How to Stop Curtain Rings Catching on Extendable Pole

The rings on your curtain are catching on the extendable pole. This is a frustrating problem that can be solved easily by purchasing new rings or moving the pole to another location. If you are looking for an easy fix, consider replacing your curtain ring with one that has a more secure hooking mechanism, such as ones made of rubberized plastic. 

How to Stop Curtain Rings Catching on Extendable Pole

However, if you’re looking for something more permanent and aesthetically pleasing, then simply removing it from its current location and placing it somewhere else may be the best option to prevent this issue in the future. So, this article is for you. You will learn how to stop curtain rings catching on extendable poles with just one simple trick!

Step to Follow on How to Stop Curtain Rings Catching on Extendable Pole

Step One: Determine

First, you need to identify the pole your curtain rings are catching on. If your ring has a long wire, it is likely catching on one of the poles going up and down/up and over the window. This is a common problem with pole-mounted curtains, split at the top instead of being one continuous piece.

Pole Mounted Curtains

The split can leave a little gap that gives the curtain rings just enough room to get caught. If one of the other styles is catching, you’ll need to figure out which pole is causing the problems. You can do so by seeing which pole is causing your rings to get caught.

If it is catching on the top, you need to focus your energy on fixing it so that it doesn’t catch anymore. On the other hand, if it is grabbing at the bottom or multiple places like in between and the top, you will need to do both modifications; it’s OK to do them concurrently.

Step Two: Mark the Problem Area

You should start this step by finding the split in your curtain. If you don’t know where it is, then look at the fabric of the curtains to see if any lines indicate that there was once a straight line. The point where it splits will be where your rings get caught.

Once you’ve found the split, take a marker or something that can leave a mark and run it along the gap. You want to make sure to get both sides of the gap since rings will catch on both sides. This is also important because you will need this line in future steps to fix your curtains and rings, so make sure you make it visible and straight.

If you don’t see a line, the problem might be with rings catching on both poles of your curtain. In this case, you must mark both sides so that you can fix each pole at once instead of having to do them one by one.

Step Three: Cut Out Holes for the Pole

If you are dealing with poles that go up and down/up and over, you need to cut out tiny holes along the line you just drew. If your curtain is split at the top by only one pole, skip this step since there isn’t a way for rings to catch in this situation.

Cut the holes as small as you can because you want to minimize the amount of fabric missing from your curtain since it will make for a less sturdy curtain and will lead to the rings getting caught easier. If possible, try not to make holes but instead snip out tiny portions of the pole by using your patience and your scissors.

Try not to snip more than is needed since it leads to more trouble than you would like. If you are having trouble cutting out the holes, try tracing around the pole of one section using a pencil or another marker that can leave marks on the fabric.

Step Four: Test the Curtain Rings

Once you’ve completed your modifications, it’s time to test them out. Please take one of your curtain rings and try sticking it through one of the holes in your curtain. If it is much looser than before, you have done an excellent job of ensuring that they won’t catch anymore.

Extendable Pole

If you feel that it is still catching, you need to try snipping out more portions of the pole you’ve marked. Do so until your rings are moving smoothly through the hole and no longer getting caught before you move on to other steps.

If multiple poles are getting caught, repeat steps two and three for each one since it’s essential to ensure that your rings don’t get caught at any point on the curtains. These instructions will teach you how to stop curtain rings catching on extendable pole.

Step Five: Sew the Holes Shut

If you haven’t finished modifying all of your rings, then do not complete this step. However, if you have completed steps 2-4 and feel confident enough that your curtain rings won’t catch anymore, then it’s time to sew the holes shut for good measure.

Industrial Sewing Machine

The best way to do so is by using an industrial sewing machine or finding a person who does professional stitching. If you can’t do so, make sure at least one side of the curtain is free from holes and run them along those rows instead.

Concluding

To stop curtain rings from catching on an extendable pole, use a rubber band. This will create enough space for the ring to slide right over the top of the pole without getting caught in it and causing damage or injury.

While this may seem like a quick fix, you’ll want to be sure that your rubber bands are not too thick as they could cause problems with sliding past each other when trying to open and close curtains. If you need help, please contact your local store to find out how thick of a rubber band they suggest.

An intelligent way to stop curtain rings from catching on an extendable pole is by using a rubber band. This is because the space created when two or more rubbers encircle each other is enough for your curtain rings to glide right over and not suffer from wear and tear. We hope you enjoyed this article on how to stop curtain rings catching on extendable poles.

You can check it out also – How to Make Curtain Rings.

Smart Home Pick
Logo