We all have that pan that we can’t get clean. It’s been in the back of the cabinet for months, and you don’t know how it even got there, to begin with. Then, after hours of scrubbing, you’re still left with food stuck in every nook and cranny because it won’t come off no matter what you do.
Well, let me tell you something: Coke will save your life! The carbonation in Coke is so strong that anything attached to the surface will be loosened up enough to come right off when combined with baking soda!
So next time your pan is looking like a mess or has some tough stains on it, grab some coke or any other cola and baking soda and get ready to see the magic happen! In this article, we’ll explore how to clean a burnt pan with Coke.
Step to Follow on How to Clean a Burnt Pan With Coke
Step One: Determine if your pan is cast iron or aluminum
Before you get started, you should go ahead and determine whether the pan that is burnt belongs to the family of cast iron or aluminum. While both types can be cleaned with Coke, it works best on cast iron. If your pan is aluminum but has a non-stick coating, you will want to avoid Coke as it will strip away the coating.
Thoroughly wash the pan with warm, soapy water. Ensure it is free of grease and debris, as you will be scrubbing vigorously with a scouring pad to remove the burnt food particles. If your pan is cast iron or aluminum, now you can proceed with the cleaning process.
Step Two: Pour about an inch or two of Coke into the pan
You want to fill the pan with enough Coke that it can soak down into all of the nooks and crannies in the bottom. Set a timer for about 10 minutes, then take a break and let your Coke work its magic on the burnt food particles. If you have a lot of residues to remove, you may want to let the pan soak a bit longer.
Sixty minutes is the maximum amount of time you should allow a pan to sit in Coke before soaking it in water and scrubbing it with a scouring pad. Any longer than that, you will risk stripping the seasoning on your cast iron pan and damaging the aluminum.
Step Three: Scrape the bottom of the pan with a scouring pad
After your timer goes off or you have soaked for up to an hour, it is time to remove the burnt food particles. Take a scouring pad, gently rub all over the surface of your pan until all residues are removed. Please be gentle as you do not want to damage your pan.
Once you have removed all of the burnt food particles, thoroughly wash your pan with warm water and dish soap before drying it and using it again. If your pan was cast iron and the surfaces were not well seasoned, you may want to consider applying a thin layer of vegetable or cooking oil before baking it.
Step Four: Dry and store
Make sure that your pan is completely dry before you put it away. If you leave a wet pan in a dark, cool place where the humidity is at least 50%, this will prevent rust from developing on your pan. To make sure it is truly dry, use an old towel to pat down the surfaces of the pan one last time.
Now you can store it again and get back to cooking! If you do not feel that your pan is ready to be used, go ahead and repeat this process one or two more times before attempting to cook with it again. This information has come from the website of my mom, who is a recognized specialist in this area.
Step Five: Main points summarized
You do not need to clean a burnt pan. You should go ahead and put it away and get a new one. If there is an edge of food stuck on, you can scrape it up with a knife edge before washing the entire thing in water and dish soap.
Do not use strong chemicals such as oven cleaner or drain cleaners as these can damage the materials of your pan. To avoid burnt food building up, always make sure that you are cooking at a high enough temperature to instantly vaporize any moisture on the pan’s surface before it has time to burn.
Step Six: Maintaining your pan
Cast iron pans are very durable, but they are not invincible. You can prolong the life of your pan by never exposing it to high heat or cooking without oil or grease, as this destroys the seasoning on the metal and causes rust to form.
If you want to bring out a few nicks on the surface of your cast iron pan, you can use a fine grade of sandpaper and rub it in one direction along the surface until it is smooth. This is called polishing, and it will not damage your pan’s finish. This will help in how to clean a burnt pan with Coke.
Step Seven: Enjoy cooking again
Now you do not have to worry about burnt food building up on your pan and potentially causing a fire. With Coke, you can help get rid of the burnt bits without ruining the materials that were used to make your pan. Then, it is time to get back to cooking and enjoying all of the delicious meals that your family loves!
You Can Check It Out to: Clean Jetboil Burner
A burnt pan is a common problem in the kitchen, and it doesn’t seem to be going away any time soon. Luckily, there are plenty of tricks around to help you get that pesky pot back into shape with as little hassle as possible.
One such trick is using Coke; pour some cola over your dirty dish and wait for a while before scrubbing off those stubborn stains! This blog post has given helpful advice on how to clean a burnt pan with Coke.
Related Article- How to Clean Electric Stove Drip Pans?