An electric fence is a great way to keep animals in or out of your yard. While electric fences are not as strong as traditional barbed wire ones, they can be used to create a perimeter around your property that will shock anyone who touches it. Electric fence chargers come in many different shapes and sizes and can be found at hardware stores or online for a reasonable price.
Making an electric fence hotter may seem complicated, but there are a few things you can do to ensure that your barrier is powerful enough to keep the animals away. So, this article is for you. You will learn how to make electric fence hotter with just one simple trick!
Step to Follow on How to Make Electric Fence Hotter
Step One: Determine
First of all, the homeowner should figure out how he wishes his fence to be electrified. A hot wire on one side of the fence and a cold wire on the opposite will constitute an electric fence without any ground or buried wires whatsoever.
He can also bury an insulated copper wire in the ground next to his fence posts, running it around the outside of the fence and hooking it up to an electric fence charger. However, this will be very costly if he has a long fence. However, if his property is large enough, burying a hot wire may be better because it is less expensive than covering a large amount of ground with cables.
If his fence is not long enough for a hot wire, he should hook up both a hot and cold wire to the electric fence charger. The two wires or cables should be placed on opposite sides of the fence post. If he chooses this method, he will need to dig holes five feet deep and drop into three-foot metal fence posts with hooks on the top made of square-shaped steel, not round.
Step Two: Drive in Metal Posts
Once the homeowner determines how he wants his fence to be electrified, he should use a hammer drill with a long bit to drive steel posts into the ground alongside his fence. The holes that these posts are driven into should be five feet deep because the bottom two-and-a-half feet of each post will go underground.
The post on a dry day should first be watered before it is driven into the ground to not bounce out of place or split from pressure. Once the homeowners have their metal posts set in concrete, they need to attach insulated wires with hooks onto each to attach their electric fence charger to the cables.
These cables can be purchased from a hardware or farm supply store or ordered online. The homeowner has the option of either purchasing hot, and cold wire electrification for his fence, or he can opt to purchase one strong wire to use as both an electric and ground wire.
Step Three: Attach Wires and Fence Charger
The homeowner may now attach his wires to each metal post. He can use a screwdriver or wrench with insulated handles to connect the bare wire of one cable to the hook on top of his fence post. A twist-on terminal should be used to secure this connection, not a wire nut.
The hot wire is added onto the opposite side of the fence post, using another twist-on terminal to connect the two wires. Usually, it is less dangerous if both wires are on one side of the fence post rather than placing one hot wire and ground wire on each side.
The homeowner may not see this because his eyesight has worsened, so he wants to knock down his fence charger because he doesn’t know where it is. Finally, he needs to attach a hot wire from the positive terminal on his electric fence charger to one of the wires at the top of the fence post.
Step Four: Mark and Dig Ground Wire
The homeowner may now mark out the position of his ground wire. Then, on a dry day, he should go outside and dig a five-foot-deep hole. He will then drop in three metal fence posts into the holes that were searched for them. If digging is prohibited on his property or too difficult for him to do, he may opt to purchase three metal fence posts with hooks at the top.
The metal posts should be dropped into each five-foot hole after hammering five feet deep with a hammer drill. The homeowner should make sure that the hooks on each post are facing downward so he can attach his ground wire to them.
If the holes were dug deeper than five feet, they would need to be filled with concrete once the metal fence posts have been dropped into them. He needs to let this concrete-filled hole dry out entirely before he can attach his grounding wire. This will help in how to make electric fence hotter.
Step Five: Maintain the Electric Fence
The homeowner may now attach his grounding wire onto the hooks on the metal posts. Once he has done this, he can lay out the ground wire that is attached to each of these posts across the entire length of his property. However, if it gets into any trees or shrubbery, he should place it further away from them, so they do not get damaged by it.
The ground wire attached to any wires on the top of his fence posts should be placed about a foot away from these wires in a straight line. However, if a metal post is set up in a curved fashion, he needs to lay out the ground wire in a curve that matches the shape of the fence post.
You can check it to Remove Vines From Chain Link Fence.
If you need to make an electric fence hotter, here are some tips. First, when setting up the fence for hotwire or barbed wire fencing in dry weather conditions, it is essential that the ground be moist and not packed with too much mud. This will allow electricity to flow through more quickly because there isn’t a lot of moisture on the ground.
Second, if using wet-weather hotspots in wet spots where animals can drink, place them higher than they would typically be placed so that water does not pool around them, this blog post has given helpful advice on how to make electric fence hotter.
Check it out also – How to Tighten a Fence With a Come Along .