You might be surprised to find that plastic shower curtains are not made of the same material as the ones you see in stores. Most people assume that all shower curtains are the same, but this is not true. Instead, there are different kinds of shower curtain materials available for purchase.
Plastic is a prevalent option; however, it can cause some problems down the line if you do not know how to take care of it properly. For example, if your plastic shower curtain has begun to look wrinkled or damaged, this could be a sign you aren’t taking proper care of it.
Fortunately, there is an easy way to get rid of those wrinkles and keep your shower curtain looking like new. So, this article is for you. You will learn how to get wrinkles out of plastic shower curtains with just one simple trick!
Step to Follow on How to Get Wrinkles Out of Plastic Shower Curtain
Step One: Determine
First, whether you have a thick or thin shower curtain, you do this by placing your hand on the material and observing how much pressure it takes for your fingers to go through the fabric. If it is tough, you have a thick shower curtain. If it tears easily, you have a thin one.
If you have a thick shower curtain, press the wrinkles out with your iron. You can put it on low heat or use no heat at all if it is not too wrinkled. If you have trouble getting the wrinkles out, take off your sheets and lay your plastic shower curtain flat.
Please put them in the dryer briefly to get rid of some of the stiffness. Then, iron around them like you would a pillowcase or table cloth. Before working with your curtain, ensure it has been washed and dried if possible.
Step Two: Marking
Mark the edges of your curtain, making sure to note which corners need to line up with each other. This way, you can fold it evenly and avoid any mismatched edges.
Fold the curtain evenly along the marked edges. Be sure that all the folds line up straight and even, both vertically and horizontally. The curtain should fit snugly in a plastic dry-cleaning bag with no wrinkles. Use a marker or rotary pencil to make your marks visible and distinct.
You can use your iron steam button to remove wrinkles if your curtain is thick. First, you will need to separate the material into the folds that are already there. Press on them gently one at a time, ensuring that each section gets treated evenly so it dries flat.
Step Three: Remove Wrinkles by Stretching
If you choose not to iron the wrinkles out, take one corner of your curtain to a place where you can stretch it. The good thing about plastic curtains is that they are flexible enough to lay flat without any trouble. However, if that is not the case for you, try hanging the curtain over a doorway or outside on a clothesline to get it straight before you begin.
Work the wrinkles out by stretching the material, pushing one section in towards another. Use your hands and fingers. The wrinkles should start coming out while you work on them if only slight creases need to be flattened.
Keep at it until there are no more visible, large folds in the curtain. You should not leave it hanging to dry if you did not iron it because of the chance that some creases will come back. Instead, lay the curtain flat on a table or countertop and press on any remaining wrinkles using an iron.
Step Four: Ironing Shower Curtains
You can use the steam button on your iron if you have a thick shower curtain. Otherwise, please put it on low heat or no heat to not accidentally melt the plastic. You can fold the curtain in half and press out wrinkles by hand, starting at one of the edges towards the center.
This is an alternative if you have trouble with your iron or do not want to store it away after using it. Each section must be pressed down, so all parts are smooth and flat. If shaken out, the curtain should fall back to its original shape instead of sticking up at points or hanging crookedly.
If you have a thick plastic shower curtain that is difficult to press, use your iron steam button. These instructions will teach you how to get wrinkles out of plastic shower curtains.
You can check it to Make a Stage Curtain Open and Close.
Step Five: Maintaining the Curtain
Make sure that you hang your shower curtain in a place with adequate airflow. Plastic curtains can become moldy or mildew if they are not dried out thoroughly after each shower or left in humid areas of the house for extended periods.
The shower curtain keeps water from splashing out of the tub. If you want to keep it dry, hang it on a clothesline or over your shower rod when you’re not using it. Make sure there are no leaks in your bathroom that will keep it damp.
If you do not have a clothesline available, leave your curtain hanging to dry after each shower and wipe it down with a clean towel. Make sure that the curtain is completely dry before you fold it up and put it back into your shower or bathtub to store it.
You can check it to Wash Hair Without a Shower or Sink.
Conclusion
Now that you have the information, it is up to you to decide what’s best for your home. But if we had to give our opinion again, we would recommend trying one of these methods first and see how it goes or try them all! You may be pleasantly surprised by the outcome.
If not, at least now you know which option will work best for your needs and can move forward with confidence in deciding on how to get wrinkles out of the plastic shower curtain. This blog post has given helpful advice on how to get wrinkles out of plastic shower curtains.
Check it out also – How to Unlock a Shower Curtain Rod.
