How to Stretch Field Fence on Uneven Ground

I have a problem with my field fence. It is made of chicken wire, which is pretty standard for most people who keep chickens in their backyard or farm. The issue I’ve been running into is that my ground isn’t level. I had to put up this field fence around my garden because it was getting eaten alive by my dogs and rabbits.

How to Stretch Field Fence on Uneven Ground

It has worked great until now, but the uneven ground makes it hard to stretch all the way across without allowing some animals through. I’m not sure what kind of solution there would be for me, though, since I don’t want to get rid of this chicken wire fence that’s working so well at keeping out other uninvited guests!

I’m thinking about digging out the ground underneath the fence, but it might not be as easy as I think. So, this article is for you. You will learn how to stretch field fence on uneven ground with just one simple trick!

6 Steps to Follow on How to Stretch Field Fence on Uneven Ground

Step One: Determine

First, you have to determine if the ground is even or uneven. You can do this by observing how you step on the ground or just standing on it and moving your feet around. In areas that turn into a mud pit during the rainy season, you may want to dig down a few feet to where firm soil remains below the surface layer of loose soil.

Determine the Ground Type

This is a good indication that you can build a fence without sink posts in the ground. If the soil seems firm enough, proceed to step two. If not, use any of the techniques listed below to assist you in making your fence more robust and more stable on the ground.

If the ground seems like it won’t support the fence, then you need to dig down deeper until you can place your wooden or steel posts in solid soil. While digging down, however, make sure that the excavation process does not cause the ground to sink further. You do not want a shallow well of mud or sand under your fence.

Step Two: Mark Out

Once you have determined that the ground is solid enough, mark your fence line to the desired length. It would help if you did this rather than hire someone else to do it for you because others do not easily overlook measurements. Again, the less confusion about your fencing plan, the better, so you’ll want to ensure you are in total control of the process.

Also, this is an excellent time to create corner posts that will be installed into the ground for holding stability. You can do this by digging down below the soil’s surface enough, so you can put them in sideways, with one end being above ground while the other being buried.
This will ensure that the fence does not fall over if a corner post is broken or cut. It may need to be dug down again if animals cut up the fence, but this method will not be broken outright. These steps should help you in learning how to stretch field fence on uneven ground.

Step Three: Stretch

Once your line is marked and straight, you can now begin stretching the fence. Again, you can use various techniques depending on your preference and how skilled you make fences. For example, you could tie a length of rope to one end of the fence and pull it tight while standing at the other end.

Now Begin Stretching the Fence

It is easier if you have two people to stretch it out, so this is the preferred method. Another option is to attach a weight at one end while holding the other end in place while applying tension until it’s tight. This could also be done with three people pulling on the fence line while the third person makes sure that both ends are being pulled equally.

The more evenly the fence is pulled, the more durable and stable it will be. If you have one available to you, the last option is to use a device that hooks on both ends of the fence while applying tension until it is taught and straight. This method would involve walking backward while stretching your fence line out in front of you like some thread on a needle.

Step Four: Secure

Once your fence is pulled tight, you can then secure it to the ground by tying a rope around each post. The rope should be tied on one side of the post and then looped around to the opposite side of the post where it can be held down with rocks or some other heavyweight.

This will give your fence the extra stability that it needs to fight against strong winds or other disturbances. However, if your fence is strong enough, this could be completely unnecessary as the tension alone should keep it in place. Your next step will be to cut away any excess strands of wire or rope, so they are no longer visible or present on the exterior of your fence.

If you have any unwanted strands on the inside of your fence line, you can cut them out yourself with some wire sheers. However, if you want to ensure that the interior is free of these unnecessary parts, leave it like that and allow livestock or other animals into your pen. This will help in how to stretch field fence on uneven ground.

Step Five: Leave

At this point, you should leave your fence for a while so it can settle and take the shape of whatever ground it is standing on. This may not be necessary, but it will allow your fence to stretch out some more where the wire strand may have pulled too tight, or some other damage has been done to it.

After some time has passed, you can come back to your fence line and inspect it again. It would help if you did this regularly, at least once or twice a week, to see how it is standing up to the elements of the surrounding environment.

Your fence may be interfering with other aspects of your property; however, you will need to consider the pros and cons of any adjustments you could make. For example, if the fence is in a high-traffic area or it begins to interfere with your view of something important in nature, then there may be some steps you can take to move it somewhere else on your property.

You Can Check It Out to Attach a Fence to a Brick Wall

Step Six: Maintenance

Once your fence is in place, and the line has been set, it is a good idea to keep checking to make sure that everything remains secure. It would help inspect your fence at least once every two weeks during the growing season when things are going well for you and your livestock.  

Make Sure That Everything Is Secure

Any issues with fence security can be addressed in this time frame so that you are not being caught unaware if something terrible were to happen. You can use this method for just about any type of fencing, be it for your garden, livestock, or yard.

If there is a weak point in your fence line somewhere, then rust will begin to form on the wire strands, and they may become difficult to see by the naked eye. Thanks for reading about how to stretch field fence on uneven ground.

How Do You Tension a Fence Wire?

The best way to tension a fence barbed wire is to use a fencing stretcher. A fencing stretcher is used to stretch the bottom strand of wire tight. First, stretch the bottom strand tight, then attach it into the post with a ground driving cap or large staple. Next, stretch each remaining wire, starting with the one next to the corner post and ending with the top wire.

Use a Fencing Stretcher

Now, attach a fencing staple to each remaining wire and secure it to the post immediately next to the other end of the strand. Pull the wooden posts or posts away from the strand to stretch it tight, then attach the ground cap. Make sure you stretch each wire enough that it’s taut but not so much that there are any visible sags or flops in the wire.

You should be able to bounce the fence wire up and down a few inches without feeling or seeing any movement. Tighten the fence one post at a time, going from the corners in toward the gate if there is a gate. Make sure all wooden posts or posts are secure before you attach the ground caps or staples to each wire.

Conclusion

If you need to stretch your fence across uneven terrain ground, the best way is by using a post pounder. Place posts in strategic locations and then drive them into the ground with a mallet or hammer. You can also use logs to support an even more stable structure that will last longer than just posts alone.

Always ensure there are no trees nearby before pounding posts because this could damage roots which may cause the tree to topple over later on down the line. Once all of your posts have been pounded into place, stretch the field fence.

Check your fence daily to make sure no damage has been done and that it is secure at all times. You can also check each post every few days to ensure they are still in good shape and not cracking or breaking away from the ground. The article has been a good guide on how to stretch field fence on uneven ground.

You may read also: How to Run Woven Wire Fence on Uneven Ground

Smart Home Pick
Logo