In this blog post, we’ll be discussing how to move a deck without taking it apart. Though there are many benefits from taking the deck apart first and then moving it, sometimes this isn’t possible or practical for various reasons. Assuming the deck is in decent shape and you don’t want to take it apart, there are a few different ways that you can go about moving the deck. The most important thing is to be careful and take your time so that you don’t damage the deck or injure yourself.
If you’re unsure if your situation would warrant removing the deck first, read on before proceeding! So now that we have an idea of what our article will cover let’s discuss why people might want to remove their deck before moving it. There are several reasons why you might want to remove your deck before moving it. In some cases, the deck is too large or cumbersome to move without first removing it from its frame.
One reason may be that they’re looking to sell their home and don’t want anything ugly showing up in the photos; decks can detract from curb appeal for those looking at homes online. Another benefit of removing a deck before moving is that some older homes may not have the room to fit a large deck in your new home. Other than the reasons above, there are several things to consider when deciding whether or not to remove your deck before moving.
Step to Follow on How to Move a Deck Without Taking It Apart
Step One: Dictate Stance
The first thing you’re going to want to do before attempting this task is to grab your stack of cards and tell them how much they mean to you. Get real with each other, let it all out; then, put the cards away for now so that they won’t be jealous when you move stuff around without taking them apart. Next, grab a pen and some paper, or open up a blank document on your computer. Write out each card’s name and value, then list the total value of all of your cards.
However, you feel most comfortable, sitting on the floor or standing up is an excellent place to begin. This is because it’s going to take two people to move the deck from point A to point B without taking it apart, and you don’t want to risk dropping one or more cards as you divide the stack. After you’ve divided the deck, it’s time to shuffle.
Step Two: Articulate Commands
Now that you have your stance, it’s time to plan how to move the deck from point A to point B without taking it apart. You’ll need at least two people for this task, and the first thing you’ll need to do is determine who will be the ‘Mover’ and who will be the ‘Mirror.’
The Mover will hold the other half of the deck, so they’ll need a free hand to move cards around. For this reason, it’s probably best if The Mirror holds on to their end of the stick with both hands. The Mover’s objective is to take cards from one side of the stack and move them over diagonally, placing them directly in front or behind other cards on the opposite side.
Step Three: Decide Where to Begin
Okay, it’s time to move the deck from point A to point B without separating it. You’ll need two people for this, and you’ll want to decide who will be the Mover. The Mover will hold on to their half of the deck with one hand, and they’re going to use the other free hand to move cards from one side of the stack and put them directly in front or behind other cards on the opposite side.
The Mover will not let go of their side of the deck during this process so that The Mirror will have free range of motion. However, they’ll need to pay close attention so that they can move cards directly in front or behind other cards on the opposite side, following The Mover’s lead.
Step Four: Begin Moving Cards
Starting from opposite ends of the stack, both The Mover and The Mirror will engage in moving cards over diagonally one by one while continuing to hold on tight to the deck at all times. The Mover will begin with their free hand, moving cards from one side of the stack and placing them directly in front or behind other cards on the opposite side.
The Mirror will follow suit, mimicking every move that The Mover makes until the stack is completely divided and both sides flush. Of course, slight adjustments might need to be made to get the stacks even, but that’s perfectly fine.
Step Five: The Cool Part
Once you’re completely divided into two groups, you’re free to move around however you please without taking the stack of cards apart. This means that there are no restrictions on where or how far apart both groups of cards can travel. The Mover can even walk away from the stack at this point, as long as they’re willing to come back later for it.
Tackling this task where you’re required to move a deck without taking it apart can be a fun way to break the ice with new people in your circle of friends. It’s best done with two people, sitting or standing up, but feel free to alter that as needed for comfort. This will help in how to move a deck without taking it apart.
Step Six: Profit
Once you’re satisfied with your position, there are no limitations to where you can go from here. This means that if The Mover wants to walk away from the deck, then they can do so without leaving their half of the stack behind. They’ll only need to come back later for it!
The Mirror will be in charge of the deck until The Mover returns, so make sure to pay attention closely when moving cards in order not accidentally to separate them. That’s it! That’s all you need to do to move a deck without taking it apart.
Just remember that The Mover is never allowed to let go of their half of the deck and that The Mirror will be following all moves with one hand on each end of the stack at all times.
You can Check It Out to Get Rid of Bee Hive Under Deck
Frequently Asked Questions
Can a Floating Deck Be Moved?
A floating deck is a type of patio that has been installed on the ground, not on a foundation. To move a floating deck, you would need to remove it from the ground and then re-install it somewhere else.
How Much Does It Cost to Move a Deck?
There are a lot of factors that come into play when determining the cost of moving a deck. One factor is the size of the deck, which can make it difficult to give an accurate estimate without knowing what type of material will be used for the project.
What Is the Easiest Way to Remove Deck Boards?
If you have old deck boards and are in bad shape, it is best to replace them with new ones. If you don’t want to replace the entire deck, there are some steps that can be taken to remove the boards one by one without damaging the structure of your home.
First, cut off all electrical wires on either side of the board using a utility knife or box cutter. Then grab a crowbar and use it to pry up the board from its top corner. Finally, use your hands or a hammer to knock out any remaining nails holding down the board.
Can I Remove a Deck Myself?
Yes, you can remove a deck yourself if you have the right tools and know-how. Here’s a guide to help you get started:
1. Get the right tools – You’ll need a ladder, saw, and screws to remove your deck. Make sure to equip yourself with all the necessary safety gear – eye protection, hearing protection, and gloves.
2. Plan your route – Before you start sawing or climbing the ladder, be sure to plan your route so that you don’t end up getting hurt. Also, take into account the weather – decks can be slippery in wet weather conditions.
3. Remove the deck – Once you have planned your route and are sure of your safety precautions, start removing your deck by following the instructions provided in the guide. Be careful not to damage the railing or other structural components while doing so!
Should a Deck Be Attached to the House?
When it comes to decks, there are pros and cons to attaching them to the house. The main pro is that decks provide a great way to increase your living space while also adding character and flavor to your home. They can also be an excellent place for entertaining guests, providing a stunning view of the surroundings, or accessing fresh air and sunlight.
The downside is that if heavy rains swell the deck below grade, then water may eventually damage or even collapse the decking system. Additionally, when not used properly, decks can attract insects and other pests which can be expensive (and disgusting) to deal with.
What Kind of Jack do You Use to Lift a Deck?
There are many different types of jacks, but the most common is the hydraulic jack. Hydraulic jacks use pressurized fluid to lift and move heavy objects. They are often used for construction sites, warehouses, and commercial buildings.
Another popular type of jack is the hand or male jack. This particular Jack uses human strength to do work that would otherwise be too difficult or dangerous for a machine to accomplish alone. Handymen and home repair workers frequently use this type of Jack to hang pictures, install crown molding, etc..
There are also portable jacks that can be easily moved from one location to another so they can be used in multiple contexts.
Can I Use a Chainsaw to Remove a Deck?
it depends on the chainsaw, the deck, and your experience. Some chainsaws are specifically designed for deck removal, while others may not be as effective. If you’re not sure whether or not your chainsaw is suitable for the task, it’s best to consult with a professional.
Conclusion
There are three ways to move a deck without taking it apart. The first is with the use of jacks under each joist, which will gradually raise the deck off its foundation and onto blocks or skids so you can then slide them out one by one.
Another option would be to dismantle your deck in sections, piece-by-piece, transporting these smaller pieces on top of larger ones that have been left in place while moving other parts away from your new location. The article has been a good guide on how to move a deck without taking it apart.
You may also like – How to remove deck stain from aluminum siding.
