How to Put a Lock on a Door Without Drilling

Do you ever find yourself in a situation where you need to put a lock on your door, but there is no hole for the doorknob? Even if there is, drilling holes in your door can be an expensive and time-consuming project. Luckily for us, we have some other options!

How to Put a Lock on a Door Without Drilling

One way to add locks without drilling into our doors is by using Command Hooks with Command Strips. These hooks are specially designed to stick onto surfaces like paint or wallpaper and can also be removed without damaging these surfaces when needed.

This means that they’re perfect for renters who want to keep their apartments looking good while still adding locks at any time. In this article, we’ll explore how to put a lock on a door without drilling.

Step by Step Guide on How to Put a Lock on a Door Without Drilling

Step One: Purchase a Lock

The first thing that you should do is to go out and buy the lock. Make sure that it fits your door before purchasing it, as not all locks fit all doors. Also, make sure to purchase a lock for each side of your door one for each side, as this makes the process much easier overall. The type of lock that you are buying depends on what is most suitable for your specific needs.

Purchase a Lock

If you have a door that is made of metal, then perhaps a deadbolt would be best. However, if the door in question is wooden, then a standard keyed lock might be more suitable. Whatever type of lock you choose to go with, do not forget the other necessary items, such as drill bits for drilling screwdrivers and replacement door hinges. These are necessary for the installation of the lock itself.

Step Two: Determine which side you want the lock-on

The next thing that you will need to do is determine which side of your door. If your current doorknob is already on the exterior part of the door, then you cannot put a lock on the same side as it is currently located.

If so, then you can either move it or install the lock on the other side. However, if your current knob is on the interior part of your door, then you can put the new deadbolt on either side. Once you have determined which side will be the new lock side, move on to step three.

Step Three: Remove your door’s Hinges.

You will need to remove the hinges from the door before placing a deadbolt on it. The easiest way to do this is to unscrew them from the exterior part of your door using a screwdriver. However, if your door has hinges on its interior part, skip this step as you will not need to install new ones.

Remove your door's Hinges

Once you have removed the door’s hinges, place them on your work surface so that you can easily access them later on, as you will need to replace them with new ones once the lock installation is finished.

Step Four: Mark your new Hinge Placement

You will need to mark the location of your new hinges before you screw them into place on the exterior part of your door. For instance, if you install a deadbolt on the left side of your door, you will need to determine how far in from the edge of your door the new hinges should go.

Use a ruler, tape measure, or other tools to determine this distance. First, mark your measurements on the exterior part of your door, then take out the deadbolt you purchased and use it as a guide before marking where your new hinges will go.

Step Five: Screw in your New Hinges

After you have marked the locations of your hinges using a pencil or marker, it is time to screw them into place. Make sure that they are straight before doing so, as this also helps to ensure that they are installed correctly and will not fall out later on.

When screwing in your new hinges, try to use the same holes that were originally in your door. If you are having trouble lining them up, just drill new ones in the locations you have marked after the lock has been installed, as this is much easier than trying to unscrew them all. Also, this will help in how to put a lock on a door without drilling.

Step Six: Put the Lock in Place

After screwing the hinges into place, then you can begin to put the lock-in. Use a drill with a drill bit suited for your specific lock type to make two holes on each side of your door where your new hinges are located. Be sure not to have these holes too close together, or else you will not be able to use them with the lock.

Set the deadbolt into place once you have made the holes and screw two screws through each hole on each side of your door. Using a drill is recommended here, as well as it ensures that they are screwed incorrectly and will not come loose later on. Drill bits for drilling can be purchased at Ace Hardware, Lowe’s, or your favorite home improvement store.

Step Seven: Replace the Door Hinges

Once you have placed your lock onto the door and are sure that it is installed correctly, then you can go ahead and replace the hinges on both sides of your door. Then, place each hinge back into its location on either side of your door and screw them in using a screwdriver.

Be sure to tighten the screws; otherwise, they might come loose at a later time. You can choose to use new hinges or replace the ones you had just removed, as it does not matter which ones you want to use. However, if your old hinges are still in good shape, you should not need to replace them.

Conclusion

It is possible to put a lock on your door without drilling holes in it. This article provided an overview of some popular methods for securing doors with locks, as well as the benefits and drawbacks of each method.

Whether you’re looking to reinforce your security or want to avoid any permanent marking on the door itself, this post has shown you how many options there can be when deciding what type of lock best suits your needs! At this point, you should feel confident that you know how to put a lock on a door without drilling.

You may also read – Types of wood for doors.

Smart Home Pick
Logo