How to Reinforce Cube Shelves

A cube shelf is a great way to store items in your space. But if you notice your shelves tipping over or warping, there might be a straightforward fix that can make them sturdy again: adding support boards. This blog post will show you how to reinforce those cubes and keep them standing strong! 

How to Reinforce Cube Shelves

It’s time for me to do some spring cleaning, and I’ve been trying to figure out where everything should go. As I was thinking about what storage solutions I could use, something dawned on me: my bookcase toppled over because it just wasn’t reinforced enough.

So before getting started with the organization part of this project, the first thing we’re going to do is reinforce these shelves, so they don’t topple over anymore! So in this article, we’ll explore how to reinforce cube shelves.

5 Steps to Follow on How to Reinforce Cube Shelves

Step One: Determine the Shelf’s Load Capacity

The first step to reinforcing your shelf is knowing how much it can hold. The label of the shelf will tell you if the frames are expanded metal mesh. If the label does not indicate this, remove a shelf from the carton and look for dots on one corner.

If there are two dots, then the shelf is expanded metal mesh. The label will also indicate the size of the shelf in inches and pounds. In order to calculate how much weight a shelf can hold, there are two equations that you must know.

A simple way to determine the safe load capacity of a shelf is to multiply the width of one bin by the number of containers and then multiply that number by 50 pounds. However, there is another more complex method that includes multiplying by 25 instead of 50.

Step Two: Make a Bucket Hoist

The second step in reinforcing your mesh shelf is to make a bucket hoist. Again, using materials that are available around the house, you can easily construct this simple convenience. Items needed for this step include one plastic container with a lid, an elastic band, two small wood dowels or posts, six feet of string or twine, two clothespins, and one key chainring.

Reinforcing the Mesh Shelf

To make the bucket hoist, take the lid off the plastic container and slide it over one dowel or post to become a pulley. Next, attach an elastic band to the open side of the lid’s hole to act as a belt for the other dowel or post. Finally, stick the poles into the bottom of the container.

Tie a string to one side of the vital chainring and secure it with a clothespin so that you can attach it to either post. If you want, you can also link the other end of the string to an empty bucket to use as a weight to raise the load.

Step Three: Attach the Shelf to the Pulley

Attach one end of your mesh shelf to the bucket hoist that has been created. Next, use zip ties or twine to secure the mesh shelf securely to the pulley. Then, attach a weight to the other side of the string if you have not done so already. As an alternative, purchase a shelf that has a built-in pulley system.

Most of these systems require no assembly and cost about the same as the mesh shelves without the convenience of a pulley. Once you have attached your shelf to the pulley, attach another one of the dowels or posts to the other side of the shelf.

Knot one end of your string around this post so that it can be used as a support for this shelf as well as a balance. If you want, place a weight on top of the shelf to make it easier to lift it with the bucket hoist.

Step Four: Place the Weight on Top of the Shelf

The next step in reinforcing your mesh shelf is to place one weight on top of the shelf. This will make it easier for you to lift with your bucket hoist if you want. You can purchase a weight at any department store or store, or you can use an old water bottle filled with sand and taped shut.

 Water Bottle Filled With Sand

Although the weight is not vital to reinforcing your shelf, it can be pretty helpful if you are trying to lift heavy objects. With this method of reinforcement, you will be able to carry even heavier items than before. Another alternative is just purchasing a mesh shelf that comes with a built-in pulley system.

These shelves are reinforced and not as likely to bend as the original. This will make it easier for you to lift the highest loads with your mesh shelf. Once this step is done, you can begin to use your reinforced mesh shelf for whatever project you are working on! This will help in how to reinforce cube shelves.

Step Five: Use Your Mesh Shelf

Now that your mesh shelf has been reinforced, you can begin using it! Although these shelves are not as strong as other products on the market, they are quite versatile and easy to use. You can place objects of many different weights on top of your mesh shelf without having to worry about bending or other problems.

Mesh Shelf Has Been Reinforced and Begin Using It

Although these shelves are not perfect for carrying heavy objects, they can be a vast improvement over the original mesh shelf you used to have. You can use your reinforced mesh shelf for anything from organizing to storing items in the garage or storage unit.

It is a cheap and effective way of reducing clutter! If you want, you can purchase or make a mesh shelf with a built-in pulley system instead. This is not only easier to use but also reinforces the shelf even better than this method. However, both of these methods are excellent ways to reduce clutter and organize your home without spending too much money!

You can check it to Remove Built in Drywall Shelves

Conclusion

Whether you need to reinforce your cube shelves or not, we hope this article has helped answer some of the questions about these storage units. We provide a wide range of shelving for all sorts of purposes and want our customers to make informed decisions about their purchases.

If you have any further questions, please feel free to contact us at any time. We look forwards to hearing from you! Finally, we hope you enjoyed this article on how to reinforce cube shelves.

Check it out also – How to Reinforce Trusses in Roof .

Smart Home Pick
Logo