Introduction
A time Warner table clock is a clock that is designed to sit on a table or desk. It has a sleek design and a contemporary look. It features an LED display that shows the time, date, and temperature. It also has a built-in alarm and a USB port for charging devices. The Time Warner cable is connected to a PC, and it can be used as an external display.
The good thing about the clock is that it only needs one line for both data transfer and power supply. On the other hand, if you want to set up additional clocks, you simply need to buy another receiver that will wirelessly connect to the central clock. This article will discuss how to remove Time Warner cable lock. So let us get started.
A Detailed Stepwsie Guide on How to Remove Time Warner Cable Lock
Step One
Locate the connector on your Time Warner Cable box. This is where you will connect the converter box to remove the lock.
Step Two
Plugin one end of an HDMI cable into the output connector on the back of your time warner cable box. Connect the other end to your TV’s input port. If you use a different connection, such as component or RCA, it will still work, but this might change some settings on your television that permanently alter how it works.
Step Three
Turn on both boxes and then press “menu” on both devices when they turn on (or turn them both off and them back on). Press down until you get to either Set-Up or System.
Step Four
Highlight “System” on the Time Warner Cable box and press “Enter.” Then use the arrow keys to select “Video Output” and press enter. Change this setting from “HDMI” to “Analog” and enter again.
Step Five
Now highlight “Exit” and hit enter. You will be prompted to save your changes, just hit yes.
Step Six
Your Time Warner Cable box is now in analog mode. To complete the process, you will need to purchase a converter box to remove the cable lock. These boxes typically cost less than $30 on Amazon.
Just plug this into the cable box’s Time Warner Cable port and then connect one end to your television (component, RCA, or HDMI) and the other end to an available outlet. You might need to change your TV input again, but it should work fine if you follow the steps above.
Step Seven
Wait until both devices turn on (or turn them off and back on). Press the menu on both devices again when they are turned on. Use arrow keys to select “System” on the converter box and enter. Then select “Channel 3/4” from the options that display with arrow keys. Hit enter again.
Step Eight
If all went according to plan, you’d now be watching TV without the Time Warner Cable lock.
As you can see, it’s not that difficult to remove the lock from your Time Warner Cable box. You need a converter box and follow these simple steps. With this guide, you should be able to watch your favorite shows and movies without any interruptions.
If you’re still having difficulties, don’t hesitate to contact Time Warner Cable support for help. They should be more than happy to assist you in getting your cable-locked box working correctly again.
Precautions While Removing Time Werner Cable Lock
If the five wires of your cable TV were installed by a professional, the chances are high that it will have a strong clip that is very hard to remove. In cases like this, you may have better luck cutting the wire and installing an aftermarket cable box mode that will not require you to open up the wall for it to work. - In most cases, a professional installer uses a lock with a unique shape made just for Time Warner Cable company. This type of lock lets them make sure none of their installers lose the key, and no one else can use their service without paying or making another hole in your house. You need some exceptional tools to break such locks, and if you don’t know what they look like (they are not the same as a regular key), it is better not to try it yourself.
- Time Warner Cable technicians have a unique tool to open these locks without causing any damage, but you may not have it, and even if you do, it’s not recommended to try to open the lock by yourself. Instead, if you don’t know how to remove the Time Warner Cable Lock or think that the process may be too complicated, please call a technician and let him do it for you. Again, it is better to be safe than sorry.
Advantages of Time Werner Cable Lock
The unique design of the ‘T’ Handle Cable Lock makes it easy to use even by children.
Prevention From Outside Interference
Once a connection is made, the line would be disconnected if there is any attempt to tamper with cable as the cable will break as soon as someone tries to remove or disconnect it.
Tamper Proof
There is no way you can gain access to the cable network after installation except through the dedicated cable port, which ensures that you are not bothered by stray wires hanging around your house. Nobody comes and connects his own TV set up, etc., to watch free TV.
Disadvantages of Time Werner Cable Lock
Time Werner lock is only suitable for single TV, and this lock does not support more than two connections, so if you need more links, you have to purchase additional Locks. In addition, the waves are expensive, and there is no option of buying one cable lock instead of two like in the case of direct connection.
Current Scenario
Time Warner Cable Lock has become popular because it prevents interference or unwanted connections with people’s cable lines. The company provides these locks free, but customers must visit the office every time they want to connect their TVs, etc.
This has created many inconveniences for many customers as now they also do not require to go through the cumbersome process of installation by professionals. With the advancement in technology, one can easily buy Werner Cable Locks online without physically visiting the store.
Conclusion
I hope this article has been beneficial for learning how to remove Time Warner cable lock properly. Ensure all the precautions while performing the process. Thank you and have a nice day!
