The Sunbeam Electric Blanket is a popular choice for many people. However, there are times where the blanket may start to blink. This can be very frustrating and make it difficult to fall asleep at night. The blinking might be caused by the power cord being loose or not plugged in correctly. How to fix sunbeam electric blanket blinking with some simple steps that are outlined below!
Materials You Needs
- Blanket That Is Blinking
- Tape
- Scissors (Optional)
10 Ways On How to Fix Sunbeam Electric Blanket Blinking
1. Loose Power Cord
If the power cord is loose or not plugged in properly, then this will cause the Sunbeam Electric Blanket to blink. First, check and make sure that the power cord is plugged into a working socket. If it is, but the blanket keeps blinking, then try gently jiggling the power cord at the connection where the cord meets the blanket. If this doesn’t work, then try using a different socket or wall outlet to see if it continues blinking.
2. Blinking Timer Button
Another reason why the Sunbeam Electric Blanket might blink is because of the blinking timer button. If you press and hold down this button, then it will cause the blanket to blink continuously. To fix this, turn off the blanket and unplug it from the wall outlet for a few seconds before plugging it back in and turning it back on.
3. Faulty Power Port
If you have checked the power cord and socket to make sure that they are plugged in properly, then this might be a problem with the blanket’s power port. Unplug the blanket from the wall outlet for about 30 seconds before plugging it back in again. If this doesn’t work, the power port might be damaged and need to be replaced.
4. Damaged Fuse
If you have tried all of these steps and your Sunbeam Electric Blanket still blinks, then it could mean something wrong with the fuse at the bottom of the blanket. To replace the fuse, see if you can take apart the blanket from around the bottom. If you can, take the screws out and lift off the top layer of fabric. Carefully see if you can find a small metal strip known as a fuse at the very bottom of the electric blanket control unit. Take it out and replace it with another exactly identical one.
5. Damaged Power Cord Plug
If you have tried all of these steps and the Sunbeam Electric Blanket still blinks, then it might be a problem with the plug at the end of the power cord. First, try bending the prongs on this flat plug so that they are pointing upwards slightly. Next, if there is any corrosion, then carefully scrape it away. Finally, reinsert the plug back into the blanket control unit again and try turning it on.
6. Fuse Connection Problems
If you have tried all of these steps and your Sunbeam Electric Blanket still blinks, there might be problems connecting the power cord’s plug and the fuse. You can try reattaching the plug to the power cord so that it fits snugly and securely. If this doesn’t work, then you might need to replace the metal strip known as a fuse.
7. Lose Fuse Connection
If you have checked all of these steps and your Sunbeam Electric Blanket still blinks, there might be a problem with connecting the power cord’s plug and the fuse. You can try reattaching this flat plug to the power cord so that it fits snugly and securely. If this doesn’t work, then you might need to replace the metal strip known as a fuse.
8. Body Impressions
If there are no problems with the plug, power cord, or fuse and you have tried all of these steps to fix your Sunbeam Electric Blanket from blinking, then it might be a problem with body impressions on the blanket. Body impressions can happen when a person repeatedly uses the electric blanket over a period of time. This causes their weight to push into the fabric and cause a slight impression. To fix this, try alternating between different sides of the electric blanket every time you use it to distribute your weight evenly.
9. Lose Fuse Connection
If you have checked all of these steps and your Sunbeam Electric Blanket still blinks, there might be a problem with connecting the power cord’s plug and the fuse. You can try reattaching this flat plug to the power cord so that it fits snugly and securely. If this doesn’t work, you might need to replace the metal strip known as a fuse.
10. Blanket Too Warm
If you feel that the Sunbeam Electric Blanket is too warm, it’s likely because there are problems with the temperature controls. Try pushing down on each button until you find one that turns off the heating function completely. If this doesn’t work, then try removing all of the buttons from the control unit. Then, take off the top layer of fabric and look for a small square panel at the very bottom. You will need to lift this to find the temperature controls underneath.
You Can Check It Out to Reset Sunbeam Electric Blanket
Tips and Suggestions
This is a wiring problem with the blanket. The wire that comes from the foot of the bed controls how hot it gets, and when using the auto function, the controller will alternate between high and low heat to maintain your set temperature. This can be fixed by simply reversing these two wires (the brown one goes to the red side of the controller, and the red one goes to the brown side). That will solve the problem with it blinking. I hope this helps someone.
Frequently Asked Questions
Why Is My Sunbeam Electric Blanket Blinking?
There are many reasons why your Sunbeam electric blanket may be blinking. The most common reason is that the auto-off feature has been activated. The Other Possible Causes for the Blinking Lights Are :
- The device is not plugged in, or it is unplugged from the wall outlet.
- There is a short circuit in the wiring of the device.
- A safety fuse has blown out and needs to be replaced.
Is It Ok to Sleep With Electric Blanket on?
No, it’s not ok to sleep with an electric blanket on. If you want to use an electric blanket, make sure it doesn’t contact your skin or anything else that could cause harm.
Can Electric Blankets Catch Fire?
Yes, they can. Electric blankets are a fire hazard. If the electric blanket is too close to something that could ignite it, such as an open flame or a candle, then the blanket could catch fire and start a fire in your home.
If you notice smoke coming from your electric blanket, immediately unplug it and call for help from the fire department.
Are Electric Blankets Bad for Your Bones?
Electric blankets are not bad for your bones. They have a lot of benefits that can help you sleep better and stay warm during the winter months.
There Are Many Benefits of Electric Blankets Like :
- They help keep your body temperature at an optimal level while you sleep by warming up the blanket in minutes without using a lot of energy.
- They help regulate blood pressure and heart rate to prevent sudden drops in blood pressure when you fall asleep, leading to dizziness or fainting.
- They keep your body heat in throughout the night by trapping warmth around your bed, so it doesn’t escape through drafts.
- Electric blankets also have special features that help reduce noise pollution and other disturbances while sleeping which can increase the overall quality of sleep.
Conclusion
After reading this article, you should have a better idea of how to fix sunbeam electric blanket blinking properly. There are only three wires between the left and right control unit, so it is very easy to fix. I hope you found this guide useful, and if you did feel free to share the link with other people who may also be having this problem. I hope this article was helpful. Thank you for reading.
Check it out to learn- How to Get Static Out of a Fleece Blanket
