If you own a Sunbeam electric blanket, there’s a good chance that at some point, you’ll need to remove the cord from it. Whether you’re moving or storing your blanket or want to clean it, it is essential to know how to do this. So here’s a guide on how to remove cord from Sunbeam electric blanket. Remove the top fabric from the blanket. Locate the end of the cord that’s attached to the control unit. Using a pair of needle-nose pliers, carefully grasp the metal tab on the cord.
Electric blankets can be a great way to keep warm during the winter months, but they can also be a safety hazard if not used correctly. One of the main hazards of electric blankets is the cord, which can quickly become tangled or caught in bedding. In addition, it can be a safety hazard, as it can easily lead to the cord being yanked out of the wall socket.
What is Electronic Blanket?
An electronic blanket, sometimes called an electric blanket, is bedding that uses electricity to heat up and keep you warm. Electronic blankets can be made from various materials, such as cotton, fleece, or wool. They are available in multiple sizes, shapes, and colors to match your style and comfort needs. Electric blankets are designed to be placed on top of your regular bedding, such as sheets and blankets. Most electric blankets have a control panel that allows you to adjust the heat settings.
The most common type of electronic blanket is the heated blanket. Heated blankets use electrical coils to heat up and keep you warm. They are available in various sizes, shapes, and colors to match your style and comfort needs. Some people prefer to use electric blankets during the winter months. Other people like to use them all year round because they offer a more consistent temperature throughout the night. There are also some electronic blankets that have a built-in timer.
A Detailed Guide How to Remove Cord From Sunbeam Electric Blanket
Step 1 :
When the cord is tangled, it increases the risk of injury. Therefore, you should always ensure that your Sunbeam electric blanket is unplugged before making any repairs or cleaning it. Do not hang the electric blanket over anything.
The first thing you need to do is locate the two plugs on the electric blanket. One pin will be at each end of the blanket. Once you have found the plugs, unplug them from the blanket. Make sure to unplug them both completely. Once they are unplugged, find the cord that connects the two plugs together. The cord is located in the middle of the blanket. Pull on the cord until it comes out of the blanket.
Step 2 :
Next, unplug the plugs from each other. To do this, you will need to hold onto one pin with one hand and use your other hand to pull the different plugs out of the socket.
Step 3 :
Once you have unplugged the electric blanket, it is time to remove the cord. There are two ways to do this: manually or with a tool.
If you want to remove the cord manually, you will need to use a pair of scissors. First, cut along the fabric where the cord is attached to the blanket. Be careful not to cut the cord itself. Once you have cut the fabric, pull the cord out of the hole.
If you want to remove the cord with a tool, you can use a seam ripper. This is a small tool that looks like a safety pin. Use the seam ripper to cut through the fabric where the cord is attached to the blanket. Once you have cut through the
Now you need to take off the fabric cover of the electric blanket. To do this, you will need to find the snaps around the edge of the fabric. There should be four or five snaps in a row.
Step 4 :
When you have located the snaps, use your fingers or a small object like a pen to press down on the center of the snap. While holding down the snap, use your other hand to slide the fabric cover off of the electric blanket.
Step 5 :
Now you need to remove the cord from the electric blanket. To do this, you will need to find the hole in the fabric where the cable comes out. The spot is usually near one of the corners. This will help in how to remove cord from Sunbeam electric blanket.
Step 6 :
Now, you will need to remove the cord from the blanket. To do this, locate the small hole at one end of the cord. This is where you will insert a pin or paperclip to release the catch.
Once the catch has been released, pull on the cord until it comes loose from the blanket. Be careful not to tug too hard, as this could damage the plug or socket.
If you have any problems releasing the catch, please consult your Sunbeam electric blanket’s instruction manual for further guidance. Removing the cord from your electric blanket is simple and should only take a few minutes.
Step 7 :
Once you have removed the fabric cover, you should see the wire connecting the plugs. Use a pair of wire cutters to snip through the cord. When you have done this, pull on both ends of the wire to remove it from your Sunbeam electric blanket. Cut off the excess cord using scissors. Make sure to leave enough cord to plug the blanket in.
Step 8 :
When you have removed all of the wires from your electric blanket, it is time to reattach them. Plug one end of each wire into their respective plug on the blanket. Push the cord back through the hole, and then tuck it inside. This will keep the cord from getting tangled or caught on anything. Then plug those two plugs back into a socket and test them to ensure they are working correctly.
Now you have successfully removed the cord from your Sunbeam electric blanket! Enjoy your new, cord-free blanket! It is also good to check your electric blanket regularly for damage and replace it if it is worn or damaged. Sunbeam offers a 2-year limited warranty on
You can check it to Crochet a Scalloped Edge on a Granny Square Blanket
Precautions
- Unplug the electric blanket from the wall before beginning any work.
- Make sure you have a good grip on the cord before you start to pull.
- Do not tug at the cord forcefully, as this could damage it.
- If the cord is stuck, try wiggling it back and forth gently to loosen it.
- If you cannot remove your cord, do not continue to pull on it. Instead, seek assistance from an authorized repair agent or other professional.
Frequently Asked Questions
Can You Wash and Dry Sunbeam Electric Blanket Safely?
Yes, you can wash and dry Sunbeam electric blanket safely. However, if you use the permanent press or gentle cycle setting in your washing machine, keep in mind that the water level must never exceed the fill line for either compartment.
Do not use chlorine bleach to clean Sunbeam electric blanket because this will cause damage to the wires and could present a shock hazard. Instead, use a mild detergent and cold water to clean your electric blanket.
Can You Iron Sunbeam Electric Blanket?
Yes, you can iron Sunbeam’s electric blanket. However, you should use the lowest setting on your iron and avoid placing it over any metal snaps or zippers, as this could damage them.
Can I Put My Electric Blanket on High Heat?
No, it would be best if you never put your Sunbeam electric blanket on high heat. The heat could damage the wires or cause a fire hazard. Instead, always use low or air-fluff settings when drying your electric blanket.
Conclusion
So, now you know how to remove cord from Sunbeam electric blanket. You don’t have to worry about it catching on anything or tripping over anymore! Sunbeam electric blankets are a convenient way to keep warm during the winter.
However, if the cord becomes damaged or tangled, removing it from the blanket can be difficult. Nevertheless, it’s been an enlightening experience – we hope that your next project is as easy as this one!
Check it out also – How to Make a Woobie Blanket
