Fence installation is a tough job. You have to take the time to plan the layout of your fence, measure out your fencing materials, and install them properly. But there are some instances where you don’t need to do all that work, such as installing woven wire fences on uneven ground or other similar situations where it’s better for you not to use posts.
If this sounds like something you want help with, take a look at the following guide. We’ll go over how to use woven wire fences on uneven ground and give you some helpful tips for doing it correctly. So, this article is for you. You will learn how to run woven wire fence on uneven ground with just one simple trick!
7 Steps to Follow on How to Run Woven Wire Fence on Uneven Ground
Step One: Determine
First, you will need to determine how much fence you need and what type of job will require the Woven Wire Fence. If you do not know which one is best for your situation, look at the buyer’s guide in this article. It provides an overview of different types of fencing so that each person can decide what is best for their homestead.
If you do not have a lot of uneven ground, you can use plain wire. This is the easiest to set up and will be good for most people new to living off-grid. If you need a fence that makes it almost impossible for animals to get through, the woven wire may be the best option.
It will keep in most types of livestock and will help protect your crops from varmints. However, it is not the best option if you have a lot of uneven ground and trees and shrubs that may be difficult to move. While it can be adjusted for this type of job, it may cause unnecessary stress on the fence.
Step Two: Prepare Your Area
The Woven Wire Fence is not often used on uneven ground, so you may have to do a lot of preparation. However, if the fence will be placed over a large area with significant amounts of uneven ground, it will be much easier to install if it has been prepped first.
Get a flat piece of land that can be used for this job and where the fence will also be helpful. You must make it flat, or the wire may not lay flat and cause pressure points in the fence. If this area has already been used for fencing, then the best course of action is to remove all old wires before adding new ones.
You can use a combination of manual labor and machinery, but it is best to use machinery because the area will need to be perfectly flat and level. You can rent a machine that will do this for you or pay someone to come out and do it. These steps should help you in learning how to run woven wire fence on uneven ground.
Step Three: Place the Woven Wire
The next step is to place your woven wire fencing. Make sure that it is flat and well level. If you do not, you will have to take out the wires and put them back in, which can be incredibly difficult. The best way to make sure that it is level is by using a laser leveler.
While getting the job done manually is much easier and faster with a laser leveler. You will also be able to check for any issues easily if you use this method. You will need to place braces next to each post that goes into the ground not to move while under pressure from animals or humans leaning against them.
Add the braces the same way that you would for a plain wire fence. The braces should be about eighteen inches long and placed at ten-foot intervals down the post. Make sure that you have enough braces so that they cannot be easily knocked over or pushed down.
Step Four: Attach the Woven Wire
The woven wire fencing must be attached to something, whether an existing fence or a new one. If connecting to an existing fence, attach the wire to the existing fence like you would attach a plain wire fence. This can be done with a baling machine, but it is best to do it by hand to do the job properly without any issues.
If attaching to new posts, you will need to do more than just cut the wire and secure it. First of all, there are unique staples that need to be used for this job. They have a wide base, so they will not go through the woven wire and leave loops. The staple should sit just above the post without being too high or too low.
If it is too high, the animal may get its leg caught in the fence because of the space left underneath. If it is too low, the animal can bend down and get its head caught in the fence easily. If you want to find out more about how to run woven wire fence on uneven ground, keep reading.
Step Five: Anchor Each Post
When you anchor the posts to the ground, be sure that they are sturdy enough so that there is no way for an animal to knock them over. They may dig under it and uproot it, which means another step of moving the fence and stapling it in a different location.
You can either use bracing or concrete to anchor each post. If you are using bracing, use whatever bracing you have used before for your other fences. The same goes for if you are using an existing fence as your anchor instead of concrete.
There are different options available for this step, so be sure to choose the right choice for this job. For example, you can either use small concrete blocks to attach the posts or use metal stakes, such as those used to anchor tents.
You can check it to Run Electrical Wire in Unfinished Basement
Step Six: Test the Fence
After everything has been done, you should test your fence to make sure that it works correctly. Stand in front of the fence and pull each post to make sure they are stable and not loose at all. If a post is loose, you will need to add more bracing or concrete until it is secure again.
If there are any issues with your fence, you can either fix them now or contact a professional to handle the job. It will make the fence last longer if it is done correctly and by someone who has experience doing this kind of work. Once tested, you should fill in the holes from the fixing process and wait for everything to settle for a few days.
If your fence is next to a road or other area used often, you should consider painting the wood posts with high-quality paint that will last a long time. All of this information will help you learn how to run woven wire fence on uneven ground.
You Can Check It Out to: Stretch Field Fence on Uneven Ground
Step Seven: Maintain the Fence
Once the fence is installed, you will need to make sure that it stays solid and intact. If a post starts to come loose or move, you should consider adding more concrete or bracing or even putting in new posts. If the woven wire becomes loose, then you can tighten it by hand.
Cut out any loose parts of the fence with a pair of wire cutters to avoid an issue. You do not necessarily have to replace the entire section of woven wire, but it will likely work better if you do. If you use this fence for heavy grazing animals, consider adding another step to the maintenance process.
After taking care of loose parts, consider running a light coat of tar or paint over the fence to protect it from animals chewing on it. You can glue heavier pieces of wood in front of it so that they will not break through the rest of the fence so easily.
One thing you should note is that most fences have a limited life span. However, a fence can last longer if you maintain it regularly. This means checking the posts and woven wire every few weeks or coming up with a plan to ensure that your fence stays strong as time goes on.
You can check it to Stop Grass From Growing Under Fence.
Frequently Asked Questions
Should You Level the Ground Before Installing a Fence?
It all depends on your specific situation and what kind of fence you are installing. If the fence will be located close to any roads, then it may be advisable to level the ground in order to avoid potential damage during construction. On the other hand, if your fence will only contact soil at certain points, leveling the ground might not be necessary. Ultimately, it is important to consult with an experienced contractor if you are unsure of how best to proceed.
How Do I Keep My Woven Wire Fence Tight?
Keeping woven wire fencing tight is a crucial part of keeping your property secure. Here are a few tips to help you do just that:
1. Make sure the wire is properly tensioned – The tighter the wire is tensioned, the more resistant it will be to potential intruders.
2. Check the wire regularly for signs of wear or damage – If there are any signs of wear or damage, take corrective action as soon as possible. This will help keep the fence in good condition and prevent any potential accidents.
3. Inspect the fence for broken or missing pieces – If any pieces of the fence are broken or missing, replace them immediately. This will help keep your property safe and secure at all times.
4. Regularly clean the wire – Keeping the wire clean will help to prevent pests and insects from entering the fence and causing damage. Use a mild soap and water solution to clean the wire thoroughly, then allow it to dry completely before using it again.
Do Horizontal Fences Sag?
This can cause damage to the fence and create a safety hazard for pedestrians and pets. In some cases, it may also be difficult to attach or remove gates from the fence because of the sag.
To prevent this type of issue, it’s important to periodically check your fence for signs of wear and tear and make any necessary repairs as needed. You can also use tension bands or weights to help pull up sections of the fence so that they don’t hang down below ground level.
Conclusion
If you are looking for a fence to protect your property, it can be challenging to determine what type of fencing will work best. Wire fences often seem like the obvious choice because they offer protection and security at an affordable price. However, wire fences need to be installed on flat ground to function correctly.
Installing a woven wire fence on uneven terrain requires some extra steps that we’ll outline below so that you can get started with this project as soon as possible, knowing all the necessary information beforehand! The conclusion paragraph is informative and provides information on how to run woven wire fence on uneven ground.
You can also check it out: How to Stop Soil Going Under Fence
