Furniture is a beautiful addition to any home, but it can also be a safety hazard. The best way to prevent accidents from happening in your house is by securing furniture against the wall.
If you have baseboards that are too high up for you or hard to reach, there are still ways for you to secure your furniture! For example, furniture placed in front of an exposed baseboard could be tipping over the furniture if the floor is not strong enough to hold it.
Furniture against exposed baseboards can also present a safety hazard for children playing around the house, who may mistake exposed areas as places that are safe to climb on or play with. In this article, we’ll explore how to secure furniture to wall with baseboards.
Step to Follow on How to Secure Furniture to Wall With Baseboards
Step One: Layout Your Furniture
Use a pencil to mark where you want the piece of furniture to sit against the wall. Then, measure the height and width of your furniture and take down those measurements as well. This ensures you know what size screws to buy. If the furniture has no backing, follow this step:
Pull open a small section of your baseboard and place it against the wall, lining up its edge with the pencil mark. Next, trace around the outside of your baseboards with a marker. Now you can see where to put screws in, but not drill through your walls!
Step Two: Place the Furniture
If you have a computer desk, put it where you want it. It will be challenging to get behind there later, so do your best to get it right! If you have a bed frame or dresser, rest them on 2x4s, which are slightly shorter than the height of the baseboards.
The 2x4s will eventually be inside the baseboards and support the furniture. If the 2x4s are tall enough, then secure them with screws and keep going! If not, on either side of each leg of the baseboard, put a screw through the first layer of baseboard and into the top part of your 2×4.
Step Three: Insert Screws Behind Baseboards
Use a drill to put screws into the top back of your baseboards or into the wall itself. Make sure there is a stud behind wherever you are screwing! For computer desks and dressers, find your pencil marks again and drill screws directly through to where each leg meets the wall.
For beds without 2x4s to support them, use two screws per leg into your wall. That’s it! You have just secured your furniture to the wall with baseboards! However, if you ever want to move this furniture, do not just pick it up and begin moving it!
Step Four: Move the Furniture
Take off your baseboards! We recommend you keep them for future use. Then, pick up each leg of your bed and carefully move it to the new place you want it. Once you’re done, replace the baseboards and then screw them into your new wall.
If you have a computer desk or dresser with many drawers, it’s going to be very difficult to figure out where each drawer is supposed to go! Mark which ones are facing up so that you won’t have to guess which drawer is on top when they come out of place.
Step Five: Replace the Furniture
Put on a baseboard and carefully lay your furniture on them. Now, use a pencil to mark where each leg of your bed, desk, dresser, etc., should go. Remove those pieces of furniture from their bases and then use those marks as guides for where to drill screws into the wall or back behind the baseboard.
Once everything is level and lined up correctly, put screws into the wall or back behind the baseboard. Now you have successfully moved your furniture without ruining it! Congratulations! If you’re buying a new piece of furniture, repeat every step to secure it to your wall with existing baseboards in a snap! Bring this article along, so you know what to expect.
Step Six: Drill Screws Into the Wall
Put a screw into each wall stud for more secure furniture. This is especially important if you have a bed or dresser with many drawers, as those can be very heavy and potentially dangerous to your children or pets. Suppose you don’t know where the studs are; drill screws into the wall wherever are easiest!
Soon you will know where to put screws in for future furniture moves, and you can save yourself a lot of headaches. Just make sure to take photos of how everything is set up before you move the furniture! This will help in how to secure furniture to wall with baseboards.
Step Seven: Fill the Holes
If you drilled screws into your walls, just put a bit of wood filler into the holes and smooth it over with a credit card. If you have baseboards, smoothly lay down wallpaper or spackle to hide any visible marks from where you moved your furniture! Then smooth out that layer with a credit card to make it look nice and clean.
That’s it! You can now move your furniture around in a snap without having to worry about getting them back into place. This is very helpful if you have children or pets who could tip over a dresser because you won’t have to lift heavy furniture high above your head anymore!
Step Eight: Enjoy your Furniture
Now that you have your furniture securely mounted to the wall enjoy being able to move it around whenever you need to! Just make sure you do not try to pick it up by any area of the piece of furniture’s base.
If your bed is too tall for this method, secure each leg with screws outwards from the bed frame. That way, even if one screw comes loose, your entire bed won’t collapse! Now that you have your furniture securely mounted to the wall enjoy being able to move it around whenever you need to!
You can check it to Move Furniture Into an Apartment .
Frequently Asked Questions
Can You Use Command Strips to Secure Furniture?
Yes, Command Strips are excellent for securing furniture. It is easy to use and comes in a variety of colors to match your décor. It can be used on all surfaces, including wood, tile, laminate, or metal. You can also choose between different sizes like 12-inch or 24-inch strips, depending on the surface area you want to cover.
How Much Weight Can a Small Command Strip Hold?
There is no standard weight for a small command strip. The size of the strip and the amount of adhesive that it has will determine how much weight it can hold. However, you should not exceed more than 1 pound per square inch of surface area on the strip, which would mean up to 6 pounds per unit.
Do You Really Have to Attach Ikea Furniture to the Wall?
No, you don’t have to attach Ikea furniture to the wall. However, it is a good idea to do so because it helps prevent your furniture from toppling over and getting damaged. It is also a smart idea for kids’ rooms where there are often more obstacles like toys and other small objects that can get in the way of screws holding down the furniture.
Do I Have to Anchor Furniture to the Wall?
Anchoring furniture to the wall is a very common practice that many people have done in their homes. However, there are some who believe that it is not necessary and they don’t need to do this. Let’s understand what the difference between anchoring furniture to the wall and not doing so is.
When you anchor furniture to the wall, you are essentially attaching it with a nail or screw on one side of the piece of furniture and then placing another anchor at the other end of where you want your piece of furniture to be placed. The idea behind this is that if your child pulls on one side of a table or chair, then it will not come out from its place because of all the anchors being used for securing purposes.
Conclusion
In summary, you can use nails or screws to secure the furniture to your wall. However, you should also ensure enough space for a person to walk around the object and maneuver without hitting their head on it too often.
Also, if you have baseboards in your home, be careful not to damage them by securing items onto walls with them still attached to the flooring of your room. We hope this article helps! The article has been a good guide on how to secure furniture to wall with baseboards.
Check it out also – How to Sand Ornate Furniture .
