How to Change a Deadbolt Lock Without Screws

It is not uncommon for homeowners to forget how to change a deadbolt lock because it doesn’t need to be changed often. But, if you are looking for an easy way, then this article will show you just that.  This blog post will provide you with step-by-step instructions on how simple it can be without having any screws involved in the process. 

How to Change a Deadbolt Lock Without Screws

The tools needed include a screwdriver and silicone lubricant spray. It is recommended that before starting the project, one should turn off all power sources to avoid electrical shock from live wires or circuits running through the door frame area of your home.

Once everything has been shut off and disconnected from electricity, please remove your old lock cylinder and replace it with a new one. So, this article is for you. You will learn how to change a deadbolt lock without screws with just one simple trick!

Step to Follow on How to Change a Deadbolt Lock Without Screws

Step One: Determine

First, you have to determine whether or not your deadbolt lock needs replacing. You can do this by closing your door and locking the deadbolt with a key. Then, try turning the handle on the inside of the door. If it turns, there’s no reason for you to change anything about that mechanism.

Locking the Deadbolt With a Key

If the lock is the problem, you’ll need to remove the screws keeping the entire assembly in place. You’ll find these screws on either side of the keyhole. Once you’ve removed the screws, you can pull out the old deadbolt lock and install the new one.

It’s a good idea to practice opening and closing the door with the new deadbolt lock before you install it. That way, you’ll know that everything is working correctly before you put the screws back in and install the lock for good. Then, once you’re sure that things are functioning properly, slide the mechanism into place and tighten the screws.

Step Two: Remove Old

If your lock is still in working condition, but you want to change it anyway, then go ahead and remove the screws holding the deadbolt into place. Then, put them somewhere safe so that you can put them right back into their original spot when you’re finished.

Don’t disregard how tight these screws are when they’re in place. They’re put there for a reason, and if you’re not careful, you could end up stripping the screws or damaging the threads. Once the screws are out, you can pull out the old deadbolt lock and install the new one.

Again, it’s a good idea to practice opening and closing the door before installing it. That way, you’ll know that everything is working properly before you put the screws back in and install the lock for good. Then, once you’re sure that things are functioning properly, slide the mechanism into place and tighten the screws.

Install the Deadlock

Step Three: Mark Location

When you’re finished, your keyhole should be directly above the hole cut into the door. Please take note of this placement because you’ll need to know it to rekey or repin the lock later on. Also, it’s important to ensure that the deadbolt mechanism is installed at the same angle as before.

This ensures that the door latches properly when you lock it with a key and prevents your pins from becoming damaged. Then, with the correct placement in mind, slide the mechanism into place and tighten the screws before rekeying or repinning as needed.

Now you know how to change a deadbolt lock without screws. If you have any questions about the process, be sure to consult with a professional before attempting it yourself.

Step Four: Change the Deadbolt

If your deadbolt lock is no longer in working condition, then you’ll need to change it. The good news is that you don’t have to remove any screws to do so. Follow the steps outlined above, and you’ll be all set. It’s a good idea to practice opening and closing the door with the new deadbolt lock before you install it.

That way, you’ll know that everything is working properly before you put the screws back in and install the lock for good. Then, once you’re sure that things are functioning properly, slide the mechanism into place and tighten the screws.

It’s also a good idea to rekey or repin the lock so that it opens with the same key as your other locks. That way, you won’t have to worry about forgetting a key when you’re in a rush to get somewhere. If you don’t know how these processes work, then be sure to consult with a professional before attempting them yourself.

Step Five: Maintain Your Deadbolt

It would help if you did everything in your power to keep it in working condition. This means keeping the door clean and lubricated at all times. Dirt and rust can become lodged inside the lock if proper care isn’t taken, which can cause jams or malfunctions.

Keep the Door Clean

If you notice that your lock isn’t working properly, then be sure to clean it and lubricate it immediately. This will help to get things back up and running so that you can continue using your deadbolt with ease. And that’s all there is to it! Changing a deadbolt lock without screws is a simple process that anyone can do with a little education and preparation.

If you have any questions about the process, be sure to consult with a professional before attempting it yourself. Otherwise, you may end up causing more damage than you started with. However, changing a deadbolt lock without screws is a simple process that anyone can do with a little education and preparation. This will help in how to change a deadbolt lock without screws.

Step Six: Rekey the Lock

If the lock is old and worn out, you may need to replace it. The good news is that this process involves removing screws rather than changing the entire mechanism. Look for a place on your door where the gap isn’t as big, creating a crease.

Insert your skinny flathead screwdriver into the crevice and twist until the screws come loose. Take out the screws and set them aside before pulling the deadbolt out of the door. Now it’s time to install your new deadbolt lock. Before you do, be sure to take note of the location of the keyhole.

It should be directly above the hole cut into the door for the doorknob. If not, then move it to be in this position before you continue to install. Next, take your new deadbolt lockout of its packaging and slide it into place on the door.

You can check it to Lock a Door From the Outside Without a Key.

How Do You Take Apart a Deadbolt Lock?

First, you will need to remove the screws from the inside of the door using a screwdriver. Then, you will need to remove the faceplate of the lock. There may be retaining screws on the side that will also need to be released. Next, you can remove the bolt by unscrewing it from the housing.

Finally, you can install the new lock by following these same steps in reverse. Ensure that you properly align the bolt with the housing and that all of the screws are tight before using the lock. If you have any questions, please consult a professional locksmith.

Changing a deadbolt lock is a relatively simple task that can be done without any screws by using a few basic tools. The first step is to remove all of the screws from the inside of the door to take off the faceplate and expose the bolt assembly. Thanks for reading about how to change a deadbolt lock without screws.

How Do I Remove a Single Cylinder Deadbolt?

If you have a single-cylinder deadbolt, the process for removing it is pretty straightforward. First, you’ll need to remove the screws that hold the plate on the door and then remove the bolt itself. Once you have the bolt out, you can replace it with a new one.

Just make sure that you have a replacement bolt for your new lock. Generally, if a single-cylinder deadbolt doesn’t work, it has been installed backward. This can happen when the door is not closed all of the ways, and reopening the door reverses the installation.

Single-cylinder Deadbolt

In this case, you’re going to have to take the entire lock assembly off and reinstall it correctly. This is a much more complicated process than a standard deadbolt installation because it uses a punch system instead of attached screws. So, if you’re not comfortable doing this, it’s best to call a professional.

Conclusion

To change a deadbolt lock, start by removing the screws from the old one. Once removed, you can drag and replace your current door hardware with a new one that uses a different locking mechanism.

If you need to remove a single-cylinder deadbolt, you can easily do that yourself. Just be sure that the door is fully closed and that the lock is installed correctly before using it after you replace it. The conclusion paragraph is informative and provides information on how to change a deadbolt lock without  screws.

You may read it also – How to Pick a Craftsman Toolbox Lock.

Smart Home Pick
Logo