The most common types of fencing are chain links, barbed wire, and welded wire. Chain link is the least expensive option but can be difficult to cut or climb over. Barbed wire is more durable than chain link and cuts easily with a pair of heavy-duty shears.
Welded wire fence is also solid and durable, but it can be difficult to cut without making a big mess! The best way to successfully cut this type of fence is by using an electric welder that emits an arc between two metal rods that melts through the metal like butter.
This method will not only provide you with a cleanly cut edge, but it will also lessen the chance that your welding equipment might get damaged from cutting on hard steel! So, this article is for you. You will learn how to cut welded wire fences with just one simple trick!
Step to Follow on How to Cut Welded Wire Fence
Step One: Determine
First, you need to know for what purpose you will be cutting the fence. This is very important because it can determine which cutting tools that you will use. Furthermore, if there are any electrical wires in the way of your cut, then this could end with deadly results.
Another essential thing to consider is your safety when you are planning on cutting. This is important because you need to wear safety goggles or glasses when cutting any wire or similar object. Also, it would be helpful if you were wearing gloves while handling the wire.
If you are not wearing gloves, ensure that you wash your hands with soap and water before handling food or touching anything else. If the wire is exposed to your skin for too long of a period, then there is a chance it will leave rust on your hands.
Step Two: Tools Needed
If you are trying to make a small cut that does not require much force, all you need is wire snips. Wire snips can come in different sizes and shapes, depending on the amount of power it takes to cut through specific thicknesses of wire fencing.
However, if you have slightly thicker wire fencing, you will need to use a large set of wire snips. This is because it takes more force for them to cut through thicker objects than the smaller wire snips. If you are trying to cut thicker fencing, you will have to use a hack saw or a pair of bolt cutters.
You can also rent a large bolt cutter from your local hardware store. These tools usually last about a week, and they only cost a few dollars to rent. If the fence you are cutting is extremely thick, it will take a very long time to cut with a hack saw or large bolt cutters. Using these tools will make a lot of noise and could damage your ears, so it is recommended that you wear ear protection.
Step Three: Start Cutting
When cutting the fence, make sure that the fence is not touching any other objects or power lines. This can result in causing a huge electrical shock and possibly death. Also, do not cut too close to a high voltage source because this could also lead to death.
Make sure that you have a clear line of sight between where you are cutting and where your hands are. This is important because if you accidentally cut something connected to the fence, it will shock you. In addition, cutting through wires can result in death or serious injury, so make sure that if there are any nearby wires, stay away from them while cutting the fencing.
When holding the wire snips to cut the wire, have a firm grip on both handles. However, do not squeeze too hard, or else it will break and become useless. Also, make sure that you are holding your arms close to your body so if a shock does come through the wire, it has less of a chance of hitting other parts of your body.
You can check it to Make Electric Fence Hotter.
Step Four: Wire Removal
After making your cut, remove the wire fencing from the posts if it is not already removed. If the fence was in two separate pieces when cutting them, take each piece and put them to the side. This way, if another person has to cut, they can use these pieces as guides when they are making their cut.
Also, taking these pieces to the side will ensure that no other wires are attached to them. If the fence is still connected to the posts, use wire snips again to take it off. The easiest way to do this is by wrapping a piece of cloth around your hand, so you don’t get shocked.
Then, in between the cloth, you can hold one of the handles of your wire snips to remove them from the post. Once the fence is released, please place it in a pile next to where your cut was made. This will help in how to cut welded wire fences.
You can check it to Train Bougainvillea on a Fence.
Step Five: Cleaning
After removing the fence, go back to your cut and make sure that there are no pieces of wire left attached. If they are still connected to the posts, then use your wire snips again until none of it is connected to the post. Also, if some part of the fence was touching any other object or power line, remove it to prevent further danger.
When you are done, take the fence away from the work area and dispose of it properly. The last thing that needs to be taken care of is pieces of wire left on either side of your cut. If this is the case, pick them up quickly, so they don’t get a hold of anyone.
You can check it to Attach Fence to House .
Conclusion
Welded wire fence can be cut using a metal cutting blade attached to the end of an electric saw. The fences should not be more than 3 inches in diameter. You will need to use two people for this project because one person needs to hold the wire while the other cuts along with it with the blade.
Make sure that you wear protective gear before starting your project and use proper safety precautions during this process. The conclusion paragraph is informative and provides information on how to cut welded wire fences.
You can check it out also – How to Tighten Barb Wire Fence.
