How to Remove Permatex Rearview Mirror Adhesive

Have you ever had a problem with the rearview mirror coming loose on your vehicle? Unfortunately, this is a common issue that many drivers face. This blog post will discuss how to remove Permatex Rearview Mirror Adhesive from glass and plastic surfaces. 

To properly clean the surface where the adhesive was applied, use an acetone-based polish to remove the adhesive. Be sure to test this product out on a small spot of glass or plastic before applying it to the entire surface. Then, remove all traces of polish with soap and water, rinsing thoroughly.

How to Remove Permatex Rearview Mirror Adhesive

Apply a liberal amount of either one of these liquids onto the area where the residue is leftover from removing the adhesive and wait about five minutes before wiping it off with a lint-free cloth or paper towel. Avoid using water or other harsh chemicals to remove the glue since they may leave streaks or smudges on the glass.

Step to Follow on How to Remove Permatex Rearview Mirror Adhesive

Step One: Clean the Mirror

Make sure to wash and dry your mirror before starting the next step. This ensures that no dirt or particles will get in the way of what you are doing or get on your hands later on. You can use a hairdryer to quickly dry off any excess moisture left behind by the towel, but do not allow any water to remain behind.

I would also recommend that you wash your hands at this point so that any grease from the mirror itself will not get on your mirror, causing your new adhesive not to work properly. The last thing you want is your mirror to fall off while driving, potentially causing an accident.

Step Two: Get Your New Adhesive Ready

If you are replacing the rearview mirror’s original adhesive, you should have purchased a roll of the replacement stuff before starting this project. While you can likely find the Permatex product at your local automotive store, you may have to visit a hardware store if there is no such thing as an auto parts store available in your area.

Get Your New Adhesive Ready

The package should come with detailed instructions on how to remove and replace the mirror’s adhesive, but just in case it does not: cut off a portion of the adhesive and cut it lengthwise so you can attach it to your mirror. Also, make sure you use a section of the backing paper that is easily removable; otherwise, your new adhesive may not come off as cleanly and evenly as you want it to.

Step Three: Remove the Existing Adhesive

Make sure to use a tool with a sharp edge so that the adhesive will come off as cleanly as possible. We used a metal letter opener, but even a single-edge razor blade would work just as well if you have one available. Be careful not to scratch the sticker itself because any damage here will be seen in your final product.

The idea is to get under the old adhesive so you can pry it off of the surface, not slice through it. You should remove most of the adhesive with this method, but if there are some pesky bits left behind, then use a rag or paper towel soaked in rubbing alcohol to clean up any residue.

Step Four: Attach Your New Adhesive

Do not attach your new adhesive without cleaning off any leftover residue from the old stuff; otherwise, you will have to remove the piece again and repeat this process all over again. Once it is clean, pull away from a small portion of the backing paper so that it becomes easy to align your new adhesive.

Use the Same Side to Attach Your Piece

It is best to use the same side to attach your piece as the side removed in Step Three, but this is not always possible. It will be fine to use either side, though! If you’re interested in learning more tips on how to remove permatex rearview mirror adhesive, continue reading.

Step Five: Admire Your Work!

Since this is a finishing step, you should wait until after your adhesive has dried before taking a look at your work. We recommend waiting about thirty minutes to ensure that the adhesive is completely attached before you move on to the next step; otherwise, you may accidentally pull your new piece off of the mirror’s surface.

If everything worked out as planned, you should have a brand new rearview mirror with a freshly installed adhesive that will hold just as well as its predecessor. Remember that your adhesive is not permanent and can be removed without too much trouble, so feel free to replace it again if you ever need to take the cover off for any reason.

Step Six: Maintain Your New Rearview Mirror

Once your new adhesive is installed, you should maintain it as best as possible. If any dirt or dust collects on the adhesive’s surface during drive time, you will have to remove the piece and reattach a new one, so make sure to wash off your mirror regularly.

Maintain Your New Rearview Mirror

You can use water from a garden hose or even a bucket, but be careful not to soak the adhesive if you are using water. Keep the piece as dry as possible while still removing any grime that it may have accumulated. You should also avoid placing your windshield wipers against your mirror’s adhesive because this will likely cause them to break off once they dry out after use.

Conclusion

If you are interested in removing Permatex Rearview Mirror Adhesive, we recommend using a razor blade to scrape the surface clean of any residual adhesive once you have done this, use rubbing alcohol or Windex on an applicator pad and scrub with firm pressure for about five minutes.

This should loosen up any remaining adhesive residue that may not be visible after scraping it with the razor blade. Make sure to wear gloves when handling these products as they can irritate the skin if touched! In this blog, we’ve laid out a few tips on how to remove permatex rearview mirror adhesive.

Check it out to learn – What To Do If Someone Hits Your Car While Its Parked

Smart Home Pick
Logo