How to Pick a Steamer Trunk Lock

The advent of the steamer trunk lock has changed the way we store our treasured items. First, make a secure seal; two locks need to be opened up simultaneously. The easiest way to do this is by using one’s fingers or toes, but it can also be done with another object such as a stick. Next, twist the dials until they both reach the same number. The steamer trunk lock will now be secure and you can add a padlock for extra security.

How to Pick a Steamer Trunk Lock

Once you have found an appropriate place for your lock, insert the key and turn it clockwise several times before releasing it from its position. This will cause both locks to open at once, which will allow you access to your trunk! In this article, we’ll explore how to pick a steamer trunk lock. You will need a few tools to pick a steamer trunk lock.

10 Steps to Follow on How to Pick a Steamer Trunk Lock

Step One: Open Up

Most steamer trunks are not locked. If the trunk is locked, you’ll need to unlock it before moving forward. The best way to do that is to take a flathead screwdriver or your fingernail and pry the lock cylinder open for it to release its pins. Be careful when using a screwdriver since you don’t want to end up ruining the lock! Once the lock is open, you can access the interior of the trunk.

Step Two: Locate the Pins

Before you start this step, understand that there are two types of pins in a lock. One is called the driver pin, and the other is called the key pin. The difference between these two pins will play into what you need to do next to pick the lock. If you have no clue what I’m talking about, you should read this article on how locks work. For most locks, you’ll need to find the first pin that binds. This is done by trying different pins, but listening for when the plug feels like it’s binding.

Step Three: Identify the Pins

Now that you understand which pins are which, it’s time to tell them apart using a paperclip. Depending on the type of lock you have inside your steamer trunk, there is a way to go about picking it. Be sure to read this article on how locks work to understand the differences between these two types of locks. The first step is to identify which type of lock you have.

Step Four: Insert a Paperclip

Some locks have two different pins that need to be picked. In this case, you have one paperclip. To start, put the paperclip into the lock and push it in until it stops going anymore. When this happens, wiggle or lift on the end of it, allowing you to feel when the lock has been successfully picked.

Step Five: Turn the Paperclip

Once you have lifted on the paperclip, turn it in a clockwise motion. Clockwise means that you’ll be turning it away from your body when looking at the front of the lock. Keep turning until one side is in place or until the lock has come undone. The lock will fall out of its place, and you’ll have successfully picked it!

Step Six: Unlock the Steamer Trunk

If your steamer trunk is locked open, then skip this step because there’s no need to pick it if you don’t need to! If not, take the time to unlock it now. You can do this by turning it with your hand or taking the time to unlock it with a key. This way, you’ll know for sure that no one has gone into your trunk without permission!

Step Seven: Check out the Content

Now that your trunk is unlocked go ahead and open it up! It might be filled with dirty items like an old shirt, or it might be filled with pieces of locked treasure. Either way, you can go ahead and take a look! Who knows, you might find something worth taking back to your home.

Check out the Content

Step Eight: Put Everything Back

Once you’re done looking at the trunk and its content, put everything back where it should be. This will help to keep things neat and findable in the future. You don’t want anyone else inside your trunk, so always remember to lock it up as soon as you can!

Step Nine: Take the Stuff Home

If you were to find something in your trunk that was not yours, then leave it be! The same goes for if you find something you want to keep. These things can be taken back with you; after all, it is said and done. So if you take anything out of the trunk, make sure to put whatever was to stay back inside!

Step Ten: Clean Your Trunk

With your trunk open, go ahead and take the time to clean it. This will make sure that you never find another thing opening up your steamer trunk. If you want to keep finding extraordinary things in it, always remember to clean it out from time to time. This will keep it fresh and ready to go!

Clean Your Trunk

How Do You Open an Old Trunk Without the Key?

For many people, the locked trunk of an old steamer trunk is just another obstacle to overcome. However, if you want to learn how to pick a steamer trunk lock, it’s essential to understand why these locks are difficult to open without the correct key. Secure locking mechanisms were not created until later in the 20th century.

Before that, the idea was to create a box that could be locked shut with as little investment as possible. These locks were not made for security purposes; rather, they were developed so people would not have to carry around separate keys. Thus, these early trunk locks look a lot like padlocks.

They usually consist of a flat dial on the outside of the lock, with three numbers on it. To open a steamer trunk from this period, one would turn the dial until they lined up the numbers to line up with the base of the shackle.

The tricky part is that there are several million possible combinations, so it’s unlikely someone could guess which number to start with or complete the process in a short amount of time.

Frequently Asked Questions

Can You Pick a Lock on A Steamer Trunk?

No, you cannot pick a lock on a steamer trunk. The key to opening a steamer trunk is found inside the lid and is only accessible by using a key or combination.

What Types of Trunk Locks?

There are many types of trunk locks. They Can Be Classified Into Four Different Categories :

  • Key Lock – this type of lock is operated by a key and is the most common type.
  • Combination Lock – this type of lock uses a combination of two or more keys to open it.
  • Electronic Keyless Entry System – these locks use an electronic code that is provided by the manufacturer to open them with the push of a button.

What Is the Top of A Trunk Lock Called?

The top of a trunk lock is called the “trunk latch”. The first part of the name comes from its use to secure the trunk lid. The second part of the name comes from its function as a latch for securing car trunks and cargo compartments in vehicles.

Can You Replace a Trunk Lock?

You cannot replace a trunk lock, but you can make it harder for someone to break into your car. A great way to do this is by installing a new alarm system. You should also keep your spare key somewhere else so that if someone does manage to get in, they will not be able to start the car without first taking out the key from its hiding place.

Replace a Trunk Lock


We hope that this information has helped determine which trunk lock will best suit your needs. Steamer trunks can come with various locks, so it is essential to know what features you need and want before purchasing one.

If all of the options sound overwhelming or unfamiliar, we recommend speaking to an expert about how they compare and contrast steamer trunk locks for sale online today. At this point, you should feel confident that you know how to pick a steamer trunk lock.

Check it out: How to fix window locking mechanism.

Smart Home Pick