How to Take Apart a Bissell Preheat Pet Carpet Cleaner

The Bissell Proheat Pet Carpet Cleaner is a machine for cleaning a carpet that uses hot water to remove stains and dirt. Since the device heats the water, it can be beneficial when you have an accident or spill in your home. Unfortunately, many people are unaware of how to take apart this machine to clean it thoroughly.

Bissell Proheat Pet Carpet Cleaner

The Bissell Proheat Pet Carpet Cleaner is an excellent tool for anyone who has pets or children because they make accidents happen more frequently than most adults would like, but the Bissell is great for cleaning up these messes. By following these instructions carefully, anyone can quickly learn how to take apart a Bissell proheat pet carpet cleaner with little hassle or frustration.

Step to Follow on How to Take Apart a Bissell Proheat Pet Carpet Cleaner

Step One: Determine

First, check to see if your Bissell Proheat Pet Carpet Cleaner is the model that needs to be taken apart for you to access the belt. If it has a solid metal handle, it doesn’t need to be taken apart. It also helps if you take a photo of how yours is put together currently before starting the disassembly process.

Determine

Then, check to see if your model has a metal handle rather than a plastic one. If it doesn’t have a metal handle, you’ll need to take off the hose and wand first, and then grip the handle and pull toward yourself to take it off.

Step Two: Take Hose and Wand Off

If your Bissell Proheat Pet Carpet Cleaner does have a plastic handle, you can skip this step. However, if it has a metal one, first, you’ll need to unclip the hose from the back of the machine. It’s held in by a small clip concealed behind a bit of plastic that prevents water from leaking out or dirt from getting into the machine during use.

You should be able to wedge something flat inside there to press down on the clip and release it. Then push it towards yourself gently to take off the tube connected to your cleaner’s base. After this part is done, do the same thing with your wand right below the cleaner’s handle.

Step Three: Wiggle Around a bit of Bit

Now, it’s time to take off the bottom panel. First, you’ll need to remove the dirty water container, just a simple snap-on lid that can be pushed away from yourself to come off. Then you must lift on the whole front end of the machine about an inch or two and then pull towards yourself gently.

Wiggle Around a bit of Bit

Some clips are holding this part in place, which should open up easily when you do this maneuver. Once it does, it slides out toward yourself for easy access to all of your Bissell Proheat Pet Carpet Cleaner’s inner workings.

Step Four: Take Off Top Cover

Now it’s time to take off your Bissell Proheat Pet Carpet Cleaner’s top cover. Again, there are no clips to worry about here, but there might still be some stubbornness involved with this step. You’ll have to wiggle the whole top around a bit of a bit for it to come off, but it should come off if you pull toward yourself.

If you want to replace the belt, you can do so now with this cover gone, but be aware that it’s a little tricky. It’s easiest to pull the whole agitator assembly out of its slot and then slide the belt underneath it. Then put the agitator assembly back into its place and try to line up the belt with it so you can put your cover back on.

Step Five: Remove Agitator Assembly

Now that your Bissell Proheat Pet Carpet Cleaner’s top cover is removed, your agitator assembly should be accessible. First, you’ll have to take off the black brush roll if it hasn’t come off already. It just pulls off with a bit of force being applied toward yourself.

You don’t have to do anything special to get it to release, but once it’s off, you’ll need to take care with the belt that turns the brush roll. It’s connected to some spindles connected to an orange-ish piece connected to your agitator assembly.

Step Six: Take Off Agitator Assembly

First, pull the agitator assembly straight up and out of its slot. Then make sure that nothing is obstructing it from moving around right now, and turn it on. If everything is clear, you can wiggle your agitator assembly around a bit of a bit to free up the belt from its spindles and orange-ish piece.

The belt should come out easily if you pull it from the front. If all this description is confusing, know that the belt should come off pretty easily once you take your agitator assembly completely out of its slot. These steps should help you in learning how to take apart a Bissell proheat pet carpet cleaner.

Step Seven: Put Everything Back Together

To put your Bissell Proheat Pet Carpet Cleaner back together, do the reverse of what you did to take it apart. Slide the agitator assembly back into place and get the belt situated with its spindles and orange-ish piece.

Put Everything Back Together

Then slide the front end right below this setup and snap down this front panel. Then put your dirty water container back into place and push its lid onto its clips. Lastly, wiggle the bottom of your machine back into place along with all of its clips so it can close properly.

Step Eight: Maintain Your Cleaner

Now that you’ve taken your Bissell Proheat Pet Carpet Cleaner apart, this is an excellent time to clean out all of the filters. Just lift on each one at its base and take it off to wash thoroughly with warm, soapy water. There are filters underneath each of your dirty water tanks as well, so take those out and clean them off.

You Can Check It Out to: Drill Through Carpet

Conclusion

The Bissell Proheat Pet Carpet Cleaner is a popular choice for pet owners because of its efficiency. However, it can be challenging to take apart and clean the machine when you need to perform maintenance. Fortunately, with these instructions, you should be able to get it apart easily and put it back together without much trouble.

This article has shown you how to take apart a Bissell proheat pet carpet cleaner. If you still have troubles, feel free to leave a comment, and we’ll help in any way we can. Just keep in mind that there is no magic trick to get it apart easily. You have to move slowly and carefully while pulling the machine back into place.

You can also read – How to clean carpet cleaner brushes

Smart Home Pick
Logo