How to Open Apartment Gate With Cell Phone

Cars are expensive, that’s no secret. However, if you live in an apartment complex with a gate, your car is more than just expensive. Your vehicle becomes the key to your apartment, and without it, you won’t be able to get in when you come home at night or even leave for work in the morning. 

How to Open Apartment Gate With Cell Phone

Unfortunately, with all of the people living in apartments these days, there are bound to be some who forget their keys, or maybe they’ve lost them entirely! So if this sounds like something that can happen to you, fear not because there is another option. 

You can use your cell phone to open the gate! There are many advantages of using this method over inserting a key into the slot used for opening the gate. So, this article is for you. You will learn how to open apartment gate with cell phone with just one simple trick!

Step to Follow on How to Open Apartment Gate With Cell Phone

Step One: ​Install the Phone Holder

Firstly, you will need to install the phone holder. Put the screws into two points with a screwdriver and then fasten them by tightening with your hand. Once they are in place, the phone holder can be secured by tightening it even more with a wrench or pliers if necessary.

Install the Phone Holder

There are two types of holders. It is recommended to use an adjustable arm that allows you more choice when mounting your phone. The clamping holder can be used if the frame on your gate has a maximum width of about three inches, but it may not hold larger or heavier phones securely enough.

Step Two: Mount the Phone on the Holder

Put your phone into the holder with your preferred method, whether by laying it along its back or standing it up in portrait orientation. Ensure that nothing is covering any part of the phone that could push against any button and interfere with its normal operation when you are done.

This includes putting your hand in the clamp for the stand orientation or having something against the side of your phone, such as the keypad on a flip phone. If you are placing it on its back, make sure that nothing is pressing against or touched by your phone, which would cause it to vibrate and dial numbers or activate any application unintentionally.

Step Three: Mount Holder to Gate

To attach the holder to the gate, first mark where you want it to go with a pencil. Next, remove the holder and make sure that you place it on flat, level metal or wood. The smoothest surface is recommended but not necessary if there are no sharp edges.

Attach the holder using screws long enough to penetrate both of the materials you are fastening together fully. Make sure they are firmly in place before putting the holder in. Fasten the screws with your hand until they are tight, then use a wrench or pliers to tighten them even more if needed.

Step Four: Test Phone Holder to Ensure it is Secure

Once everything has been bolted down securely, your phone should still be able to move freely but not so much that it will fall out of the holder. Test it by turning your phone sideways and making sure that it does not move in the holder.

If you are using a clamp-style holder, make sure that nothing is pressing against any part of your phone which could cause unintentional vibrations or presses on certain buttons. These steps should help you in learning how to open apartment gate with cell phone.

Step Five: Set Cell Phone Lock Code and Test

Once you have confirmed that everything has been put together correctly, put a password on your phone to prevent people from opening the gate without your permission. If you need help setting a lock code on your phone, many online tutorials will teach you how to do this.

Once everything is set up and working correctly, the keypad is back in place and replaces the screws in the front of your gate over them to not be seen. If you would like, you can paint over the holes left by the screws to look as though everything is original.

Step Six: Other Options

Other options for opening your gate include using the fingerprint sensor on your phone. However, some of these scanners are located in less convenient locations, such as under a button on the side of the phone, which can cause problems if you try to unlock it while it is lying flat and need to flip it over.

Another option would be to get a remote control and attach it to your gate so that you can open and close it from a distance. These remotes usually work with car entry systems to be compatible with newer cars on the road today. Also, this will help in how to open apartment gate with cell phone.

Step Seven: Make Sure Everything is Working Correctly

Make sure that your phone works with your gate to open and close it. If it does not, there may be a problem with arranging cords under your battery panel or somewhere else in the wiring system. Have someone look at it who has experience fixing these types of problems for you to make sure everything is set up properly.

Make Sure Everything Is Working

Double-check that you have the proper cords connected in the right spots and attached to the phone. If your gate still does not open with a cell phone, you may have a broken wire or defective parts which need to be replaced. It is essential to make sure that everything is set up correctly and working as intended before closing it back up again.

Step Eight: Hide the Cell Phone Entrance

When everything is working properly, you can put your phone keypad back in its original location and hide it as though nothing had ever been changed. Of course, you’ll need to know the phone number of the apartment complex office or security gate in case you ever need to call them in an emergency.

Make sure that there is a phone number on the gate somewhere, in addition to a list of emergency numbers in case you ever forget your phone number and cannot get into the building. This way, someone will be able to contact you when trying to open up from the outside.

Step Nine: Maintain System

Once your gate is set up with a cell phone, you will need to make sure that everyone who uses it knows the security code or phone number to call into the main office. If your password is compromised, inform the office immediately so that they can reset it.

Making sure your system runs smoothly is important because people will often forget their codes and may require access to you, at least until the phone number has been changed again to avoid further problems with security.

Step Ten: Replace Batteries

If your phone’s batteries are running low, you will not be able to open the gate. So be sure to keep enough new batteries on hand so that you can always get into your apartment complex. To be safe, it is best to assume that the batteries are getting low and replace them before they run out completely.

Keep Enough New Batteries

You can find replacement batteries online or at your local electronics store if you do not have time to wait for shipping. Replacing the batteries yourself will save you time and money compared to sending your phone in for repair or buying a new one completely. In this article, you will read how to open apartment gate with cell phone.

Step Eleven: Hire Someone Else to Do It

If you are not up for the challenge, you can hire someone else to do it instead. Company’s specializing in home gate security will be able to deal with any problems that may arise caused by your cell phone not opening your gate. Some companies charge a minimal fee for coming out and making the changes, while others may charge more depending on what they have to do.

If you are unsure which company is best for the job, ask other residents in your apartment complex who have had something similar done recently by which company can give you the best value for your money. Be aware that you will likely have to pay a fee each time someone comes out and makes changes to your system, but that it should be much cheaper than if you hired an actual contractor to do the work.

You can check it to Fix Gap in Chain Link Fence Gate.

Frequently Asked Question

Can a Ring Doorbell Open a Gate?

The Ring Doorbell has the ability to open a gate, but it will require you to have an account and subscription.

If you don’t have an account or subscription with Ring, then you can use your smartphone’s camera and microphone as a security camera. You’ll need to install the app on your phone and create an account for this feature.

Can Electric Gates Be Forced Open?

Yes, electric gates can be forced open. The best way to do this is by inserting a long thin object such as a screwdriver or broom handle into the latch release on the side of the gate and then pushing it in.

If you cannot find anything that will work, then you can try using your body weight to force the gate open.

Does the Ring Work Without Wifi?

The Ring work without wifi, but it is not recommended. Ring devices use cellular technology to connect with the user’s phone and send notifications. The Ring app needs internet connectivity in order to function. If your phone doesn’t have a data connection, then you won’t be able to receive notifications from the Ring device.

Ring Devices Use Cellular Technology


If you have a locked gate and can’t get your cell phone to work, there’s still hope. Luckily for you, we’re here with some quick tips on opening apartment gates using just your cell phone! First, check the cords and make sure they’re plugged incorrectly.

Double-check that it’s your cell phone and not someone else’s. If you still can’t get it to work, try changing the batteries! If the problem persists, you may have a defective part or a broken wire that needs to be replaced inside your gate. This blog post has given helpful advice on how to open apartment gate with cell phone.

You can also check it out: How to Install a Liftmaster Sliding Gate Opener

Smart Home Pick