How to Remove Nail Polish From Bathtub

It can be such a pain to remove nail polish from your bathtub! We’ve all done it. It’s not fun, but luckily there are some ways you can fix the problem and avoid this frustrating situation in the future. The first thing that comes to mind is acetone, which will break down the nail polish, but it will also dissolve any soap scum or buildup on your tub as well.

How to Remove Nail Polish From Bathtub

This is great for those who have hot water because they’ll need to do less scrubbing. However, if you don’t want to use acetone, try using baby oil instead – it usually works well! So, this article is for you. You will learn how to remove nail polish from bathtub with just one simple trick!

Step to Follow on How to Remove Nail Polish From Bathtub

Step One: Determine Type of Nail Polish

It is essential to determine the type of nail polish before attempting to remove it from the surface. Most dyes and some glitters will be impossible to remove if traditional methods such as acetone are used ultimately. Solvents for removing gel or shellac manicures will also not work on removing all the polish.

If the nail polish on the acrylic surface is chipped or old, it can be peeled off with the right kind of solvent. Most minor dents on the surface can also be removed by applying acetone or rubbing denatured alcohol to them and then working out the polish while it softens.

When no other option is available, sandpaper will eventually work on all kinds of nail polish. While sanding gel polish is not advised, the other types will eventually wear down. Therefore, it is recommended to use a fairly coarse grit paper until the area feels smooth before moving on to more acceptable grades of sandpaper.

Step Two: Apply the Solvent

If the nail polish cannot be removed with acetone-based nail polish remover, it can usually be dissolved using a stronger solvent. However, even if acetone can remove all of the polish on its own, it is often not recommended to use it on some surfaces because it may damage them.

Oil or petroleum jelly will work on removing nail polish from leather or vinyl surfaces. However, these types of solvents will also leave the surface feeling greasy, which means that it must be properly cleaned. Solvents and acetone-based cleaners can often dissolve certain plastics and resins if they are applied with a q-tip and left on the area for several minutes.

Petroleum Jelly

Oil-based makeup stain remover will not work on water-based nail polish, so it is necessary to purchase the right kind for this type of solvent. Using too much of certain oils can also cause damage to some materials, which means that only a small amount should be used.

Step Three: Remove the Polish

Applying the solvent to the polish will often leave behind an oily substance that must be removed. A soft sponge can be used on some materials, but it is recommended to use a mixture of soap and warm water on many surfaces. Any additional residue should then be washed away with soap and warm water.

The solvents may also remove some of the polish and the oil or grease on porous and non-porous surfaces. It is possible to recover some of this polish by using a little straight acetone on a soft cloth, but this substance will not work on all types.

All of the residue and extra bits of polish should be scrubbed away with a sponge or paper towel before using any other type of solvent. This can make the area slippery and potentially cause someone to fall when they step in it.

Step Four: Wash the Surface

All of the oil or grease should be washed away from the surface with soap and warm water. If soap is not available, a mixture of vinegar and water will work just as well on most surfaces. Some acetone-based solvents can instead be used on these surfaces if all else fails.

Any polish that was recovered should then be shaken or scraped onto a piece of cardboard. A sheet of newspaper will work in a pinch, but any surface that is not absorbent can be used. This type of polish can usually be reused once more on another person’s nails before it begins to dry out.

If the fingernail polish can be removed entirely with acetone, it should still be washed away from the surface afterward. Failure to do so may leave behind a sticky substance that will attract dirt and other substances over time. This will help in how to remove nail polish stain from bathtub.

Remove Nail Polish Stain From Bathtub

Step Five: Apply Baking Soda

After all, the polish has been removed, and the surface washed, it is finally time to apply baking soda. This can be done by rubbing a handful of it over the entire area with a clean sponge or towel. Any remaining residue should then be wiped away before drying completely with another clean cloth or towel.

If the excess nail polish stain has been removed with a solvent, applying baking soda instead of soapy water is recommended because grease will often contaminate it. The baking soda can then be rinsed away before drying completely with another towel or clean cloth.

Then, the fingernail polish should be applied typically to ensure that it is evenly spread. There should be no problems removing it after using this simple method instead of using harmful chemicals or other methods that tend to damage surfaces.

You Can Check It Out to Get Purple Shampoo Stains Out of Bathtub

Step Six: Maintain the Surface

Cleaning oil or grease stains with baking soda is one method that can be used to maintain many surfaces. This includes bathtubs, floors, and other materials that are not damaged by this substance. The best way to keep these items clean is to wipe them down with a mixture of vinegar and water at the end of every day before drying them with a clean towel.

Baking Soda

Oil and grease will quickly accumulate over time, so these surfaces should be kept as clean as possible. Failure to do this may cause permanent damage that is expensive to fix or even dangerous if someone slips on the substance and falls.

You can check it to Felt a Shed Roof Without Nails.

Conclusion

Removing dry nail polish from a bathtub may be tricky, but it doesn’t have to be. The quickest and easiest way is with an acetone-based polish remover, as this will dissolve the nails without damaging the surface of your tub. In addition, you can also use baking soda or vinegar if you don’t want to purchase any special products for removing nail polish from fiberglass bathtub.

All three methods work well on porcelain surfaces and should produce similar results when dealing with light-colored baths. The conclusion paragraph is informative and provides information on how to remove nail polish from bathtub.

Smart Home Pick
Logo