If you’re like me, you probably had no idea what Orbeez was until recently. I was at a friend’s house and saw her daughter playing with what looked like oversized water marbles. It turns out Orbeez are small, jelly-like balls that expand in water to up to 100 times their original size. Orbeez are made of superabsorbent polymers, which are small molecules that can absorb large amounts of water.
You can buy them in various colors, and they’re marketed as a stress reliever. But, unfortunately, while they’re fun to play with, I discovered the hard way that they’re also nearly impossible to clean up once they’ve been in your bathtub! Plus, you’ll probably end up with a weird film on your hands after playing with them for a while.
If you’re unfortunate enough to have let Orbeez into your tub, don’t worry – there’s a way to get them out. The key is to act quickly! The longer they’re in the water, the more they’ll expand and the harder they’ll be to remove. This blog post will go over how to clean orbeez out of bathtub. If you have Orbeez in your tub, the first thing you need to do is turn off the water. Then, take a cup and scoop out as many of the Orbeez as you can. Next, fill the tub up with very hot water.
Step to Follow on How to Clean Orbeez Out of Bathtub
Step One: Mark the Area
Before cleaning any area, use a marker or wax pencil to mark the outline of the Orbeez. This will give you an idea of how much soaking solution is needed for this project. It is also essential to know where the entrance and exit points are to keep Orbeez. Now prepare the solution by adding one tablespoon of dishwashing liquid and water. Mix it well until the liquid is foamy. It takes about three to four hours for Orbeez to absorb enough liquid to be fully hydrated.
If the Orbeez is underneath an easily removed drain, pull it out and place it to the side. Be careful not to disturb other parts of the project if there are other steps you need to take before cleaning the Orbeez. It is important not to touch the Orbeez unless it is necessary. If the Orbeez is inside a pipe, you will need to take the entire pipe apart to remove it. This is usually not necessary and can be difficult depending on the type of pipe. You may want to use a plunger or snake instead to remove the Orbeez.
If you do, you may cause them to stick to other surfaces, making it difficult for you to get rid of the Orbeez. You will then have a suction cup effect that can cause your fingers to become stuck. This is not safe for your fingers and should be avoided.
Step Two: Soak the Orbeez
Once you have marked off the area where you will be cleaning, fill the bucket with warm water. Once it has filled to about halfway, you can add the cleaning solution. Some people prefer to use dish soap, but if your Orbeez is still in good shape and has a scent, it is not necessary.
Dish detergents also may cause a residue after a few washes, which will make your Orbeez hard to clean going forward. You can instead use water and add a small amount of bleach. This will break down the components in your Orbeez and allow you to easily clean them out without leaving bad smells or residue behind.
Some people also prefer using vinegar, but this is not suggested for use with colored Orbeez as it can cause color bleeding in some cases. It is best to avoid using vinegar if possible. Once the cleaning solution is mixed in, slowly pour it over the Orbeez.
Step Three: Remove the Orbeez
After letting them soak, use a spoon or a similar object to remove the Orbeez. If they are still in good condition, they should pop out easily, and you can place them in the bucket for disposal. If there are any stuck, use a gentle twisting motion to try and remove them.
If the Orbeez is too damaged, it will not come out easily. In this case, take a toothbrush and start to gently rub the Orbeez free from the grout and any other surfaces it is stuck to. This can be very time-consuming and require some patience to complete the project.
Continue using the toothbrush if you still cannot remove all of the Orbeez by hand after letting them soak for a while. If you are still having trouble, you can try using a plunger to suction onto the Orbeez and pull them free. This will help in how to clean orbeez out of bathtub.
Step Four: Clean With Baking Soda
If you are still having trouble with the Orbeez, sprinkle some baking soda on them and rub it in with the toothbrush. Try using vinegar instead if you still cannot get all of the Orbeez removed. Use one tablespoon of vinegar to two cups of water and place it into a spray bottle.
Spray this solution over the area where you had trouble cleaning. Let it sit for a few minutes, and then scrub the area with the toothbrush. This will help break down any residue left behind from the Orbeez and the cleaning solution you used.
If you still cannot remove the Orbeez, you can also try using a plunger. If none of this works, there may be permanent damage to the tub or drain, which will require professional help to fix. In any case, it is best to avoid letting Orbeez sit in the tub for an extended time.
Step Five: Drain
Once your tub is free of Orbeez, place the drain back in place. This will make it easier for you to clean any remaining residue later and keep anything else from getting into your drain. You can use some water and baking soda to scrub down the area where the Orbeez was if there are still some left behind.
Be sure to use the plunger, vinegar, or baking soda solution if you still cannot get them out. This will help ensure all Orbeez are removed and keep your tub in good working condition after cleaning. If you have any concerns about a clog in your drain, it is best to leave it in the hands of a professional.
Cleaning orbeez out of your bathtub can be a daunting task, but following these simple steps can make the process much easier. Be sure to use a gentle touch when removing the Orbeez and use a plunger if necessary. These steps should help you learn how to clean orbeez out of bathtub.
Step Six: Maintain
Now that you have cleaned out your bathtub, it is essential to take steps to ensure this doesn’t happen again. A great way to keep Orbeez from forming again is by using a drain cover. Drain covers are made of mesh that will not allow anything inside of the tub or sink to pass through them, including Orbeez.
If you do not have a drain cover, there are other things you can use. For example, a strainer or cheesecloth placed over the drain will help prevent any larger particles from making their way into your tub, as well as smaller ones such as Orbeez. Also, place a shower mat inside the tub to help soak up any water before it has a chance to pool.
This will help keep the Orbeez from forming in the first place. Regularly cleaning your tub and drains will also help to prevent any build-up that could lead to Orbeez forming again. Be sure to use a gentle touch when cleaning and try using a plunger if necessary.
With a few quick steps, you can have your bathroom looking good as new. The first thing to do is close off the water supply so it won’t spill out of the bathtub when you’re cleaning up all those little balls. Next, remove any other toys or objects from the tub and fill it with hot water – this will help loosen up some of the dirt stuck in there too!
You’ll want to use dish soap for the best results since its powerful suds are perfect for breaking down grime on hard surfaces like tile and pottery. Turn off the tap when everything’s clean and let things dry before using again. We hope you enjoyed this article on how to clean orbeez out of bathtub.
You may also read: How Important Is a Bathtub in a Master Bathroom