to tell them apart.

Conclusion

Without a crowbar or any other type of metal tool, you can break open a round lock with some simple items. Just use a screwdriver to remove the screws on the back of the door and then push outwards until it snaps off. You might want to wear gloves so that your hands don’t get dirty.

This is not an easy task, but if you have no tools, this may be one way to escape from being locked in somewhere without electricity. Please note that this method does not work for all lock types.

The moment you insert the pick, remember to do it at an angle of about 45 degrees or more. Make sure you are pushing it in quickly so that no pins are dropped in the meantime. The conclusion paragraph is informative and provides information on how to break a round lock.

Smart Home Pick
Logo