There are many different ways to hang a curtain rod on an angled wall. In this article, we will explore which types of rods work best, how high the rod should be from the floor, and what kind of mounting hardware you’ll need. To make sure your curtains drape correctly, you must know where to place the rod from both sides of the window.
You want about two inches of space between each side for a total of four inches in between for your curtains to fall evenly on either side. When hanging a longer rod with multiple brackets, it is best to place the brackets equally spaced from each upper corner. In this article, we’ll explore how to hang curtain rod on angled walls.
Step to Follow on How to Hang Curtain Rod on Angled Wall
Step One: Determine
First, you will need to figure out the distance between your ceiling and where your curtain rod should be hung. For example, if you are riding a curtain rod on an angled wall, then the distance from the top of your window frame to how high or low you want to hang your rod can help you determine what size rod and finials decorative end pieces you need to complete your project.
Here is an example of how you would measure if you want to hang your curtain rod four inches below the top of your window frame. Take a measuring tape, measure the outside bottom edge of your window frame, mark it at four inches, and then draw a line to show where your curtain rod should be placed.
Then measure the distance between your ceiling and how high you want your curtain rod to go. For example, if the space is four inches, measure it on your wall, mark where you need to hang your rod, and draw a line that marks where the bracket should be placed to connect to your ceiling.
Step Two: Marking Bracket Details
Next, you will need to mark where the details of your curtain rod bracket should be placed. First, hold up your bracket and determine how high you want it to go on your wall. Determine this by measuring from the top of your window frame and marking where on the wall, then measure again from that spot down to four inches if that is what you need before marking your bracket placement.
After this, add another mark on the wall four inches below that if it is not already there and make a third mark two to three inches in from the side of your bracket. These will help when you connect your curtain rod brackets when hanging them on an angled wall.
If you have a drill, you can use the mark on the wall to help drill into it and then screw in your screws to hold your brackets to the wall. If not, then trace around each bracket with a pencil. These steps should help you in learning how to hang curtain rod on angled walls.
Step Three: Strategically Position Brackets
You need to strategically position your brackets so that they are level and extend out far enough from the wall so that your curtain rod will be at a good height for the window frame above it. Use a deck on top of each bracket to ensure both brackets measure the same distance from the ceiling.
Once you have that, then screw them into place on the wall. If you drilled into the wall with a drill, then make sure to use screws that are long enough to hold your brackets securely in place, but if not, trace around the bracket again and draw three brand new marks for where you will screw it back into place.
After this, put one screw into each of the three brackets to keep them held in place securely. For example, if you measured four inches from the top of your window frame, then you should not need more than that, but if not, or you are just unsure, then add another mark two to three inches in on the side of each bracket and make sure they are even from the top of your ceiling.
Step Four: Drill Together Brackets
Since you are not using an angled rod, you can drill together any of your curtain rod brackets on the same wall. This is optional if they do not need to be connected, but it makes changing them more accessible. Follow the instructions that come with your bracket and connect them by pressing down on the pieces that want to be touched until they are flush with one another.
Once you have them together, all you have to do is hang the rod onto your brackets and enjoy how much easier it was to install since you could screw into just one side of each bracket instead of drilling into both sides for each bracket.
Then, measure four inches down from the top of your window frame and mark it with a pencil, then draw a line that marks where you want to place your curtain rod on the wall. If there is not already a mark there, add one that will show where to hang your brackets, then screw them into the wall by tracing around each bracket with a pencil and then drawing three new marks where you will put the screws in.
Step Five: Placing Curtain Rods
Once your brackets are secure in the wall, your curtain rod should fit snugly over them. Now you can hang your curtain rods by hooking them onto each bracket and adjusting their height until they are even with one another. Then, all that is left to do is add some curtains and admire how your curtain rods are hanging on the wall.
If you need to place your curtain rods further in from the wall, you can measure down further from your window frame and mark another line four inches below that one. After this, put a mark on the wall two to three inches away from each bracket and make sure they are even.
With these marks created, you will find it easier to create the final steps by following the same instructions above, starting with the third bracket down instead of the first. Thanks for reading about how to hang curtain rod on angled walls.
Frequently Asked Questions
Can You Hang Curtains on an Angle?
It depends on the kind of curtain you’re hanging. If you’re hanging a straight curtain, there is no problem – just hang it at the desired angle. However, if you’re hanging a curved or curved-style curtain, you’ll need to adjust the angle accordingly. You can do this by measuring the desired angle and then marking the curtain with a pencil or pen before starting to hang it.
Can You Get a Curved Curtain Rod?
Yes, you can get a curved curtain rod. However, it will likely be more expensive than a straight curtain rod, and it may not be the best option for your needs. A curved curtain rod may be better suited for curtains that are very wide or long. It may also be easier to find a curved curtain rod that matches your window treatments.
Are Curved Curtain Rods Better?
There are many factors that you need to take into account, including your needs and budget. If you’re looking for style and want something unique, then curved curtain rods may be a good choice for you. However, if the price is more important than aesthetics, then straight rod curtains might be a better option.
Ultimately it’s important to test out different styles in your home so that you can find the right solution for your individual needs.
Do I Need a Longer Shower Curtain for a Curved Rod?
A longer shower curtain for a curved rod is not absolutely necessary, but it can make your life a lot easier. When you have to reach over the side of the tub to get your towel or washcloth, it becomes challenging and time-consuming. A long curtain also allows water to flow freely and prevents moisture from collecting on the sides of the tub.
If you don’t want to spend money on a longer curtain, there are other solutions that you can use. One option is to install brackets onto the wall opposite where your curvy rod hangs so that you can hang a standard-length shower curtain instead. Another solution is to simply buy an adjustable arm band that attaches directly in front of your mirror so that you can easily grab your towel or washcloth without having to stretch across the room.
Conclusion
Hanging a curtain rod on an angled wall can be tricky. But with this simple trick, you should have no trouble getting it right. First, you need to know what type of bracket or hanger your particular pole requires and the angle at which the brackets are supposed to hang about each other.
Then you will need to follow the steps above and hang your curtain rod onto the brackets and finally close it with another frame on the other end. After that, add some curtains and admire how easy it was to install a curtain rod on an angled wall.
It is important to note that if you do not wish to drill into your ceiling because of the cost, mess it could make, or you do not want to risk any damage, hanging curtain rods on an angled wall is not for you. This blog post has given helpful advice on how to hang curtain rod on angled walls.
You can also check it out: How to Hang Curtains Around a Window Air Conditioner
