Magnetic child locks are a great way to keep your little ones safe and out of areas that they should not be. However, the problem with these devices is that once you lose the magnet or become too weak, you can no longer use them.
Luckily, there is one thing you can do to open magnetic child locks without a magnet! The answer lies in removing the screws from either side of the door frame so that when you pull on the lock, it will slide right off, and then all you need to do is replace those two screws, and voila! No more locked doors for your toddler!
This post highlights how to open magnetic child locks without a magnet by removing some screws from either side of your door frame. Next, I’m going to show you how to open magnetic child locks without magnets.
7 Steps to Follow on How to Open Magnetic Child Locks Without Magnet
Step One: Locate the Screw
The first thing you would need to do is locate the screw that holds the lock in place. For example, if your child’s locks are magnetic, there will be a small screw on one side of the lock that needs to be removed to access the magnet.
It may be on the top or underneath, depending on how it is designed. If you cannot find the screw, check the other side of the lock or on top of the lock.
Step Two: Locate the Magnet
Next, you will need to locate the magnet. The easiest way to do this is by sliding a small screwdriver or any small metal object under the appeal to slide it out. If your child’s locks are magnetic, there should be a ball bearing behind the magnet that needs to be removed.
Be careful not to lose the ball bearing as it is small and could roll away. If you cannot find the magnet, you may not have a magnetic lock. If this is the case, you will need to call a professional or research how to open child locks that are not magnetic.
Step Three: Cover the Magnet
The next step in learning how to open magnetic child locks without a magnet is to place something over the magnet once it is removed from the safety. This will prevent the ball bearing from rolling away while you are trying to open the lock.
You can use your hand, a small piece of paper, or anything else to cover the magnet. This will allow you to easily slide out the ball bearing without having it roll away.
Step Four: Slide Out the Ball Bearing
To start opening locks that are not magnetic, begin by taking off any caps on top of the lock. Once you have done this, carefully slide the small metal object you used to get under the magnet through one of the holes in the lock. When your metal object is inside the lock, get ready to slide out the ball bearing behind the magnet.
If there are any caps on top of your locks, they should quickly come off. Once they are off, slowly slide the ball bearing away from the magnet. It is important not to drop this as it is small and can be easily lost. If you drop it, try to find it with a flashlight or gently shake your lock for it to fall out.
Step Five: Remove the Screw
The next step in learning how to open locks that are not magnetic is removing the screw. There should be a small one on one side of your lock to remove the screw. Once you have found it and removed it, slide off any caps to see the actual screws underneath them.
There may be more than one screw, but this is normal. Once you have removed all of the screws, slowly slide off the metal part to access the spring inside. If you cannot find any screws, check underneath or on top of your lock for a small screw holding it together.
Step Six: Slide Out the Spring
You may need to slide out your spring if you cannot find any screws. If this is the case, take off all caps on top of your lock except one. Keep one cap on for you to handle it without dropping anything inside of the lock.
Once you have done this, slowly slide the spring to the side and out of your lock. Be careful not to lose it as it is small and elementary to drop. If you drop it, try to find it with a flashlight or gently shake your lock for it to fall out.
Step Seven: Open Your Lock
Now that you know how to open locks without magnets and can locate and remove the ball bearing and spring, you should be able to open your lock easily. Slide the ball bearing in the opposite way it originally was when you were removing it.
You can also try sliding the spring back into place if this is what you originally had to do before taking out your spring. Once you have done this, slide the metal object you used to get under the magnet over the top of the ball bearing and screw tightly with your hand. You should now be able to open your lock without using an interest.
If you cannot get the ball bearing and spring out, you will need to call a professional or find other ways online to open locks that are not magnetic. However, these steps should help you in learning how to open magnetic child locks without magnets.
You can check it to Magnetic Curtain Rods Work .
Frequently Asked Questions
Can You Open a Magnetic Child Lock?
Yes, it is possible to open a magnetic child lock. To Do This, You Will Need to Take the Following Steps :
- Find the metal key and insert it into the slot on the left side of the door handle.
- Press down on both sides of the handle at once with your thumb and forefinger until you hear a click sound indicating that the lock has been unlocked.
Can You Break a Magnetic Child Lock?
There are different types of locks that are used for the purpose of keeping your belongings safe and secure. These locks can range from mechanical keys and digital keys to smartphone apps. The most common type of lock is a magnetic lock which uses magnets to keep items in place when they are inside the container or room in which they have been placed.
To break a magnetic child lock, you need something like an electromagnet or an ion spinner.
Do You Open a Child Lock Drawer?
A child lock drawer is a device that locks the drawers and cabinets of a piece of furniture, usually in children’s bedrooms.
It prevents children from accessing and removing items from the drawers and cabinets and prevents any adults who are not meant to be there from entering.
The main function of a child lock drawer is to keep children safe by locking away potentially harmful items that may have been put there by someone else without their knowledge or permission. It also keeps them safe from themselves because they cannot open it if they are not allowed to do so.
Conclusion
If you have a child who can’t keep their fingers to themselves, it might be time to invest in magnetic locks for cabinets and drawers. These are the perfect solution if your children want access to things they shouldn’t touch or eat.
Magnetic locks don’t require any special tools, just a strong magnet! So avoid taking up valuable kitchen space with traditional cabinet latches by installing these convenient devices today.
Remember this tip when shopping around for new furniture as well- many options come equipped with magnetic latches from the factory now, so all you need is a high-quality magnet to go along with them. We hope you enjoyed this article on how to open magnetic child locks without magnets.
You may also read: How to Open Magnetic Lock Without Key
