How to Install Curtain Track on Drop Ceiling

When it comes to hanging curtains on a drop ceiling, there are many options. One of the most popular is using curtain track which can be installed by drilling into the drywall and then screwing in hooks that grip onto the edges of the tiles as you slide them back into place.

How to Install Curtain Track on Drop Ceiling

The only downside to this option is if you don’t want people seeing up through your ceiling vents, which is why some choose to install the track directly into the tiles themselves. The only drawback when it comes to this option is that when you drill through tile.

As long as you’re not in a place where water will drip onto your drop ceiling tiles, then this method is a much more permanent and secure way to hang your curtains. So, this article is for you. You will learn how to install curtain track on drop ceiling with just one simple trick!

Step to Follow on How to Install Curtain Track on Drop Ceiling

Step One: Determine

First, decide whether or not you want a fully automated curtain track. If your answer is no, you need to do tape measure calculations and determine how much of the way will be exposed above the ceiling. This is because there won’t be an automation system over it until you put drywall up.

Measure Calculations and Determine

If your answer is yes, determine how much of the track will be exposed above the ceiling. This portion will be automated, so you need to do tape measure calculations for this part. Then, determine what wiring method you want to use for the automated components of the curtain track.

Step Two: Start to Install

After the first step, determine whether or not you are doing this to raise a door or window into the ceiling. This will dictate what tools you need and how high off of your floor you can install them. For example, if you are installing a curtain track for a storefront so that customers can see inside, then mount the curtain track as high as you can to maximize visibility.

If you are installing a curtain track for your living room, then mount it as low as you can. This will minimize the amount of exposed track above your ceiling and make your curtain track installation more aesthetically pleasing.

Step Three: Mount or Attach Curtain Track

Depending on the type of curtain track that you purchased, this step will be drastically different. If you purchased a fully automated system, then mount it according to manufacturers’ instructions. If your curtain track is not automated, attach it by putting two small screws into each corner where the tracks meet the ceiling.

If you have a drop ceiling, then attach the curtain track to the grid. If you do not have a drop ceiling, then attach it to studs. Then, create a paper template for the inside of your window or door. Transfer this template onto a piece of drywall, and cut it out.

Step Four: Attach the Curtain Track to the Drywall

This step must be done first on fully automated curtain tracks because you need to attach brackets first. Next, put two small screws into each corner on top of the bracket where the track meets your ceiling. This will hold it in place while you put drywall mud on it, then screw it into the wall.

Attach the Curtain Track

If you are not doing a fully automated track, put drywall mud on the ends that meet the ceiling and wall. Then, put two screws in each corner of where it meets your window or door opening. Once this is done, attach the track via brackets to both sides of your window or door.

Step Five: Cut the Drywall

Now that everything is installed, you need to cut out your window or door opening. Use either a jigsaw or drywall saw, depending on which works best for your situation and cuts better. Then, place the curtain track and brackets over it and screw them into the studs behind the drywall.

Then, attach the drywall to the track. Screw it into studs, then put drywall on top of that and keep screwing it in every couple of inches until you reach the ceiling. This will ensure that your curtain track is securely fastened to your home or building.

Step Six: Paint

After the drywall is up, paint. Then, put your curtain rod in place and determine where you need a valance piece to go. Mark it on the wall, then use a jigsaw or drywall saw to cut out a hole in the sheetrock to fit in once it fits incorrectly, screws through the drywall into the valance piece.

Then, once the drywall paint is dry, put your valance pieces into place. Screw them into studs or attach them to a cleat with small screws if that is what you have done. Now your curtain track installation for a window or door opening is complete! This will help in how to install curtain track on drop ceiling.

Step Seven: Maintain

After your curtain track installation is complete, you need to maintain it. Maintaining a curtain track does not take a lot of time and will keep you from having to replace parts or do a complete overhaul of the system. The simplest way to ensure that your curtain track is functioning properly is by checking the screws on brackets and valance pieces.

Maintain Your Curtain Track

If they start to become loose, put them back in place. If your curtain track begins to stick, you can purchase special lubricant for the tracks that will not damage the curtain or wall behind it. This will ensure that your curtains are smoothly working all of the time.

You can check it to Install Curtain Track on Drop Ceiling

Conclusion

To install a curtain track on a drop ceiling, we recommend that you measure and cut the rails to size to ensure they will fit. Next, attach them at the top with a screwdriver and then set them up against your wall or roof joists if possible.

When it comes time to hang curtains from this new track system, make sure you use grommets for each rod pocket, either metal or plastic, so there is no chance of tearing through the material when pulling open and closed. This blog post has given helpful advice on how to install curtain track on drop ceilings.

You may also check it out: How to Use Curtain Tie Backs Without Hooks

Smart Home Pick
Logo