One of the most frustrating things to deal with is a broken air conditioner during the hottest months of summer. You can’t sleep at night because it’s too hot, you’re sweating all day long, and your clothes are sticking to your skin. And if that wasn’t bad enough, now you have water spilling out from underneath your hair portable ac unit!
Don’t worry, though – we’ll show you how to drain water from Haier’s portable ac unit so it can cool off again. Read on for more information about fixing this problem and make sure it doesn’t happen again! The Haier Portable Air Conditioner is a great product, but it does have some limitations. So, this article is for you. You will learn how to drain water from Haier portable air conditioner with just one simple trick!
11 Steps to Follow on How to Drain Water From Haier Portable Air Conditioner
Step One: Turn Off The Air Conditioner
Before you can drain the water in your Haier portable air conditioner, you need to turn off the unit. Otherwise, if you attempt to remove the tank without shutting it off, hot water will start spurting out all over the place. Don’t worry; there’s no harm in draining it while it’s turned on. However, it is always best to shut off the unit before attempting any work on it, especially when there are tools involved.
Step Two: Locate The Drain Valve
On the bottom right of your Haier portable air conditioner, you should find a small dial with three settings: Drain, 90, and Off. This is the drain valve. Turn the dial to Drain and wait for all of the water to drain out. You can use a bucket or other container to catch it as it comes out, but make sure you don’t accidentally trip over it later.
Step Three: Open The Filter Cover
There should be a small cover on top of your Haier portable air conditioner that can be removed to access the filter inside. If you turn your unit off and it has been sitting for a while, remove the cover and clean all of the dust and other buildups away from it. Remove any debris like dirt or bugs as well.
Step Four: Open The Drain Valve Completely
Once you’ve got the filter cover off, turn your Haier portable air conditioner back on and make sure it’s set to Drain. Continue draining the water until there is nothing left in your machine. If the water is coming out very slowly or in spurts, something might be clogging your drain valve. You’ll need to remove the tank and check inside for any debris that could be blocking it.
Step Five: Put The Cover Back On
After you finish draining your Haier portable air conditioner, put the filter cover back on and tighten it. This will keep bugs and other pests out of your unit, which could damage it over time.
You Can Check It Out to Level Air Conditioner Pad
Step Six: Wipe Down The Unit
Once everything is dry, use a damp cloth to wipe down the entire machine. Pay extra attention to the drain valve and any other areas that look like they have buildups or water stains. You’ll want your Haier portable air conditioner looking clean before running it again.
Step Seven: Replace The Air Filter
After you’ve wiped down the outside of your Haier portable air conditioner, put the filter back inside. If it’s particularly dirty, you can also use a vacuum to remove debris from it first. However, if you recently vacuumed it and you still notice dust or dirt on there, do not attempt to clean it with a vacuum again. This could damage your machine or make the filter fall apart. Instead, keep it as is and replace the entire unit when necessary.
Step Eight: Check The Drain Valve One More Time
Before you turn your Haier portable air conditioner back on, check the dial for any debris that may have been stuck to it. If there is any dirt or bugs on the dial, turn your unit off and clean this area thoroughly.
Step Nine: Turn The Unit Back On
Before you can turn your Haier portable air conditioner back on, you need to make sure the dial is set to Drain. If it isn’t, set it there and wait for all of the water to drip out before continuing. Once this happens, recheck your filter. If it’s really dirty, you might need to replace the filter completely.
Step Ten: Clean Any Residual Water
If your Haier portable air conditioner still has a lot of water in it, you need to clean that up before using it again. Before turning on the unit, wipe away any extra water and remove debris from around the drain valve. Once this is all done, you can turn your unit back on and use it as needed.
Step Eleven: Plug The Unit Back In
After you’ve cleaned up any remaining water, make sure to plug your Haier portable air conditioner back in. If you bring it along with you anywhere after using it, be sure to drain all of the water from inside before bringing it into a confined space. This will help in how to drain water from Haier portable air conditioner.
Why Does My Haier Ac Keep Filling With Water?
Haier ACs and dehumidifiers help remove humidity from the air of a room by collecting water in a reservoir. The AC’s fan blows air into the reservoir, drawing out moisture through a hose that then goes to your sink or outside. If you show signs of having too much humidity in your home, you can use the dehumidifier to remove it.
If the reservoir becomes full, water from the AC will quickly collect in a puddle on the floor. To solve this problem and dry up your Haier AC so that you can clean out the water and resume operating as normal, you must find a way to drain the water.
Frequently Asked Questions
Where Is the Drain Plug on a Haier Air Conditioner?
The drain plug is located on the bottom of the unit, which is typically black. It has a round cover with a lever that opens and closes to allow for draining water from the unit.
Why Is My Haier Portable Air Conditioner Leaking Water?
The first thing that comes to mind is the filter. If it is clogged, then there would be water coming out of the air conditioner even when it is turned off.
If you have already changed the filter and are still having issues with your Haier portable air conditioner leaking water, then you should contact Haier customer service for assistance.
Why Is My Portable Air Conditioner Not Evaporating Water?
If your portable air conditioner is not evaporating water, then it may be due to a few different reasons.
- The drain tube may be clogged with debris or sediment that has collected in the bottom of the tank and is preventing the water from draining out.
- There could be a problem with the temperature setting on your unit, and you are operating it at too high of a temperature for evaporation to occur properly.
- If you are using the device outside and there is no condensation buildup on its metal housing, then there may be an issue with how cold your unit can get before the ice starts forming on its surface or causing damage to other objects nearby, such as trees or grass.
If it is an emergency, you can drain water from your portable air conditioner by turning off the power. To do this, turn the dial to OFF and disconnect the electrical cord if there is one plugged in at the back of the unit.
Next, remove all debris or objects blocking drainage holes on the front panel to allow for maximum airflow out of the machine. The conclusion paragraph is informative and provides information on how to drain water from Haier portable air conditioner.
You may also read this – How to Install Portable Air Conditioner in Jalousie Window .