How to Move a Bed Without Taking It Apart

There may come a time when you need to move your bed. Of course, you don’t want to take it apart and put it back together again, but how do you get the bed up those stairs? Well, there are many ways of moving a mattress without breaking the frame.

How to Move a Bed Without Taking It Apart

For example, if you have an extra room on the first floor of your home or apartment building, all you will need is to slide the box spring and mattress down two flights of stairs. This method will require some help from friends or family members, though, because it’s difficult for one person to carry both pieces at once 

If this isn’t an option for you, try using furniture sliders; they’re inexpensive and can be picked up at most hardware stores. It is essential to know how to move a bed without taking it apart.

Step to Follow on How to Move a Bed Without Taking It Apart

Step One: Remove the Mattress

To remove the mattress, take off all bedding, followed by taking out any under-mattress support. For example, if you have a bunkie board, a flat piece of wood that’s placed on top of the box spring before adding sheets, you’ll need to remove it from underneath your mattress carefully.

Remove the Mattress

Next, carefully lift the mattress and set it on its side against a wall. Make sure to give yourself enough room to work around the bed as you disassemble it. The headboard is usually attached to the bed frame with metal rods or screws if any are present.

Step Two: Disassemble the Bed Frame

With your mattress flat on its side, take a look at the headboard and footboard. If they’re both made of wood, no MDF or particleboard, see if you can use a wrench to unscrew anything that’s holding them together. This will save you from having to pry the boards apart.

If there are metal rods to take out, you’ll need to use either a wrench or pliers. The rods screw into the wood with small screws located at each end of the rod. If they’re stubborn, don’t force them; something may be wrong with them, and you risk snapping if you apply too much pressure.

Step Three: Slide the Box Spring Onto the Floor

Once you’ve removed the headboard and footboard, your box spring may be resting on top of whatever was holding them together. This makes it easy to lift the box spring over whatever was holding it down. The boards should be held in place by screws or nails to avoid sliding once you lift the box spring.

However, if your bed is like mine and held together with dowels metal rods, use a wrench to unscrew the bottom of the wood attached to the end of each rod. Remove any screws or nails that might still be left in place before taking off the box spring; they’ll make it easier to remove the dowels. They are usually located near the headboard and footboard.

Step Four: Remove the Bed Frame

Once both the headboard and footboard are separated, take off any remaining screws or nails that might be holding them together. Also, don’t forget to unscrew any pieces of dowels still attached to either board. As for the actual bed frame itself, remove any screws or nails that could remain in place.

Removing the Bed Frame

These boards should be easy to lift and remove by hand or with the help of a wrench if they’re stuck in place. Use a large piece of cardboard or an old blanket to protect the floor from scuffs and scrapes before setting any of these pieces down.

Step Five: Slide the Box Spring Back Onto the Bed Frame

Now that you have your bed frame completely disassembled slide your box spring back onto the frame. Make sure to lift either end of your box spring enough to place it on top of where it’ll rest when reassembled.

Before putting the headboard and footboard back on, make sure the hardware is all in place. This means the screws and dowels should slide back into place. Once everything is nice and secure, turn your bed right side up and screw it all together.

You Can Check It Out to Make a Bed Look Like a Couch

Step Six: Reattach the Mattress

After putting the headboard and footboard back on with either screws or dowels, carefully set your mattress flat onto its side. Then slowly lower the mattress back onto the box spring. Once you’ve done this for both corners, make sure your bed is in its proper position before putting on all of your bedding about halfway down the mattress.

Enjoying Your New Living Space

Your bed should feel like new after following these six simple steps! You can then put everything back on your bed and decorate it as you like. Just make sure not to place anything too heavy on top of your bed; it could break if you have a headboard. This will help in how to move a bed without taking it apart.

Step Seven: Enjoy Your New Bed!

Congratulations! You’ve successfully moved your bed without taking it completely apart or using any tools. It’s now time to put everything back on the bed and start enjoying your new living space. If you have a headboard, remember not to place anything too heavy on top of it as this could cause damage.

And voila! You’ve successfully moved your bed without taking it completely apart or using any tools. Now that you know how to move a bed without taking it apart, have fun with deciding what décor you’d like for your new home.

Conclusion

Moving a bed can be an arduous task. There are usually many screws and bolts that need to come apart, the mattress needs to be taken off, and then it is hard to figure out how to get everything into your new place. If you don’t want all of these extra steps in moving your bed from one room to another, there is a way around this hassle!

With the help of some furniture straps (or even rope), someone else can move your bed for you as if they were carrying it on their back like a backpack. The article has been a good guide on how to move a bed without taking it apart.

You may read it: Bed Riser Alternatives

Smart Home Pick
Logo