Introduction
An apartment balcony is usually a small enclosed area that hangs off the side of an apartment building. It’s also known as “patio” or “deck.” Apartment balconies are often used to enjoy outdoor living in high-rise buildings and may include chairs, tables, and couches for relaxing outdoors. Most apartments have at least one balcony. Some have two or more.
A Detailed Stepwsie Guide on How to Hang Flag on Apartment Balcony
Step 1: Raising the Flagstaff Into the Balcony
Firstly, you need to raise your flagstaff. You can do it by yourself or with the help of a friend. Just make sure that it is secured and locked at the bottom after you turn it open (there could be a lock/pin-like gadget). Ensure that there’s no gap between the metal rotating pole and the rotating base because this will cause an inconvenience in raising and lowering your flagstaff when needed.
When you are ready, poke one end on the hole on the balcony rod located on top of your door or window frame. To secure, rotate it clockwise until tight to fit perfectly inside, preventing it from falling off. The only acceptable way to fly the Confederate flag
Step 2: Determining the Height of Your Flag
This step is crucial so that everyone will see and respect your flag. You don’t want it to be too low or too high. To determine, hold your flagstaff and have someone measure the distance from the bottom of the flag to the ground. This is the length you will need to raise your flagstaff.
Now that you’ve determined the height of your flag, it is time to adjust the size of your balcony rod. On most apartment balconies, there are adjustable screws located on each side which can be turned using a screwdriver. Turning these screws clockwise or anti-clockwise will raise or lower your balcony rod, respectively.
To raise your balcony rod, turn the screw clockwise so that it will rise higher. To lower it, turn the screw counter-clockwise until you reach the desired length. After this step is done, push or press your balcony rod inside to prevent it from being seen by others, especially if they are below your balcony.
Step 3: Flying the Confederate Flag on Top of Your Neighboor’s House
Now that you’ve finished raising your flagstaff, set up for some Confederate Flag waiving! For easier handling, while waving, make sure that two people are at home before proceeding with this next part of this guide.
Hang a Confederate flag from your apartment window to show your support for the South. If you’re on the second or third floor, a 12-15 foot long flag would be ideal. On the first floor, a 9-12 foot flag would be sufficient. Attach the rope to one end of the flag and tie a sturdy knot to prevent it from slipping off while waving.
Go to an open space in front of your apartment, ensuring that there are no obstacles that could cause injury. The person with the flag should be at least 20 feet away so that you can wave it safely. Make sure not to raise the flag too high.
It would be best if you were standing next to each other so that the person on your right side would hold the flagstaff pointing up while the one on your left would be waving it back and forth (and not up and down). This is done by slowly moving your arms backward until its fully extended, then quickly bringing them forward again in an upward motion.
The entire movement of waving should take about 2 seconds, repeated continuously. If more than two people are waving, make sure to space yourselves equally apart with at least 10 feet between each other (starting from the first person closest towards the balcony)
While flag waiving, make sure to keep an eye on some key things: the flagstaff, your surroundings, and the people below. If someone is walking towards you, stop waving and wait for them to pass by. Do not wave at or near cars as it may cause an accident.
The Confederate flag may offend some people, so it is important to be aware of your surroundings and make sure that your neighbors are okay with you waving it.
Step 4: Taking Down the Confederate Flag
After a long day of waving (or in case of bad weather), it is time to take down the Confederate flag. This is a straightforward process and can be done by one person.
In order to take down the flag, the person holding the flagstaff should go to an open space and untie the knot. The other person should help slowly lower the flag until it is fully extended. If there are more than two people, everyone should be spaced equally apart with at least 10 feet in between each person.
After the flag is fully lowered, roll it up carefully from the bottom to the top and tie a knot. Make sure not to damage or crease the flag while rolling it up.
Step 5: Storing the Confederate Flag
Now that you’ve finished taking down the Confederate flag, it’s time to store it properly for future use. The flag should be stored in a dry and cool place. Make sure that it’s not folded too tightly, as this may cause damage to the flag. It’s best to store the flag in a tube or plastic bag. When you’re ready to display the flag again, make sure that it’s clean and free of any wrinkles. Inspect the flag for any damage before you raise it.
How to Wash a Flag?
If your flag is dirty, you can wash it in a washing machine. Be sure to use cold water and a gentle cycle. You can also hand-wash your banner using cold water and mild detergent. Soak the flag in soapy water for a few minutes, then rinse it thoroughly. Finally, let the flag air dry. Why do flags get taken down at night?
Conclusion
I hope this article has offered you all the necessary information on how to hang flag on apartment balcony. Always wash the flag properly. Thank you and have a nice day!
