How to Open Kwikset Lock

When Kwikset locks are installed onto a door, they have an emergency keyhole on the side of the lock. This is for situations when you need to get in but don’t have your keys. The process involves using a pin or paper clip to push down on the tab inside this hole while rotating it with one hand and pushing up on the doorknob with your other hand.

How to Open Kwikset Lock

If that doesn’t work, try twisting the knob until you hear a click, which means it has unlocked! If you’re still struggling, you can also try using a bobby pin or guitar pick. So, this article is for you. You will learn how to open Kwikset lock with just one simple trick!

6 Steps to Follow on How to Open Kwikset Lock

Step One: Remove the Inside Cylinder

You may have seen a locksmith open a door on TV, and he can pop the lock open by sticking a long metal rod into the keyhole. Once inside, this tool will rotate the lock’s inner workings and allow a person to unlock a door without a key!

This method can be done with a Kwikset lock, but it is not recommended to try it yourself. It can be challenging to remove the inside cylinder, and if you are not careful, you could damage the lock. If you have a Kwikset lock and need to get inside, your best bet is to call a locksmith.

He will be able to open the lock for you in a matter of minutes, and he will have the proper tools to do so. If you are locked out of your home, there are a few other methods that you can try before calling a locksmith. One uses a credit card or driver’s license to try and pop the lock open.

Step Two: Use a Credit Card or Driver’s License

Another method that you can try to open a Kwikset lock is by using a credit card or driver’s license. This will work if the lock is not too damaged. You will need to insert the card into the keyhole and then push down on the lock while turning the card.

Pushing Down on the Lock While Turning the Card

If the lock is damaged, you will need to insert the card and twist it at a 90-degree angle. Then, you should apply some pressure to pull the lockdown and see if you can get it open. Another method is inserting a flathead screwdriver into the keyhole and turning it counterclockwise.

It is possible that with enough force, you can pop the inside cylinder out of place. If this happens, try to put it back into place by pushing it firmly into place. Be careful because the screws are tiny, and they may fall onto your garage floor. This will help in how to open Kwikset lock.

Step Three: Using a Flathead Screwdriver

If you cannot open the lock with a credit card or driver’s license, you can try using a flathead screwdriver. However, this method is a little more dangerous because you will be prying open the lock with the screwdriver. Instead, you should insert the screwdriver into the keyhole and then twist it counterclockwise.

Open the Lock With the Screwdriver

Be careful not to damage the screws on the lock. If you can pop open the lock, you will be able to remove the inside cylinder and gain access to your home. If you have a Kwikset lock, you mustn’t use the inside cylinder to open your door.

This may void any warranty on your lock, and it can also damage the mechanism. If this happens, call a locksmith to fix the problem. It takes less time for a locksmith to open a Kwikset lock than it does for you to try and fix it on your own.

Step Four: Using Bobby Pin

If you are locked out, the last method to try is by using a bobby pin. A bobby pin will not be strong enough to pop open the lock, but it may help you move the inside cylinder. You will need to use two bobby pins and insert them into both sides of the keyhole on top of each other. 

Use a Bobby Pin

Then, you will need to push down on the lock while turning the pins. This may help you move the inside cylinder so that you can unlock the door. If none of these methods work, it is best to call a locksmith to open your door for you. He will have the proper tools and knowledge to get you back into your home in a matter of minutes.

It is best to call a locksmith if you cannot open the lock on your own. The process of opening a Kwikset lock is dangerous and should only be done by someone who knows what they’re doing. These steps should help you in learning how to open kwikset lock.

Step Five: Using Picks

If you are a locksmith trying to open a Kwikset lock, the best method to use is his picks. Picks are small tools that help you unlock the lock by popping the inside cylinder out of place. You will need to insert the picks into the keyhole and then twist them until you remove the inside cylinder. 

This may take a little more time than some of the other methods that you can try. However, it is the most effective way to open your lock without damaging it. All locksmiths should have these tools and know-how to use them effectively so you will always be able to get back into your home in no time at all.

You should never try to open a Kwikset lock on your own if you are not a locksmith. The process is dangerous and can damage the lock. It is best to leave this job to the professionals who know what they’re doing. If you are locked out, call a locksmith, and he will be able to help you get back into your home.

Open a Kwikset Lock

Step Six: Maintain Your Kwikset Lock

It is important that you keep your Kwikset lock in good condition so that you do not have to go through this process again. You can do this by using a lubricant on the mechanism every few months. This will help keep the lock moving smoothly and prevent it from getting stuck.

You can also keep the lock clean by wiping it down with a dry cloth. If you do this regularly, you will not have to worry about being locked out of your home again. It is also essential to keep track of your key. If you lose it, call a locksmith and have him cut you another one so that you do not have to go through the process of trying to open the Kwikset lock again.

The best thing that you can do for this type of lock is maintained it properly to avoid being stuck outside of your home. In addition, it is best to keep the lock clean, lubricated, and maintained if you want to avoid this problem in the future. All of this information will help you learn how to open Kwikset lock.

Keep the Door Lock Clean

You can check it to Lock a Sliding Glass Door From the Outside

Why Is My Kwikset Lock Not Unlocking?

One of the reasons you should replace the lock on your front door is that it can get jammed. In this case, removing it from its frame should be easy enough if you pull the handle outwards and upwards. However, if you have to twist and turn it to remove it from the frame, there might be a problem with the cylinder.

If that is the case, you have to bring it to a locksmith to repair or replace it. This article will deal with problems that are not related to the lock’s function but rather with its appearance. With time, Kwikset locks accumulate gunk and grime inside the keyhole, which can prevent the key from entering the lock.

In order to clean it out, you will need a small object that can fit inside of the hole such as a paperclip or a toothpick. It would help if you first tried to insert the object into the hole and then wiggle it around to loosen up any dirt or grime inside the keyhole.

Conclusion

Kwikset locks are a great way to protect your home, but if you’re ever locked out of your house and can’t find the key, don’t panic. All you need is a credit card or house key that’s bent into an L-shape. Please insert it into the bottom slot on top of the lock while pushing down with one hand and turning counterclockwise with another presto!

You’ll be able to open even tough locks in no time at all. Our team is always happy to provide advice about how best to keep your home safe and secure for when life throws unexpected curve balls our way. The conclusion paragraph is informative and provides information on how to open Kwikset lock.

Check it out also – How to Bypass Lid Lock on Maytag Washer.

Smart Home Pick
Logo