A stage curtain is used to conceal and reveal the backstage area that actors use when not performing in the theater. Sometimes these curtains have been in place for decades or more. Unfortunately, with time, many of them become worn out and begin to look unsightly.
That’s why if you own a theater with an old-fashioned-looking stage curtain, you should consider replacing it with a new one. This guide will show you how to make your custom stage curtain open and close to being used as effectively as possible when introducing scenes in your play.
The first thing you will need to do is make a projection screen. Place two pieces of thick fabric on top of each other and attach them using either duct tape or rivets, depending on your preference. This article will teach you how to make a stage curtain open and close with a few simple methods.
Step to Follow on How to Make a Stage Curtain Open and Close
Step One: Determine
The first thing to do is determine what kind of curtain you are going to make. Several types of curtains are suitable for this project. Plain stage curtains can be purchased online or in theater stores. One common type of curtain used is the pocket opera curtain, which is large and folds up into a bag when not in use.
It would help if you also considered the ease of opening and closing it. A curtain made for a theater stage needs to open gracefully so that the audience will not see it. It must open slowly enough to cover up before an actor makes their entrance.
If you are making a curtain for a home or school play, you might want to use one, not theater-quality. This will be more affordable and easier to operate than most others and can often be modified to fit your needs. Another option is to make your curtain. Measure the space in which it will be used, and base its size on this measurement.
Step Two: Mark
If you are using a purchased curtain, carefully remove it from its bag or casing so that it can be measured. You will need to know the length of the top of the curtain and the width. Draw these measurements on paper so they can be transferred to your fabric later.
If you are making your curtain, fold the fabric in half with right sides together, and pin it. Measure the top of the curtain from bottom to top and draw a line on the fabric for this measurement. Then measure the side of your curtain and mark that length on another piece of paper.
Layout both lines on the fabric to line up and transfer them to your fabric by drawing through the pins. For the top of your curtain, mark out on each side exactly how much you need on each end to make it even when finished. This will help in how to make a stage curtain open and close.
Step Three: Cut
You will now cut out the fabric for this project. If you are using a purchased uniform curtain, you can either remove it from its casing or leave it in the casing and hang it up to work on. If you use a non-uniform curtain, lay it out flat with the right side still facing in.
Carefully take your shears, and cut your fabric according to the marks that you made earlier. Next, cut the top of the curtain by measuring in 3/4″ from each edge, and make a straight line along the inside of the fabric at this measurement. Then fold over 1/2″ on one side, and make another straight line for this measurement as well.
Once you have cut both of these lines, you will find that the fabric has formed a channel. Sew along the top and bottom channels to make them even stronger and prevent fraying. Next, cut off the excess fabric from each side by making two perpendicular folds according to your measurements.
Step Four: Attach
After you have cut your fabric, use the previous folds to your advantage. Fold the top of the curtain down so that it is flat with one side. Now bring each fold so that they are even with each other along this edge. Pin them together in place. Sew around all of these edges, being sure to sew along the top fold as well.
Now you will need to sew up the side of your curtain. Fold it in half with right sides together, and pin them together at each end. Continue folding down along one edge until they are even with each other once again, making sure that the right side of your fabric is inside of the channel.
Pin these edges together so that they will not move while you sew them. Next, sew along this channel to create a hem, and be sure to sew all of the ways around the track so the side is completely sealed off. After sewing this seam, turn your curtain right side out to expose the hem and channel.
Step Five: Hang
Hang your new curtain by attaching a hook to the top hem and a rod to the bottom edges. Make sure that it has enough room so that it will drape over the edge of your stage without being seen by anyone looking from backstage.
You have to attach curtain rings or curtain clips onto this curtain and then hang other items on those pieces. You can use clothespins, rings, or mini clamps. If you are hanging your curtain with rings, make sure that they hang evenly across the top of the curtain.
Measure in 1/4″ from each side and mark where two holes should be placed. Punch these holes using an awl or nail to avoid tearing the fabric too much. Make sure that you measure each side accurately because if the rings are not even, they will make your curtain appear crooked.
You can check it to Remove Rust From Shower Curtain Rod.
All in all, remember that curtains are one of the easiest ways to add new elegance and style to your home. With a bit of planning and creativity, you’ll be able to create your own custom window treatments for any room or occasion. You might even want to make a stage curtain open and close!
It can be easily adapted for other types of stories. For example, it might make a curtain the same as a novelette, which is not bad. The conclusion paragraph is informative and provides information on how to make a stage curtain open and close.
You may read it also – How to Make Shower Curtain Hooks Slide Easier.