Hanging cabinets on plaster walls can be a daunting task, but easy tips and tricks can make the process easier. One of the most important considerations is how deep your cabinets will hang from the wall. The deeper they hang from the wall, the more difficult it will be to install them properly.
It’s best to measure your depth carefully before deciding where you want your cabinet placement. However, if you’re going with a shallow cabinet installation, you can easily follow the steps below to prevent any problems in your installation. So, this article is for you. You will learn how to hang cabinets on plaster walls with just one simple trick!
Step to Follow on How to Hang Cabinets on Plaster Walls
Step One: Determine
First, you must determine if your cabinets are tall enough to require self-installation. Taller cabinets, especially those with upper doors and drawers, maybe better left to an experienced installer who can handle any potential problems during installation or damage to the cabinet.
Decide whether you want them installed on new walls or if you want to install cabinets on existing walls. If you install new cabinets or add cabinets to an already-installed kitchen, the wall studs don’t need to be placed where the cabinet will hang.
The closet flange can be attached directly to the drywall before it is installed, making installation easier than hanging cabinets on a finished wall. However, if the flange is part of a piece of pre-assembled kitchen cabinets, you may not be able to determine where it was manufactured and, therefore, where the studs are located.
Step Two: Mark
Once you have determined that your cabinets are tall enough to require self-installation and marked out where the cabinets will be installed, use a stud finder to locate the floor joists. This is necessary because most wall studs run from the concrete floor up through all floors in between for support.
The joists may not run directly under your cabinets, but these can be added later using additional wall studs if they are needed. The closet flange must be positioned parallel to the floor joists so the cabinets will hang evenly. Cabinets installation is made easier with a template, although this is not necessary for most standard cabinets.
Use the template to mark out where each cabinet will go on the wall. This makes it easy to locate the holes that will need to be drilled for mounting of the cabinets, or in the case of wall-hung or self-closing cabinets that do not require installation, you will know exactly where to measure to attach cabinet knobs and hinges.
Step Three: Drill
The next step in how to hang cabinets on plaster walls is locating the studs the plywood cutout around the marked-out template. This is the wall area where the cabinet will attach to the drywall, so finding studs in this area is important.
Suppose you are installing new cabinets on an existing installation. In that case, there may not be any studs exactly where the cabinet needs to go for support, but that’s no problem as long as there are studs close enough to secure the cabinets. Use a stud finder to locate any decorative molding or beams in the wall.
If they have been painted, you may need to scrape off some paint from these areas so you can access the wood underneath them. Then, use an electric drill and appropriate attachments, usually concrete screws, to attach the plywood cutout to the wall.
Step Four: Hang
Once the cabinet is attached to the wall, make sure it is level using a bubble level. Suppose the cutout does not align with any exterior walls or structural beams in the home. In that case, you may need to add additional support to stabilize the cabinet while allowing it to be easily removed for cleaning purposes.
Most self-installation kits include brackets that can be attached across the width of the cabinet, running from the floor to the ceiling, which will allow more weight to be added. If additional support is needed, studs can also be used for installation depending on what type of cabinets and how much weight needs to be supported.
Always use more than one fastener through the flange to ensure the cabinets are securely fastened. Once they are securely in place, you can now install doors, drawers, and hardware. How you hang a cabinet on a plaster wall is to install the flange before drywall so cabinets will bolt to studs, not just drywall.
You Can Also Check It Out Fix a Warped Antique Cabinet Door
Step Five: Supplement
If you are installing older cabinets or ones that have been purchased from an unfinished wood warehouse, there may not be studs directly where the closet flange will be installed. In this case, use a hammer and finishing nails to tack a strip of molding to the wall where you need to install the cabinet.
This strip of molding will be the area where the cabinet will mount and should use a wood that’s thin enough for your nail gun to penetrate through. After about three nails, be sure to check and see if it can hold all of the planned weight for installation.
When installing cabinets, always follow manufacturer specifications on hardware and proper installation methods to ensure that cabinets can withstand the amount of weight they intended. For example, adding molding strips is a common method used to install cabinets on plaster walls, but it may not always be done if drywall was installed before cabinets were hung up or due to time constraints.
You Can Check It Out to Get Hair Dye Out of Wood Cabinet
Conclusion
There are many ways to hang cabinets on plaster walls. You can use a level, plumb bob, and tape measure for the best results. The important thing is that you take your time hanging them to look straight and flush with the wall.
Another tip is to make sure you get hardware that will work well with both types of surfaces, plaster or drywall, before purchasing anything else. Finally, the conclusion paragraph is informative and provides information on how to hang cabinets on plaster walls.
You may also read: How to Cut Cabinets to Fit Stove
