An ignition lock cylinder is a cylindrical object that sits next to your car’s steering wheel and contains a tiny keyhole. The purpose of this device is to prevent you from driving away without inserting the ignition key into the slot, which will then start up your engine.
This article discusses how to break an ignition lock cylinder it becomes stuck or if you lose your keys. First, try wiggling the lock with a screwdriver or any other metal tool until it loosens enough for you to pull out with ease.
If your key doesn’t work in the ignition, you can try using a blow dryer on a low heat setting. Direct the blow dryer towards the bottom of the lock and twist back and forth as quickly as possible.
Step by Step Guide on How to Break Ignition Lock Cylinder
Step One: Identify Your Car
The first step to breaking the ignition lock cylinder is finding out which type you have. To do this, try locking and unlocking your car with your keyless remote. If it works, you have a transponder-based system.
Transponders are tiny radio frequency transmitters placed inside your keys that communicate with the car. If it doesn’t work, you might have a non-transponder system. If the car is old enough and hasn’t been re-keyed by a previous owner, or if it’s a rental car, you probably have a non-transponder system.
Step Two: Get Your Drill Ready
Now that you know which system you have, it’s time to get your drill. First, make sure you have a drill bit that matches your transponder key’s blade. If it’s the wrong size, the lock won’t budge, and you’ll just be drilling into the blade.
Non-transponder keys may also have a flat blade or a different colored key head. If this is the case, make sure you get the appropriate drill bit for these blades.
Step Three: Drill In
Take your drill and place it on any of the grooves at the top of the lock cylinder. Drill into it until you feel resistance. Then, drill around the grooves, including the center pin, until they are no more. Take note that it takes more time to drill this type of lock, but you get the satisfaction of breaking into your car.
If you don’t have a drill, you can use a screwdriver to break an ignition lock cylinder. Just make sure you have an electric or manual screwdriver. A flathead screwdriver won’t work. Now that you know how to do it yourself, you can save some money.
Step Four: Get Your New Ignition Lock Cylinder
Once you’ve opened up the old ignition lock cylinder, please take note of how it looks. If you have a transponder system, the metal blade should pull out easily. Otherwise, your keys might be stuck inside, so get your magnet ready. Then, compare this to a new ignition lock cylinder and choose the appropriate one.
After doing so, insert your new ignition lock cylinder and push the metal blade inside. It should fit in securely without any problems or resistance. This might take a try or two but keep at it until it fits in. Once you’ve done this, take your screwdriver or drill and make four vertical grooves around the circumference of the center pin. This will keep it secure during use.
Step Five: Reassemble Everything
Insert the key into the ignition lock cylinder. Now that you’ve broken into your car, turning it on should be easy. If not, you didn’t put the key in all the way, or your blade is facing the wrong direction. Please take note of which side faces up and make sure it gets inserted correctly every time. In addition to doing this, check if anything is blocking it from turning.
Take everything apart again and look at how the ignition lock cylinder works. Make sure your key fits in there smoothly and easily. If it doesn’t, you might have a faulty ignition lock cylinder that needs to be replaced.
Step Six: Test Your Car
Once you’ve put everything back together again, test whether or not the new ignition lock cylinder works. Try locking and unlocking the car with your keyless remote. If the car responds, it means that you’ve done everything correctly.
If not, or if you have a flathead screwdriver instead of a drill, this is a sign that your ignition lock cylinder is faulty and needs to be replaced. In either case, it’s time to visit a professional. Otherwise, you can go ahead and use your new ignition lock cylinder to drive the car again.
Step Seven: Enjoy the Power
When you do get the new ignition lock cylinder to work, enjoy your newly acquired power. Don’t let anyone drive your car ever again and lock all of your friends out. Although you probably won’t go on road trips together anymore, this is a small price to pay for knowing how to break into your car.
In this article, you will read how to break ignition lock cylinder. Feel free to reprint the article verbatim but please do not forget to link back to our source. You can also find a link for this article below. Thank you! Now you know how to take apart your car and put it back together again.
Frequently Asked Questions
How Do You Drill Out a Ignition Cylinder?
The process of drilling out an ignition cylinder can be difficult and dangerous, so it is important to do it properly.
First, you need to turn off your car’s engine and make sure that the battery is disconnected from the car.
Then use a socket wrench with a ratchet head or cordless drill to remove the locknut on top of the cylinder head.
Next, loosen all remaining bolts using an impact driver before removing them one by one using a socket wrench with an extension bar.
How Do You Break a Steering Lock?
Breaking a steering lock is very easy; You Just Need to Use the Following Steps :
- Make sure that the vehicle has been turned off and all lights are off.
- Unlock the steering wheel by turning it to the left or right with your hands.
- With your hand on top of the lock, turn your body weight against it and try to move it in either direction until it breaks free from its housing.
How Do You Break an Ignition With a Screwdriver?
A screwdriver is used to break the ignition of a car by using a technique called “star screwing.” You will need to unscrew the screws from the steering wheel; then, you’ll use your fingers to pull back on the steering wheel.
Once it’s pulled back, you can reach into the keyhole and twist it with your fingers. Then use a screwdriver to turn it until you hear a click or feel some resistance. Once that happens, remove your hand and let go of the keyhole so that you can now start driving again.
Can an Ignition Lock Be Picked?
An ignition lock can be picked if it is a common type of lock. It has been possible to pick locks since the early 1800s.
However, there are many ways in which an ignition lock can be picked. The most popular method is by picking the tumblers in the cylinder using a tension wrench or a screwdriver-driven tool called a pick gun. Another way to do this is by using diamond tools that have been filed down to fit inside the keyway and turn when inserted into the cylinder.
Conclusion
The ignition lock cylinder is a crucial part of the car that has to be broken for it to start. It’s also an important safety feature, as it prevents anyone from driving off with your vehicle without permission.
If you’re trying to break ignition lock cylinders, there are several ways to do so, depending on what kind of tool or method you have available at the time. The key thing is to determine how much force you will need before making any attempt; if too little pressure is applied and damage occurs, you’ll still have an immobile car until repairs are made.
With these tips in mind, take care when breaking into someone else’s ride! The infomercial style of this article has shared information on how to break ignition lock cylinders.
Chet it out to learn about – How to Unlock Brinks Combination Lock
