The fence in your backyard is a great asset. It adds value to your home and can be used for privacy or decoration. There are several ways to improve the look of your fences, such as replacing rotted boards and painting. If you’re looking for an inexpensive way to update the appearance of your fence, consider applying Thompson’s Water Seal to it.
Thompson’s Water Seal is a waterproofing agent that will protect against rain and snow damage while also enhancing the color of the wood on your fence. This product comes in many colors, so you can find one closely matching what you already have on your fence.
Applying this sealant doesn’t take very long but remember that it does require time to dry before using the fence. So, this article is for you. You will learn how to apply Thompson’s water seal to a fence with just one simple trick!
6 Steps to Follow on How to Apply Thompson’s Water Seal to a Fence
Step One: Determine
First, get your supplies. Often, you will get special deals on how to apply Thompson’s Water Seal if you buy it in bulk, so keep an eye out for that. In addition, you will need brushes of different sizes, some rags and some gloves for this job. If possible, wear old clothes because they can ruin your clothes quite easily.
If you want to paint the outside of your fence, you will need to use a water seal on it. You will be using Thompson’s Water Seal; there are other brands out there, but they do not produce such desirable results as Thompson’s does. If you want your fence to last longer and look nice, make sure that you apply this to your fence.
To apply it, you will need to purchase some brushes; one should be the size four brush. You may also need gloves and rags for this job. Before you begin applying the water seal onto your fence, make sure that you shake up your can of the product so that everything is mixed well.
Step Two: Clean the Fence
As you are getting your materials for this job, make sure to clean them. You can use a pressure washer or soap and water. You should clean the fence because if there are any oils, dirt, or other substances on there, they will affect how well your paint sticks to it.
If it does not come off easily, you should scrub it with a wire brush. The wire brush can get into all of the tiny crevices on the fence to help remove anything that might be stuck there. After this process has been completed, your fence should look clean and shiny.
This is very important because if you do not clean the fence and it has something on it, your paint will probably not stick to the area where it previously was. Also, this will help in how to apply Thompson’s water seal to a fence.
Step Three: Apply the Water Seal
Now that you have your supplies and cleaned the fence, you are ready to apply the water seal. You should first shake up your can of product before using it because this will help mix all ingredients. Once everything is mixed well, begin painting on some water seal on some part of your fence.
There are several different ways you can apply the water seal. You can choose to paint your fence with stripes, or if you want, you can apply it straight over the entire area. If this is something that you are just learning how to do, try doing stripes. It will be easier for you than painting in one color all over the fence.
If you choose to paint it in one color, make sure to do this in light layers. You should also apply your coats sparingly by putting them on only once every few inches. If the coat is too thick or too many coats are applied to certain spots, this could create problems for you.
Step Four: Wait
Now that you have applied the water seal to your fence, you need to wait for it to dry. Once your paint is dried, wash off your brushes and clean up any messes so that there are no drips or spills on the freshly painted fence.
The instructions tell you to allow forty-eight hours for this project before you can walk on the paint, or if light rain is a possibility, then you should wait an extra day before doing any of this. If there are going to be heavy rains within the first few days after you apply your water seal, it will probably cause some problems for you and may even ruin your painting job.
This is why you need to wait the appropriate amount of time before walking on it or doing anything that will cause water to contact the area. These steps should help you in learning how to apply Thompson’s water seal to a fence.
Step Five: Maintaining Your Water Seal
The directions for maintaining your water seal are straightforward. First, you should take a hose and spray it over the fence a few times a year. You have to be careful not to get any water on the house because this will cause problems with the paint job.
Now that everything has been applied and you have waited for the paint to dry, it is time to make sure that your fence looks good. If there are any spots or blemishes in the paint, then use a wire brush to clean them; clean them well so that there is no residue left over and everything has been obliterated.
If everything goes right and you do not have any problems with the water seal paint, your fence will look excellent and be protected against most things that can happen. Keeping this maintenance up is essential so that you do not have paint peeling off of the house or fence, and everything looks shiny and new for a long time to come.
Step Six: Enjoy!
Once everything is cleaned up from this project, you can sit back and enjoy your work. If the paint job was done right, then your fence will not be damaged by any water or other elements that may try to hurt it. This will help you because it minimizes the amount of maintenance needed on the fences and adds a little more curb appeal to the house.
If you want to make sure that your fence looks good and does not get damaged by the elements, then this is a project that you should consider. The steps in these directions will help you learn how to apply Thompson’s water seal over your fence and protect it from rain and other things that can damage it.
So go out and try this project today. The directions are straightforward to read and understand, so you should accomplish this with no problem. And once it is done, you will feel proud of your work and enjoy having a protected fence without too much maintenance. Thanks for reading about how to apply Thompson’s water seal to a fence.
You can check it to Tighten Barb Wire Fence.
Do You Need to Seal Both Sides of a Fence?
Some fences do not need to be sealed on both sides. For example, a decorative fence going up against a house or garage can usually be sealed on the side that faces into the yard. The opposite side may not need sealing as much as others depending on what it is made of and where it was constructed.
If you want, you can still seal the fence on both sides. It is a good idea to do so in some cases because you will have better protection from the elements on both sides of your fence. You may also want to paint or stain the side that faces into your yard to look nicer and match the house.
We do not recommend that you use Thompson’s Water Seal on the side that faces into your yard because of this. This is meant to be a water seal and will turn yellow if it gets too much sun exposure. It may also stain whatever color you paint or stain it, along with any plants or grass that grow up from the garden below.
Conclusion
Thompson’s Water Seal is a versatile product that can protect wooden fences from all types of weather. You’ll typically need two gallons of the sealant for each coat, which means you may want to purchase more than one gallon at a time if your fence needs three coats.
Apply it with a brush or roller and wear protective gloves when applying the sealer as it has strong odors. Allow 24 hours between coats before exposing your newly sealed wood furniture to rain or snow again! This blog post has given helpful advice on how to apply Thompson’s water seal to a fence.
Check it out also – How to Attach Fence to House.
