Introduction
Bathtubs are slippery. This is a fact of life for anyone with a bathtub, and it’s the reason why everyone has to take extra care when they’re in one. But there are some simple things that you can do to make your tub less slippery.
These methods will also help you clean up any messes or spills that happen while you’re bathing! In this article, I will discuss how to make bathtub non slippery. So let us get started.
A Detailed Stepwsie Guide on How to Make Bathtub Non Slippery
Step 1:
Make sure to clean the bathtub thoroughly before starting your project. Use a bar of mild dish soap and warm water to remove any dirt, dust, or debris. Rinse the surface well to make sure all the suds are gone.
Step 2:
Dry the tub thoroughly before moving on to the next step. Use a soft towel to absorb any moisture left on the surface.
Step 3:
Apply a coat of car wax to the bathtub surface. Rub it in with a soft cloth until it is fully absorbed. Let it dry completely before moving on to the next step.
Step 4:
Apply a second coat of car wax if needed. Be sure to let it dry completely between coats.
Step 5:
Reapply car wax once a month to keep the bathtub from becoming too slippery from use.
Step 6:
Clean soap scum and hard water deposits with a commercial cleanser or white vinegar mixed with baking soda. Spray it onto the surface and let it sit for several minutes before wiping away residue with a soft cloth dampened with water.
Step 7:
Apply car wax every few months to maintain good traction when climbing out of the tub after a shower or bath.
This cheap, quick fix is helpful for anyone concerned about safety in the bathtub. Follow these easy steps to achieve non-slippery surfaces on your bathtub flooring any time you like! Then, enjoy safe bathing without worry!
You can check it to Hide a Bathtub
Why Bathtubs Get Slippery ?
Bathtubs are slippery due to the accumulation of dirt, soap scum, and body oils. These substances cause bathtubs to become highly misleading, potentially increasing the risk of slipping. These substances also leave their mark with stains on bathtub surfaces that are difficult to remove and unsightly. Therefore it is essential to ensure that your bathtub does not get slippery for your safety and hygiene purposes.
How Do Bathtubs Get Damaged?
About 95 percent of all homes in America have a bathroom, and over 90% of all bathrooms have a bathtub. Bathtubs are usually made out of porcelain or enameled cast iron because they are easy to clean and durable. Still, it can also be damaged without proper care and attention. There are many reasons why bathtubs get damaged; they get injured because people do not know how to take care of them properly.
One of the most significant ways bathtubs gets damaged from the bathroom faucet spout. Unfortunately, most people do not know that they need to clean the faucet spout regularly because it can quickly become clogged with dirt and built-up soap scum. When the faucet spout is clogged, it can cause water to back up into the bathtub and damage the caulking around the edge of the tub. In some cases, it can even cause water to seep underneath the bathtub and damage the flooring underneath.
Another way that bathtubs can get damaged is by using too much soap or detergent when bathing. Over time, all of that sudsy residue can build up on the surface of the tub and cause scum to form. Most people will not see this, but it is still there. If enough suds are built up inside a bathtub, they can cause damage to the finish on the porcelain or cast iron material by eating away at it very slowly.
One of the most common problems with soap buildup in a bathtub is that people often try to clean out all of those soapsuds by using harsh chemicals which can strip off the protective coating on them over time. The best way for anyone to solve this problem is to use less soap when taking a bath instead of cleaning out all of those soaps after each tub because it does more harm than good in the long run.
Precautions While Making Bathtub Non Slippery
There are certain things you should do to make your bathroom non-slip-proof. While cleaning, don’t focus on making the tub or tiles shiny and clean only, but make sure all the parts like soap dish, shower floor mat, and other accessories are free from slippery substances such as water. After bath time is over, make it a point to dry off your surface after bathing with a soft towel instead of standing for hours in wet condition.
If any part looks dim and dull, clean it properly using detergent and scrub harshly (not necessarily) instead of using chemical polishes, which can cause further damage to your bathtub’s shine by filling up cracks and scratches. While trying to clean soiled areas, do not use abrasive powders or liquids, making your bathtub look dull and bumpy. While buying cleaning products for the bathroom, check their labels and read reviews to know whether they work on non-slippery surfaces and will make them anti-skid.
When you find a texture in lines or dots that is slipping away from under your feet while bathing, then it simply means that your tub’s finish has worn off due to years of usage; result: ruined shower experience! Now, if such mishaps happen, you must either get the entire bathroom resurfaced by professionals who have well-equipped tools like grinders and resurfacing materials, etc., or DIY unique-looking texture on the surface of your bathtub, which will make it non-slippery.
Tips For Making Bathtub Non Slippery
There are a few very easy tips that you can follow to make your bathtub less slippery and dangerous. One way is to install a grip tape or sticker on the bottom side of the tub, which will provide some extra traction while bathing. You can also use a liquid sealant or wax polish to make the surface water-resistant and less slippery. Finally, in case of emergencies, when someone falls in the bathtub, always keep a first-aid box handy with all essential items like bandages, gauze pads, adhesive tapes, scissors, etc.
First Aid for Bathtub Falls
Injuries from slipping and falling in a bathtub can be fatal too. So, always keep your first aid kit handy near the tub; its location must not be far away from the area where you usually stand while bathing. If you notice any signs of bleeding after an accident like a cut or wound, then clean it with plenty of water to wash out germs and dirt, which may lead to infection. After cleaning, use adhesive tape or a bandage over the cut part to get immediate relief. Always take the injured person to the doctor immediately to treat deep wounds.
Conclusion
I hope you have obtained a clear conception of how to make bathtub non slippery. Esnure all the precautions while performing the process. Thank you and have a nice day!
Check it out also – How to Clean Cat Poop From Bathtub.
