If you want to join two curtain panels together without sewing, here are three easy ways that will have your window coverings looking great in no time. No matter what type of material your curtains are made from, these methods will work for them all.
Not everyone is a sewing expert, and many people don’t have time to do all of the hand stitching necessary to seam proper curtains. However, this doesn’t mean that you need to settle for mismatched or less-than-perfect window treatments.
You can quickly join together any number of curtain panels without ever taking out your sewing kit. In this article, we will show you three different ways that you can do just that. In addition, this blog post speaks about an issue that most people may not know about: how to join two curtain panels together without sewing.
6 Steps to Follow on How to Join Two Curtain Panels Together Without Sewing
Step One: Determine
The first step is to determine the proper length of your curtain panels. Each panel must be a multiple of two feet long because you want to cut a single set of fabric that can cover both panels side by side. So first, measure the width and height of each panel, then add half an inch for seam allowance on either end.
Then, divide this number in half and use it as your new number for the length of each panel. Next, please measure the length of your panels to verify that this measurement will cover both panels side by side and then write it down. This first length is the new width of each curtain panel.
If you have a set of panels that are longer than the other, measure each panel and add half an inch to both. Then add these measurements together and divide by two. This number will be the new length of each curtain panel after they are joined side-by-side.
Step Two: Locate
Next, locate where you want to join the panels together. Generally, you will find a prominent line of stitching running straight up and down along both sides of one panel. If this is not present, use a ruler to measure up to an inch above your desired location from the bottom hem.
Mark this spot on both curtain panels, so you know where to place them, and if the location is different on each panel, make a mark on both panels. This seam line should be two feet long and will need to match up when joining the panels together.
If your panels are different sizes, you can use this same seam to center them on one another. For example, if the more extended panel has a more prominent line of stitching, place the shorter panel beneath it and then cut off excess fabric from that end, so the seam line is even on both panels.
Step Three: Prepare
The next step is to prepare your panels for joining together. You will do this by stitching a straight line across the bottom hem of each curtain panel along the seam line you drew earlier. The thread should be about an inch above and below where you’ve drawn your seam line, and you will stitch back and forth several times over each spot to reinforce it.
Now, try pulling both of them apart. You should not be able to do so without ripping out the stitching or ripping through your fabric! The hemmed seam should be sturdy enough so you can pull the two panels apart, but it also needs to be thin enough that you can stitch through both layers.
If your fabric is very thick, use a smaller needle for this step. You can also overlap two pieces of thin fabric on top of each other if you need to join more than two layers or if your fabric is too thick to handle with one layer of stitches. This will help in how to join two curtain panels together without sewing.
Step Four: Pin
Next, pin the right side of your panels together and stretch them flat, so they lay as evenly as possible. Pin along the entire length of both panels’ seams on either side of where you will join them together. You can leave the excess fabric on either end so it doesn’t bunch up when you stitch, but make sure the pinned area is marked, so you know where to stitch.
If your panels are of different lengths, you will want to start each seam on the longer panel and attach them, so they align side-by-side. This will ensure the excess fabric is even on both sides, and it doesn’t look like one panel is longer than another.
Then, pin the other side of the panels together and repeat this process to join them. This will allow you to stretch both halves evenly, so they match up when they are sewn, and you won’t have any excess fabric bunched up on one side or another.
Step Five: Maintain Your Curtain Height
Your top hem should match up when you join the panels, but your bottom hem will not. You want to sew it back together, so you don’t lose any length, but if you stitch it too high up, there won’t be enough fabric to allow the curtain panels to hang evenly.
Measure down two inches from your marked seam line on both sides and draw new seam lines on each panel. This two-inch radius will allow the bottom of your panels to hang evenly when they are joined together. Make sure you pin this area before you sew it!
This is where the excess fabric will be, and if you forget to fold it up or pin it correctly, you could end up with it showing outside of your curtain. These steps should help you in learning how to join two curtain panels together without sewing.
Step Six: Clean the Seams
To ensure no loose threads show after the curtains are hung, you want to remove any excess thread from your seams. First, finish off each seam by back-stitching at both ends so they don’t unravel, and then carefully trim off any excess fabric on top of the stitching.
You can cut it close with a pair of sharp nail scissors, or use a seam ripper if you prefer. Once you’ve finished this step, try tugging on the seams again to ensure they will hold up in use. If there is even the slightest bit of giving in them, go back and repeat this step to reinforce the stitching.
If you want to re-hem your curtain panels, you could also do so now for an extra layer of reinforcement. Once you’re satisfied with how they look and feel, lay them flat and place a heavy object like books or furniture on top to press the seams flat and remove any loose part of the hem.
You can check it to Make a Single Curtain Rod Into a Double.
How Can I Hang Curtains Without Sewing?
There are a few ways that you can hang curtains in your home without sewing. One method is to use curtain clips or clamps in place of the hook-and-loop tape or ties, but this will only work if you have enough surface area on your window frame for the clips.
If you only want to join two pieces of fabric together, you can glue the hems of the curtains together. This will not provide a professional finish to your window dressing, but it is a quick and easy alternative that will hold indefinitely. Alternatively, you can use a commercial curtain joiner, a plastic device that holds the fabric together using suction.
Sewing the material together yourself will probably be your best bet if you still want a professional finish. This requires more time and effort than any other method, but it will give you high-quality results that are very difficult to replicate with the other methods. Thanks for reading about how to join two curtain panels together without sewing.
How Do I Add Extra Length to Curtains?
If you need to add extra length to your curtains, you can use drapery pins to join two curtain panels together at the heading. This is an excellent alternative to sewing, and you will be able to keep your curtains looking nice without any alterations or visible seams.
To learn how to join curtains using drapery pins, read the instructions provided. You can also watch a video demonstration if you prefer. Then, drape your curtain over the rod, making sure both panels are even at the head of the window.
If you need to, gently pull it out to hang evenly on either side of the panel heading. Next, prepare your drapery pins by bending the ends into small hooks. This will help them grab onto the fabric and keep your curtains from slipping back.
Sometimes you need to get on with life and not have the time or patience for sewing. This is when it’s good to know of a few ways of joining curtains together without sewing them. Whether you’re looking at temporary solutions while waiting for your new curtains, or if you want some quick fixes in an emergency, there are plenty of options available.
We’ll take a look at three different methods that don’t require any sewing whatsoever-Velcro curtain joiners, Velcro strips, and plastic clips. The conclusion paragraph is informative and provides information on how to join two curtain panels together without sewing.
You may read it also – How to Close Curtain Gaps.