How to Keep Bath Mat From Slipping

As a homeowner, you may have come across the issue of your bathmat slipping out from under you when exiting the shower or tub. This can be annoying and even dangerous if it’s done in the middle of shaving.

Luckily, there are some simple tricks to avoid this! For example, some people recommend using rubber grips outside of your tub/shower area to keep the mat in place, while others say that adding a rug runner on top of your existing mat will provide friction for it to stay put.

how to keep bath mat from slipping

If these methods don’t work for you, then try tucking towels around the edges where it meets with tile flooring. By following these tips, you’ll never have to worry about stepping on wet bathroom floors again! The blog post will walk you through how to keep bath mat from slipping, step by step. 

Steps on How to Keep Bath Mat From Slipping 

Step One: Get a Grip

After washing and drying your mat, take it by either end and give it a good shake. This will help to fluff the loops – those little nubs – and make them interlock more firmly. Then use your hands to rub each loop between thumb and forefinger to remove any lingering detergent or fabric softener that would cause smooth fibers to slip on the floor.

Step Two: Cut and Dry Your Mat

After each use, give the bath mat a brisk shake – with a little effort, it will “fluff” up. If you dry it with a towel after showering, you will have an even fluffier mat instead of spinning it in the dryer. Then, when dry, give each loop a good rub to remove any fabric softener and soap. This will leave the loops with “great gripping power,” according to Vivo’s website.

Step Three: Put Down Some Suction Cups

The last step for preventing your bath mat from slipping is putting down something that can grip. If you have a glass-top bathtub or some other type of really slippery surface, it may help to put down something with suction cups.

For Preventing Your Bath Mat From Slipping Is Putting Down Something That Can Grip.

This can be as simple as a washcloth or paw-shaped “paw wedge” for dogs, obviously. In addition, some gripper will give the mat’s nubs something to hold down on.

Step Four: Put It Away When Not in Use

If you have a big fluffy mat that doesn’t slip but is too bulky to store every day, take the top few inches off and use it as a smaller mat. Otherwise, when you have to step out of the shower or tub, keep your bath mat off to the side, so it doesn’t take up any extra space.

Step Five: Use in Conjunction With the Right Flooring

Allowing your mat to take over too much space in your bathroom can make it difficult when you want to open or close a cabinet door. If your cabinets are already installed, you may have to live with the crowded feeling. But if they are still in transit, take some measurements before they arrive and place your order accordingly.

In addition to the right cabinet size, you need a floor that will provide traction for your mat. Have a non-absorbent or slipper floor? Put something under the mat with some grip, such as rubber bathroom mats or a washcloth. Bath mats with suction cups work best on smooth surfaces.

How Do You Make an Anti Slip Mat?

One simple way to make an anti-slip mat is to take your bath(tub) mat, lay it on the floor face down, and trace around it using a pencil. Then cut out the shape you drew with fabric scissors. Next, place hot glue along all of the edges of the backside of your cutout piece that will attach to the floor.

With your bath mat laid face up, place glue along all of its edges that will attach to the back piece you cut out. Then, carefully line it up on top of your drawn shape and press down firmly over the glued areas. When thoroughly pressed together, use whatever method you prefer to keep your mat in place; some people recommend using binder clips, taping the edges down, etc.

Be sure to test for a slip by dragging your feet across the mat. If it moves or slips at all, adjusts as needed. When you’re satisfied that it won’t move around too much, wait for your glue to dry, and then enjoy! Here are some quick tips on how to keep bath mat from slipping.

How to Make an Anti Slip Mat With Tape

Purchase some strong, double-sided tape and cut it into small strips. Place the strips on the floor along the edges of your bath mat in a pattern that will keep your mat from slipping. You can use different colors of tape for decoration if you want.

Purchase Some Strong, Double-sided Tape and Place Tape Strips on the Floor Along the Edges of Your Bath Mat

When finished, place your mat on the strips and press down firmly. Be sure to test for a slip by dragging your feet across the mat. If it moves or slips at all, adjusts as needed. Wait for your glue to dry, and then enjoy!

How to Make an Anti Slip Bath Mat With Spray Adhesive

Make sure the floor is clean and dry. Place your mat face down on the floor. Shake a generous amount of spray adhesive onto the back of your mat, then spread it around using a roller paintbrush. Wait until the adhesive begins to get tacky before laying out your bath mat. Trim off any extra adhesive around the edge of your mat with a razor blade or craft knife. Let it dry, and then enjoy!


When you walk out of the shower, your body is wet and slippery. So the last thing anyone wants to do when they’re trying to avoid slipping on their bath mat in the middle of a bathroom floor soaked with water from the sink or tub drain is for it to slip away underfoot!

Here are some tips that can help keep your bath mat from sliding around too much without causing any damage caused by using something like duct tape. The answer can be found in this blog post!  Learn how to keep bath mat from slipping-to-follow tricks that will save you time, money, and frustration by preventing slips and falls.

You may also like- How to dehumidify a bathroom?

Smart Home Pick