How to Hang a Frameless Mirror With Command Strips

If you are looking for a quick and easy way to hang mirrors without the need for screws, nails, or any heavy-duty tools, then this guide is perfect for you. It will show you how to use Command Strips to hang your mirror. This is great if you rent an apartment or want something temporary until it’s time to move out. 

How to Hang a Frameless Mirror With Command Strips

The most important thing about using these strips is that they have double-sided tape on them to stick better than other types of adhesives like tacks or thumbtacks. You can also remove them later with no damage done at all! This blog post will show you how to hang a frameless mirror with command strips.

7 Steps to Follow on How to Hang a Frameless Mirror With Command Strips

Step One: Determine

The first thing you should do is measure the distance between two studs or solid objects in your wall. You can hang a mirror with command strips by using either one solid object on both sides or by using two objects on each side of the mirror.

These objects will support the entire weight of the mirror, so you must make sure that they hold at least a fair amount of weight. It would help if you also considered that it may not sit perfectly in the center of your wall when you hang a mirror with command strips.

Step Two: Prepare

Once you have successfully hung a mirror with command strips on your wall, the strip will eventually lose its holding power. When this happens, you can easily remove the strip from your wall without damaging it or the surface upon which it was applied. However, first, you must make sure that there is no weight still bearing down on it.

Mirror With Command Strips

Before applying a new strip to your wall, you should take the mirror down and clean the area where you will apply the new strip. You can do this with ordinary household cleaners or other products specifically designed for mirrors.

Step Three: Apply the Strip

It is important to make sure that you apply the strip correctly. First, you must line up the very top of the command strip with the top edge of your mirror and press it firmly into place. It is highly advised that you use either a level or a very steady hand to help you achieve this perfect placement.

Be careful to apply the strip with even pressure. You cannot let up on applying force for even a second, or else it may not stick correctly. Before hanging your mirror, make sure that the hooks are secure and hold onto the mirror tightly.

Step Four: Hang the Mirror

After you have successfully hung the mirror with command strips on your wall, it is advisable to use a level or some other measuring tool to make sure that it sits straight. You may even need to apply more strips if the mirror’s weight becomes too much for just one strip.

Succesfully Hung the Mirror Into the Wall

This is not always necessary, but it is best to use two or three different strips when you hang a mirror with command strips. This way, if one strip fails, the mirror will not come crashing down. Hanging a frameless mirror with command strips can be done at home and does not require the help of a professional.

Step Five: Removing the Strip

When you want to take down the mirror, all you must do is remove one of the hooks and then gently lift it away from its backing. You can then gently peel the strip away from your wall. Sometimes when you remove a strip with a lot of weight on it, another part of the strip may detach with it.

So if you notice that the strip does not come off easily by itself, you can use a corner or something sharp to pry it away from your wall. However, it is highly advisable to move slowly and be careful when removing these strips. Otherwise, they may accidentally tear-off part of your wall.

Step Six: Cleaning

After you apply and hang your mirror with command strips on your wall, you should be extremely careful when cleaning them off. When first removing these strips from their packaging, they are extremely sticky. If you handle them incorrectly, you could end up with a strip stuck to your fingers.

If this happens, all you need to do is place the offending strip back on its pack and use another one. It will not harm either piece of plastic if they stick together. You can then gently peel both strips away at once. When you want to clean off your mirror, it is best to wipe them down with a damp cloth. This will help in how to hang a frameless mirror with command strips.

Step Seven: Maintain the Strip

When you first hang a mirror with command strips on your wall, it is advisable to check them at least once every three months. This way, if the mirror’s weight becomes too much for just one strip, you can replace them before disaster strikes.

Maintain Your Mirror With Command Strips

You should also check the strips before applying new ones to your wall. If the hooks of your mirror are beginning to wear down, they may not hold as much weight. You should also check to make sure that the strip has appropriately stuck to your wall before you hang a new mirror on it.

Frequently Asked Question

Will Command Strips Stick to Mirrors?

Yes. Command strips are the ideal adhesive for sticking to mirrors because they are very strong and can adhere to any surface, unlike other types of adhesives that may not stick well to mirrors.

Can I Use Command Strips on a Bathroom Mirror?

Yes, you can use command strips on a bathroom mirror. This is because the material used for these strips is not conducive and does not produce any electricity when exposed to water.

Are Command Strips Strong?

Command strips are not strong. If you want to keep something up on the wall, you need a strong adhesive that can hold for long periods of time without falling off.

To find the best adhesive for this purpose, you should use a search engine like Google or Bing and do some research on what is available in your area.

Can I Use More Command Strips to Hold More Weight?

Yes, you can use more command strips to hold more weight. The number of command strips that can be used depends on the weight and size of the object being held. For example, a small toy could be held by one or two, while a large rug would require at least four.


It’s not that difficult to hang a frameless mirror with Command Strips. Follow these simple steps, and you’ll be good to go in no time! Hanging your frameless mirror is also an inexpensive project, so it doesn’t hurt your wallet while giving the illusion of more space.

With this information, we hope you’re able to find some inspiration for hanging your next framed art piece without having to hire outside help or spend money on new hardware like brackets and mounting screws. The infomercial style has shared information on how to hang a frameless mirror with command strips.

Check it out to learn- Diy Project – Create a Frosted Glass Yourself at Home

Smart Home Pick