Not all construction works needs professionals on your pay roll. Though the need of professional builders is required for the construction and maintaining of buildings, not all works done by them needs professionalism as some of these works can be done by anyone with the right tools and knowledge.
One of these construction works that you could easily do yourself at home is learning how to sand drywall. Sand drying a wall is a very common construction technique used in finishing interior walls. Is basically a method used in finishing dry wall joints and smoothing of concrete walls. Sand drying a wall is normally done if you intend of painting or making use of wall papers for your interior walls. The technique of how to sand drywall fast, has many ways in going about its execution and can be done with a few set of construction tools. Below is an outline on how to sand drywall:
The first step in sanding drywall is getting the right tools and proper gear for the work. The process in performing a sand drywall produces a great amount of dust, that easily spread across the whole room you did be in. so before the start of work, to avoid looking around a room full of dust particles floating in the air, assemble all needed tools in a visible Conner of the room where the sanding will be taking place including a putty knife in filing of mistakes and an extra join compound. Due to the amount of dust that will be coming from the sanding, the wearing of a dust mask to cover the mouth and nose, googles for the eyes, and a helmet to protect dust on the hair is a must. The taping of plastic sheets across doors and other enclosed areas are also practiced by many to prevent the dust from spreading to other rooms and exterior windows should be open to allow for a good ventilation during sanding.
Next step is sanding the wall itself. The use of fine-grit sandpapers is kept on sanding blocks and then anchoring one end under the clamp and with a pull of sandpaper taut tighten the clamp on the other side. This method of sanding is used for better performance of sanding around the ceiling and top edges of the walls. Sanding should be done around seams, joints and screws gently with a sanding block while avoiding sanding in a one direction or in a straight line as this can cause depressions or grooves. The right way in sanding is to move in a circular or curved motion. A palm sander for drywall will be the perfect tool for sand drywalling. Most people could not like to make use of the palm sander for drywalling due to the great amount of dust it would make during the process. But when is all said and done the use of a palm sander in drywalling will indeed help in the perfect smoothing.
Sanding around gouges, grooves, or ridges can be challenging, so the best way to do it is by marking areas with a pencil and then filling them with a fresh joint compound and letting it dry completely before proceeding to res-sand the area. Lumpy spots or paper fuzz on the other hand can easily be gotten raid off by priming the walls then sanding gently.
Is at this point you will have to get raid off dusts on the wall. The use of vacuum cleaners or shop vacs are commonly used here in the getting rid of the dry wall dust. However, there is a dustless drywall sander that one can make use off, if dust is a concern in drywalling. Dustless drywall sanders, will be able to smoothing your walls without a globe of dust or fine particles enveloping the room.
Lastly, it is important to know, achieving how to sander a drywall quickly depends on the tools and knowledge of how to go about things and most importantly how ready one is in dealing with dust, a lot of dust.