How to Bypass Lid Lock on Kenmore Washer

In this blog post, you will learn how to bypass the lid lock on a Kenmore washer. This is a common problem with many of these types of washers and can be done very easily by following our easy step-by-step guide. We even include pictures! If your lid lock has been activated, you can’t run any cycles until it is deactivated, which makes for some frustrating experiences in the laundry room.

How to Bypass Lid Lock on Kenmore Washer

It takes time to read through each cycle and then wait for them all to finish before you get back in there and continue with your tasks. Luckily, we have the solution for you right here so that you don’t need to spend hours figuring out what went wrong or, even worse – calling a repairman. We have all the information you need to get your washer up and running in no time!

Materials You Needs

  • Phillips Head Screwdriver
  • Flat Head Screwdriver
  • Flashlight
  • Electrical Trial Switch (optional)
  • Replacement Lid Lock

Reason to Bypass Lid Lock on Kenmore Washer

  • Your washer is unresponsive to your touch
  • You can’t start any wash cycles
  • The lid lock light on the front of the machine is lit
  • It’s not turning on at all (power cord is plugged in)

If your Kenmore washer has a lid lock problem, you can fix it yourself by following these very easy steps. The entire process should only take around 5 minutes to complete, and we’ve included pictorial guides as well (just in case words aren’t enough).

Steps on How to Bypass Lid Lock on Kenmore Washer

Step 1:

Locating the Lid Lock on the Front of the Machine

Locate the lid lock on the front of the machine. There will be a small light flashing, and usually, there is text or symbols like an exclamation mark (!) flashing as well. This means that your washer has been locked and won’t do anything until you deactivate it.

Step 2:

Unplug the washer from its power source. This means that you will have to crawl around on the floor of your laundry room or wherever it is stored and locate the cord, which should be directly behind where the machine sits. When you’re finished, go plug it back in.

Unplugging the Washer From Its Power Source

Step 3:

Locate a thin object such as a paperclip or needle and straighten it out. If you’re having trouble finding one, the internet has plenty of alternatives such as keys and staples.

Step 4:

Slide the object into the lid lock at an angle (about 45 degrees) and push gently upwards while pushing to the left or right. You may need to do this several times before your washer unlocks. You will know that it has worked when the lid lock light turns off and your machine becomes responsive again.

Step 5:

If you have completed all these steps but are still having troubles, try plugging in the washer to another outlet or even a different room if possible. If there is no power to it at all, this means that the outlet you are using is faulty or broken and needs to be replaced.

Step 6:

When everything has been completed, go ahead and try washing a load of laundry! If this doesn’t work, there may be something else wrong, so check the user manual for more information on what could have gone wrong.

As mentioned, this is a very simple fix which most people can do even if they lack any technical knowledge. If you’re still having difficulties after following these steps, leave us a comment or send us an email. We are always happy to help! If you have any questions about this process, please leave them in the comment section below, and we will get back to you quickly.

You can check it to Open Kwikset Lock

FAQs on How to Bypass Lid Lock on Kenmore Washer

Q: What Is a Lid Lock ?

A Lid Lock  Stops the Washer From Being Used

A lid lock is a safety feature that stops the washer from being used until it has been disengaged. It’s not dangerous, but it can be very annoying when running a quick cycle.

Q: My Lid Lock Is Activated, and the Machine Still Won’t Run – Why ?

The lid lock can be caused by a variety of different things such as:

First, make sure that you are using the correct amount and type for your washer. If it is not working, try switching to another product without fabric softener or one with a different amount of softener. If it is still not working, you may have to replace some internal parts.

Q: Why Isn’t the Lid Lock Unlocking ?

If your washer hasn’t been locking properly, there are several reasons for this. A few examples are listed below, but if you are experiencing something else or none of these fit your situation, please leave a comment, and we will get back to you as soon as possible.

Your lid lock is broken and needs to be replaced. Check the user manual for instructions on how to do this, or contact someone who can help you with it. You have overfilled your machine, and it has prevented the lid from fully closing. Check the user manual or the sticker on top of your washer for how much laundry soap is required. The wrong type of laundry soap has been used, and it has blocked the lid lock. Be sure to use original Tide, All, Gain, Era – not another brand!

You Can Check It Out to: Bypass Lid Lock on Maytag Washer


If you have trouble opening your Kenmore washer lid, the most likely culprit is a broken hinge. We have an easy solution for this problem that will allow you to open your washing machine with ease! Most people don’t realize how common this issue is, and it can be fixed in just minutes with some household tools. The first thing you need to do is put on protective gloves so that when working inside the laundry room cabinet, there won’t be any risk of getting cut or scratched by sharp edges or nails sticking out from unfinished wood boards.

Once all safety measures are taken care of, locate the screws holding the hinges together on each side of the door frame. The screws should be located under the silver covers that are on top of the front door frame. Afterward, carefully pry off any wooden pieces or drawer fronts in order to access both hinges. Once you have done this, remove the damaged hinge and replace it with a new replacement part from your local hardware store. Thank you for reading our article. If you have any questions or concerns, please leave a comment below.

Check it out also – How to Bypass Control Board on Pellet Stove

Smart Home Pick