How to Wash Bernat Blanket Yarn

Washing Bernat Blanket yarn is an easy process. Before starting the process, there are a few considerations to consider, but it’s not difficult at all. Here are some tips for washing your blanket yarn. First, make sure you have enough space in your washer and dryer to do both items together.

If you don’t, wash them separately and allow plenty of drying time between. Do not use any fabric softener on this type of yarn because it will clog up the fibers with residue that won’t come out quickly.

How to Wash Bernat Blanket Yarn

Your best bet is to use Woolite or Eucalan wool wash instead of detergent for gentle cleaning that doesn’t leave behind soap scum or residue when rinsing out the water. In this article, we’ll explore how to wash bernat blanket yarn.

Step to Follow on How to Wash Bernat Blanket Yarn 

Step One: Fill the Sink

Fill your sink with boiling water. Add a squirt of dish soap, and give it a few minutes to heat up. If you have the time, do this before you start to prepare your yarn for washing. You can adjust the temperature as needed; if it feels too hot or cold, dump some more hot/cold water into the sink to adjust it.

Step Two: Prepare the Yarn for Washing 

Lay your blanket out flat on a large surface. Roll it up gently and remove any ties you might have used to keep track of your progress, making sure not to unravel your work. It would help if you also clipped any tags off the blanket; these can be saved and reused on the finished blanket. Set your tags aside; you will need them after the blanket has been washed and dried!

Rollup Blanket, Subemrge Into Sink Then Add Soap

Once that is done, get your yarn ready to wash by submerging it in the sink of hot water. First, make sure all of your yarn is covered by water; if it’s not saturated, move on to step three. The yarn must be wet before you add soap or wash it. If it’s not, your color might run, and you’ll end up with a ruined blanket!

Step Three: Add Soap to the Sink

Once all of your yarn has been submerged in water, add a small amount of detergent or Woolite to your hot water. This helps break through any grime or dirt the yarn might have picked up along the way and lets it work its way out easily as you agitate it in the next step.

If you aren’t using a soap designed for washing wool, make sure to test a small amount of your detergent on an inconspicuous part of your yarn first to make sure it doesn’t affect the color of your yarn. If the color seems to run after using your soap, use distilled white vinegar to remove the stains instead.

Step Four: Agitate Your Yarn in the Water

Once you’ve added your soap or detergent, agitate the yarn for between three and five minutes to make sure it’s working its way through both your yarn and any dirt. If you’re using a top-loading washing machine, you can let your yarn soak in the water for up to an hour for the best results.

You can also use a mesh laundry bag or stocking instead of submerging it in the water. This is especially good for huge blankets, like twin-sized ones, which you might not be able to fit into your sink. Keep in mind, though, that it’s harder to clean the yarn with mesh laundry bags thoroughly; you might end up having to wash your blanket twice.

Step Five: Rinse Your Blanket

Once you’ve finished agitating your yarn for three to five minutes or an hour if using a top-loading machine, rinse it thoroughly with water that is as hot as the yarn you used to knit it. Rinse for two to three minutes or longer, if needed.

Make Sure to Rinse Your Yarn for at Least Three Minutes

If your blanket has a large amount of soap built up, using distilled white vinegar to rinse instead will help remove the bubbles and build-up from your yarn. Make sure to rinse your yarn for at least three minutes, though; it takes that long before the vinegar is rinsed out thoroughly.

Step Six: Remove Excess Water from Your Yarn

Once you’ve finished rinsing your yarn, let it drip dry for a few minutes. You can use a dish rack or towel to help absorb some of the excess water. Don’t wring the yarn out, as this might stretch it and cause problems when you’re trying to block it later on.

Let It Drip Dry for a Few Minutes

Don’t be surprised if your yarn takes a while to dry; it can take up to 24 hours, depending on how much water is in the yarn and the temperature and humidity of your drying area. If you want to speed things along, use a fan or hairdryer at a low setting for 10-15 minutes. This will help in how to wash bernat blanket yarn.

Step Seven: Finish Up!

After your yarn is dry mainly, rewind it into an orderly skein. Try to keep the stitches even so that your blanket looks good when it’s done. Clip your tags onto the finished blanket, and you’re done! Finally, remember that no matter what you do or how well you care for your blanket yarn, it can be ruined if a pet decides to chew on it.

Please make sure any pets in your household are aware of this before giving them free rein in the house while you work. If you follow these steps and use the right tools, washing your Bernat Blanket Yarn will be a breeze. Getting clean yarn is one of the essential parts of knitting or crocheting; if you don’t, it won’t look as pretty when it’s done.

Conclusion

Your Bernat Blanket Yarn project will be beautiful and one-of-a-kind. However, if you want to make sure your yarn is clean, we recommend following these simple instructions for washing it. The first thing you should do before you wash the yarn is checked if there are any knots or tangles in the strand of yarn.

We recommend untangling them by hand as much as possible but not pulling too hard on the strands. Next, fill a sink with cold water and add some dish soap. Now submerge both ends of your ball of Bernat Blanket Yarn into the dish soap solution until they’re entirely wet – but not sopping! We hope you enjoyed this article on how to wash bernat blanket yarn.

You may also like to learn about – How to Repair a Washing Machine

Smart Home Pick
Logo