How to Change Light Bulb in Harbor Breeze Ceiling Fan

Changing a light bulb in Harbor Breeze ceiling fan is not as hard as you might think. However, it’s important to make sure the power is off before starting, and there are two different ways of getting up to the lamp-change position on your ladder.

How to Change Light Bulb in Harbor Breeze Ceiling Fan

One way involves standing on the bottom rung and using another person to hoist you up; another option is to use an extension pole with a hook at one end or some other device that will allow you to get high enough. The first step, whether from below or above, is removing any blades that may be in the way.

Once you’re up there safely, unscrew the old bulb and replace it with a new one before turning everything back on! So, this article is for you. You will learn how to change light bulb in harbor breeze ceiling fan with just one simple trick!  

Step to Follow on How to Change Light Bulb in Harbor Breeze Ceiling Fan

Step One: Turn the Power Off

Begin by turning the power off to your ceiling fan. This is a must! Ceiling fans are dangerous enough as it is, but if you leave them on with no electricity powering them, they will be even more hazardous.

If you have a switch that is dedicated to powering your fan, turn that switch off now. And if you don’t know where that switch is, turn off the master power at your circuit breaker box. Or unplug your fan from the wall outlet if you have a plug-in fan.

Begin by Turning The Power Off to Your Ceiling Fan

Step Two: Remove the Old Bulb

With the power to your ceiling fan now off, it’s time to remove the old bulb from its socket. To do this, you will need a ladder to reach your fan blades and a screwdriver for loosening and tightening screws and the like.

Grab your screwdriver, and carefully remove the small screws that secure your fan blades to the motor housing. It will be easiest to do this one at a time. You may want to use a piece of masking tape as a marker as you go, as it will help you keep track of which blade goes where.

Step Three: Remove the Old Bulb’s Holder

Once you have all of your fan blades removed, it will be necessary to remove that plastic light casing. You can do this by removing the screws that hold it in place. Use your screwdriver to do this; just like removing fan blades, use masking tape markers to keep things organized while working.

Once those screws are out, carefully remove the entire plastic light casing from the fan. This will expose the bulb. You should see several wires connected to it as well as a wire leading to a plug that runs up the center of your ceiling fan. This is because most fans come with a lighting kit included and have lights wired right into the fan motor housing.

You Can Check It Out to Hide a Camera in a Ceiling Fan

Step Four: Install the New Bulb

Once you have safely removed your old bulb from its socket, it’s time to install your new one. This will be a bit easier than taking the old one out since there’s not as much wiring involved. Just plug in your new bulb where the old one was and tighten it into place with either a screwdriver or a socket wrench.

Once Having Safely Removed The Old Bulb From Its Socket Its Time to Install The New One

You may be wondering how to install the new bulb in the right direction. The answer is simple: look at the old bulb. One side of it is slightly wider than the other, so you’ll want to install your new one exactly opposite that way. For example, if your old light were facing up when you removed it, your new bulb would go in facing down. If your old bulb was facing down, then your new one will face up.

Step Five: Secure the New Bulb’s Holder

Once your new bulb is secure in its socket, it’s time to replace the light housing. Take care when doing this because you don’t want to drop any of these small screws. Then, be sure that the wires are pushed securely into the housing and screw back into place. You may need to use a screwdriver or a socket wrench for this, depending on how you removed the old light casing.


I hope this article has helped you understand how to change a light bulb in your Harbor Breeze ceiling fan. If not, don’t worry! There are plenty of resources out there that can help with any issues or questions you may have.

You should always consult the manual for additional information on replacing bulbs and following all safety precautions before beginning installation. Happy installing! The infomercial style has shared details on how to change light bulb in harbor breeze ceiling fan.

You may also read this – Modern Fan: Top Reasons to Install it in Your Home

Smart Home Pick