How to Hide a Bathtub

In this day and age, there are many ways to hide the fact that you have a bathtub in your home. This is excellent news for those who want to avoid having a bulky, obtrusive tub in their bathroom but still want the luxury of taking a relaxing soak from time to time.

How to Hide a Bathtub

Many solutions range from simple curtains or towels placed around it when not used up to entire wall panels that pull out from one side when you wish to take a bath. So, this article is for you. You will learn how to hide a bathtub with just one simple trick!

Step to Follow on How to Hide a Bathtub

Step One: Determine

First, decide if a bathtub is truly essential. A bath or a shower can often replace the need for a tub but may not be as cleansing. Small children and those who are elderly or frail might want to stay in a tub for safety reasons. However, most people do best with showers or baths that include some raised seats.

Besides finding out if a bathtub is necessary, one should also determine the size of the space available to pick out an appropriate tub. For example, the U-shaped tub pictured below can perfectly fit the corner open, but its curved shape might not work elsewhere in the bathroom.

Small Children Want to Stay in Tub

If a bathtub is necessary, one should also determine whether to go with a cast iron or fiberglass tub. These materials will resist breaking and cracking under stress, but cast iron tends to be more expensive, while fiberglass may leak over time.

Step Two: Clean It Out

A bathtub can usually remain in place for quite some time after a home is purchased, so one should determine if the tub is usable before attempting to get rid of it. Remove everything from the tub, including any soap containers that might have been left behind or rings around the inside from hard water.

If possible, one should clean out the plumbing and remove all gunk from the drain. In most cases, the faucet and showerhead will need to be removed and cleaned as well. If this is not possible at present, it may be necessary to leave these in place for now and later make a trip back to clean them all out thoroughly.

Remove All Gunk From the Drain

If there are any leaks in the tub, they may be temporarily capped with a stopper or some other implement. After the tub is clean and determined that there are no leaks, one should add a couple of inches of water to drain out any old plumbing and then take everything off again.

Step Three: Disassemble

This step is also known as the fun step because it can be a bit of a puzzle to get everything apart properly. The first thing to tackle is all of the fixtures, handles, and other things that might need to be removed from the tub. When removing any old plumbing lines, make sure not to leave anything behind in the wall accidentally.

After this has been removed, a tub can be taken off its feet and moved towards a nearby bench or countertop, where it will likely need to be disassembled further. In most cases, the footrests of an acrylic tub have been glued into place and cannot be separated from the rest of it without damage.

Remove the showerhead or faucet from the wall and cut away any water supply lines. Before disconnecting a drainpipe, make sure there is no standing water inside it or in the bottom of the bathtub itself. This will help in how to hide a bathtub.

Step Four: Hiding It

The bathtub is now ready to be disassembled, cleaned out, and stored for a time before being reassembled inside the wall. To hide this storage process from view, one should first measure the length of the tub. This will determine how large of a piece must be cut out of the drywall to accommodate it.

An 8-foot bathtub will require a square 8-foot section of wall to be removed. Mark this outline and use the correct tool, a confident saw, to cut it out. If there is not an alternative drain nearby, one should make sure they leave at least 36 square inches of space around the opening for a future drainpipe to be installed.

The bathtub can now be pushed through the hole and cut down to size if necessary, but it may still be too tall for an excavated countertop space. If the tub is being pushed back in instead of being completely hidden in a wall or cabinet, one should not worry about this step just yet.

Step Five: Maintain It

One should properly secure the tub in an excavated space before putting on a countertop or covering it up with wall panels. If it is more convenient, one may want to reinstall and reconnect all of the faucet and showerhead lines while this step is being done, but it is also possible to do so later.

In most cases, one will need to create a support beam for the tub to sit securely on its own. This can be done with a length of wood secured in place with anchors; if the bar needs to be pushed back closer to the wall after this has been done, measure and cut it down before attempting to push anything back in place.

Create Support Beam for the Tub

Although it may not look like much, supporting the tub with a beam is an essential step to prevent future leaks. If one does not do this while there is still plenty of room to move around, it can be tough to get back into tight spaces once filled with cabinets or other furniture.

You Can Check It Out to Attach Quarter Round to Bathtub


The conclusion to the blog post is that there are many ways in which you can hide a bathtub. You need to be creative and open-minded when looking for solutions. There are no wrong answers, but it’s essential not to settle for an inadequate solution because of laziness or lack of time.

Make sure you consider your own needs when choosing how best to disguise your tub! The conclusion paragraph is informative and provides information on how to hide a bathtub.

Smart Home Pick