Drainage systems are a standard feature in most homes. They help protect the home from water damage caused by flooding and leaks, but they also have their share of problems. One such issue is when your drainage system gets clogged up because of debris or other obstructions.
This could lead to a backup in your drain pipes, which can seep into the basement if it isn’t taken care of quickly enough. That’s why you should know how to drain the utility sink in the garage; it will come in handy when you need to unclog the drainage system for whatever reason.
You don’t want something like that happening without knowing about handling these kinds of plumbing emergencies! To do that, read on, and we’ll tell you what you need to do. It is essential to know how to drain utility sink in garage.
Step to Follow on How to Drain Utility Sink in Garage
Step One: Determine
First, you should determine if the drain is clogged or not. To do this, turn on the sink. If water does not flow, then it is most likely stoppered up. On the other hand, if the water flows freely, the problem is likely a faulty dishwasher, clogged up sink trap, or another potential drain-related issue.
Then, see if the garbage disposal is unclogged. To do this, run water and turn on the disposal while it is running. If the sink drain has a filter at the outlet, you will need to remove it first. Also, make sure that if there’s some extra debris at your disposal, you should clear them out of the unit.
When the sink is done draining, you should be able to see if there are any clogs. To do this, remove the filter or clear out the garbage disposal. Then, rerun the water and watch for the drain flow. If your sink is still not draining, then that means you have a bigger problem than just something stuck in the drain.
Step Two: Clear
If you want to clear the drain, make sure to use a plunger first. This is because plungers are made with an attachment that fits onto standard utility sink drains. The other option is to use a plumber’s snake/auger with an elongated wire corkscrew that can be inserted into your sink and then turned.
Both of these tools can be used to unclog a sink drain. If you decide to use the plunger, place it over the drain and pump up and down until the clog has been removed or it feels like there is less resistance than usual. If neither of those options works, you will have to use chemical drain cleaners to get rid of the clog.
If you use chemical drain cleaners, make sure that they are non-toxic and safe for you to get in contact with because if you don’t, it can cause an infection in your skin. Also, don’t forget to follow the directions on the packaging because some chemicals will need to sit at the drain overnight or for a certain amount of hours before they are effective.
Step Three: Unclog
If you want to unclog the drain, make sure to use cleaner first. This is because any clogged up sink will need to be cleaned out before working correctly again. Also, you should check that there isn’t anything stuck at the bottom or inside of your sink because if there is, you might have to find a plumber.
The other option is to use a plunger if you don’t want to spend money on hiring a professional. Make sure that you place the plunger right over your sink drain and then pump it up and down as hard as you can until the clog has been removed or it feels like there is less resistance than usual.
You can also use a snake to clear out your dishwasher. Unclogging the sink drain will depend on how severe the clog is. If the clog has been removed, then it should be easier for water to drain out of your sink and into your dishwasher. This will help in how to drain utility sink in garage.
Step Four: Check
You can check any problems by turning on the water and running a load of dishes through the dishwasher. Then, run hot water in the sink to see if the water is draining. If it still doesn’t work, then you should hire a plumber to fix your dishwasher and sink drain.
If neither of those options solves your problem, you will have to get rid of the clog built up inside. Unfortunately, this means that you will need to go into the unit and fix it yourself. If you have never done this before, then you might want to consider hiring a plumber instead of trying to fix it by yourself.
Again, even though fixing the dishwasher is less expensive than getting a plumber, there are some risks associated with doing the job yourself, resulting in more expenses. The other option is to hire a plumber, which will cost more than fixing it yourself, but it’s less of a hassle and safer than doing the job by yourself.
Step Five: Maintain
The best way to maintain your unit is to try and prevent clogs from happening. Unclogging the drain periodically is an easy solution for this, but you must do so before there are any problems with your dishwasher or sink drain.
There are a few ways to prevent clogs, such as using garbage disposals, which can help prevent large food particles from getting stuck in your sink. Another option is to use enzyme drain cleaners once a month to eliminate any buildup that might have occurred.
When I first moved into my house, the utility sink in my garage was clogged. It took me a few hours to figure out how to drain it before I realized that there was an on/off lever on the side of the faucet.
If you’re struggling with your own clogged utility sink and don’t know where this switch is located, then try looking around for a horizontal lever, usually red or dark brown, about halfway down from the top edge of the basin.
This will allow you to turn off water flow through all three valves at once so that they can be replaced without having any running water left in them afterward. The conclusion paragraph is informative and provides information on how to drain utility sink in garage.
Check it out to learn- How to Get Rid of Black Mold in Sink Drain