How to Copy Apartment Garage Remote

If you have ever come home from a long day at work and cannot find your car keys, this blog post is for you. In the past, if someone lost their car key or remote to their apartment garage door opener, they would have to replace it. Today, there is a much easier way to get a copy of your apartment garage remote.

All you need is a blank key and a copy of your apartment garage remote. The first step is to take the blank key and cut it to the same shape as your lost key or remote. Once you have missed the key, you will then need to take the piece that is cut out and insert it into your apartment garage remote.

Remember that each garage door opener model may be different, so you might need to use a toothpick or other small object to make sure the key fits inside the remote. So, this article is for you. You will learn how to copy apartment garage remote with just one simple trick!

How to Copy Apartment Garage Remote

Step to Follow on How to Copy Apartment Garage Remote

Step One: Determine

First, you need to determine if the remote is a fixed code (a code that will always be the same for that unit or a rolling code variable. A fixed code is when you press and hold one of the buttons on the garage door opener and then push one button on your remote in quick succession.

If your remote works, it’s probably a fixed code. Rolling codes are coded so that when you press one button on your remote, it sends out multiple signals to the opener’s receiver over time. This makes it more difficult for someone to copy your remote, as they would need to know the exact timing of when the signal was sent to replicate it.

Suppose you’re unsure which type of code your remote uses; try pressing and holding one button and then pushing another. If the door opens, it’s a fixed code. If nothing happens, it’s probably a rolling code. If you have a variable code remote that uses an eight-digit security code, check the manual or on the opener itself for this code before proceeding, as it will need to be entered later on after copying the remote.

Step Two: Obtain a Remote

Next, you need to obtain a remote. If your old remote is broken or lost, it can be obtained from the following places: hardware stores. You will need at least one additional remote as you’ll not only have to copy your current opener but also program it into your car’s garage opener settings.

Need to Obtain a Remote

The store employee should show you the correct remote to purchase, and if not, the instructions below will help you figure this out on your own. If it’s a fixed code remote, you want to purchase a fixed code remote with the same or fewer buttons than your current opener.

If it’s a rolling code variable code opener, try looking for another variable code remote or a fixed code remote. If you have a car with a Homelink system, you will need to purchase a rolling code garage door opener compatible with this system.

Step Three: Open the Remote

Open the remote and discard its contents. You will want to open it carefully, as there may be a tiny spring-loaded piece of metal inside which has been programmed with your opener code. If the remote gets damaged in any way, you’ll need to obtain another one.

Also, if you have a rolling code variable code opener, take note of the button sequence. After copying the remote, this will need to be entered into your car’s garage opener settings, so it would be a good idea to write this down if you don’t know the sequence.

Open the Remote and Discard

If you have a fixed code remote, you’ll need to either remove the circuit board or pry it off if you can’t remove it easily. You will see a button battery under this, and you may be able to replace this battery with another one. If you have trouble getting your remote open, try looking online for instructions on how to do so, as different brands of remotes need to be opened in different ways.

Step Four: Copy the Remote

Once you’ve determined what type of remote you’ve got and opened it to obtain the code, it’s time to copy your remote. If your old remote is a fixed code type, press one button on your opener remote and quickly push the same button on the new remote. If you have one working remote already, do this with both remotes at once.

If both remotes open the door, you’re done. If your old remote is a rolling code type and you have a replacement variable code remote, make sure to program in the proper security code after copying it. Next, press and hold one button on your opener remote and quickly push another button until the door closes again.

Then, repeat this process with the new remote. If your old remote is a variable code type and you have a replacement fixed code or rolling code variable code opener, enter the proper security code into your car’s garage opener settings after copying it. This will help in how to copy apartment garage remote.

Step Five: Test the Remote

Now, it’s time to test the remote. If everything went as planned, your old remote should now be working with your new remote. Try opening and closing the garage door a few times to ensure it’s working correctly. If there are any problems, go back through the steps and try again.

Test the Remote

It’s also a good idea to keep an extra remote on hand in case of emergencies. That way, you’ll never be stuck without a way to open your garage door. When it comes time to copy your apartment garage remote, the process can seem daunting but is quite simple.

All you need is the existing remote, a new remote, and a little patience. If you’re having difficulty figuring out which remote to purchase, try following the store employee’s advice and choose a remote that is compatible with your car or garage opener.

Step Six: Maintain your Remote

Now that you’ve successfully copied your apartment garage remote, keeping both remotes in good condition is essential. Keep the remotes out of the sun and away from moisture, and avoid dropping them or leaving them in extreme temperatures.

If the buttons on your remote start to wear down, you can purchase replacement buttons online or at an electronics store. If the remote is damaged beyond repair, some companies can copy your remote for you. If maintaining your remotes seems like too much of a hassle, try leaving one in the car and attaching the other to your keys.

This way, you’ll always have access to at least one remote, no matter what happens to the other. In addition, copying your apartment garage remote is a simple process that can be done in just a few minutes. This information will help you learn how to copy apartment garage remotes.

Successfully Copied Garage Remote

Step Seven: Replace it When Needed

Once you’ve copied your apartment garage remote, it’s essential to keep an eye on the battery so that you know when it needs replacing. If the battery starts to die, either replace the battery or purchase a replacement remote. You may also want to try resetting your existing remote if it stops working after changing the battery.

To do this, open the remote and remove the battery. Then, wait a few seconds and put the battery back in. Finally, close the remote. If resetting your garage door opener doesn’t work, try opening it manually to determine if there’s an issue with the opener itself.

Conclusion

Apartment complexes are often equipped with a garage remote control to allow tenants access. Apartment owners can ask the property manager for the original copy of this keypad or they may be able to purchase one from an electronics store.

The most important thing is that you make sure it’s compatible with your model and programming before buying it. The conclusion paragraph is informative and provides information on how to copy apartment garage remotes.

Smart Home Pick
Logo