How to Pick a Door Lock That Has One Hole

I’ve always wanted to learn how to pick a lock. Of course, it’s not like you can get locked out of your house very often knock on wood, but it’s still something I think is pretty cool and helpful to know. So when my friend told me that he would teach me, I was super excited!


The only problem was that all the locks in his house had two holes- so there wasn’t much for me to practice on. So when he told me that I would have to imagine that his locks had one hole, I was pretty discouraged. But then, I started to think- I’ve seen locks that only have one hole before!

This wasn’t going to be nearly as complicated as I thought it would be, and I was starting to get pretty good at it! So, this article is for you. You will learn how to pick a door lock that has one hole with just one simple trick!

Step to Follow on How to Pick a Door Lock That Has One Hole

Step One: Determine How to Hold the Tools.

One hole door locks have a pin and a driver in the lock that must be lined up. The way this is done is by controlling how tightly the pins are held in place. This can be done in two ways: using a tension wrench or an Allen key, which was discussed earlier. If you are to use an Allen key, take the wire, stick it in the hole, and turn it to grab onto either the pin or the driver.

Determine how to hold the tools.

Make sure to hold onto something sturdy as this is very hard to do unless you have a lot of strength. If instead, for some reason, you decide to use a tension wrench, this is commonly done in movies but is also illegal, so watch out, grab the bottom of the tension wrench and put it between your ring finger and thumb.

Then, with the rest of your fingers, hold onto either end of the lock. Hold it in an upright position and turn until you hear a click. Do not be discouraged if you don’t get this on your first try. Just keep practicing, and you will be able to do it.

Step Two: Move the Door Open.

After you have picked how to hold the lock, move on to picking the lock. Using a tension wrench, start by pushing down with your bottom hand while pulling up with your top hand. If you are using an Allen key, turn the wire until it locks in a place with resistance.

If you are using a tension wrench, try to line up the pins so that they are to the top or bottom of the lock, and if you are using an Allen key, try to get it so that the pin is in the right place. Then, turn the wrench in a circular motion while pushing down and pulling up on the lock simultaneously.

Please don’t put too much force into it, or you might break off a pin, making your job harder. Make sure to hold onto something sturdy in case you accidentally break off a pin. These steps should help you in learning how to pick a door lock that has one hole.

Step Three: Pull the Door Open.

If you are using a tension wrench, turn the bottom of the lock until it comes off. If you are using an Allen key, pull on either end of the lock to pull it open if you got this right, congratulations! You have picked a one-hole lock successfully.

Pull the door open.

This is quite hard to do and takes a lot of practice, but once you get the hang of it, you will do it very quickly and efficiently. If not, try doing this a few more times until you get it right. Then, if you aren’t sure if you got it, try to push the door open.

If it is locked, you didn’t get it right. If you can push the door open, go ahead and try locking it again to ensure that you did do it correctly; if you do get it, congratulations! If you didn’t, don’t be discouraged. Keep practicing, and soon you will get it right every time.

Step Four: Clean Up Your Mess

If you successfully picked the lock, congratulations! Now that you got the door open, go ahead and put the locks back together, so nobody knows what just happened. If possible, clean up the door and any tools you used to pick the lock so that it looks like nothing ever happened.

If you have broken off a pin, try putting it back in with your spare pins. If not, they might still be inside of the lock, which means someone could discover what just happened if they tried to use this lock again. You can also use a spare pin if you don’t have any spares.

Using something like a toothpick, try to push the pins back up and put them in place so that it looks like nothing happened if you do this, congratulations! You just picked your first door lock. If you want to find out more about how to pick a door lock that has one hole, keep reading.

Step Five: Lock the Door Behind You

Now that you have picked your first lock try to pick some more locks and see if you can get better at it. Then, if you want, go ahead and learn how to unlock a door without picking or breaking anything. It is just as fun and challenging! If not, good job on learning how to pick a lock!

Now go out and use your skills to see if you can pick locks around your neighborhood or at school. Don’t forget to tell the lock’s owner, so they know what happened and who did it. If you don’t, they might find out eventually and become very angry with you, which isn’t fun to deal with.

You can also lock your door with a one-hole lock even if the pin is broken off. It will need to be fixed by someone who knows how to pick locks, but you can use it like this until then. If the door opens when locked, you can lock it with a key and then unlock it with the same key to ensure that nobody opens this door.

Step Six: Get Rid of Your Evidence

If you don’t, someone might find it and figure out what just happened. If nobody knows, they will probably continue to believe that the lock is impossible to pick. Be sure to clean up any messes you make so you aren’t discovered and can keep practicing how to pick locks without worrying about getting caught.

Get rid of your evidence

This is not the case if you use an Allen key, which can’t be put back together without breaking it. If this happens, don’t panic. You can pick another lock and continue practicing or go to a locksmith who knows how to fix locks so you can learn how to pick them at your own pace.

Be sure not to take the lock with you if nobody knows what happened. They will be very worried and might call the police to search for clues about who broke into their house or car. So make sure that it looks like nothing has been done before you go home or leave your practice area.

Remember, this skill needs to be kept up if you want to become good at it. If you don’t practice, allowing your skills to rust, you will be back to square one and have to learn everything repeatedly; this can be very frustrating for people who are new to lock picking. However, this will help in how to pick a door lock that has one hole.

Step Seven: Maintain Your Locks

If you take care of your lock, it will last for a long time. Keep it oiled and clean so that dirt doesn’t build up inside it, allowing the pins to stick or break off. Once again, this is not an issue if you use an Allen key since these can be cleaned with water.

Keeping your lock clean will also make it look better and prevent it from being damaged. Don’t forget to oil the parts that turn since this reduces friction and makes your lock easier to use. If you drop a pin or other part inside a lock, go ahead and take it out.

If it stays stuck inside, more damage might be done, and the lock might break. If you don’t want to risk this, find a way to take it out and prevent future problems like flooding the lock with lubricant or taking the lock apart.

You Can Check It Out to Remove Graphite From Door Hinges

Frequently Asked Questions

What Is the Easiest Way to Pick a Door Lock?

There are many different types of locks to choose from, but one of the easiest ways to pick a lock is using the pin tumbler system.

Pins in this system have several springs that hold them in place, and they can be arranged so that they turn with the key when it is inserted into the lock. The pins can also be aligned with each other or offset, which prevents them from turning with the key, leaving you unable to open the door.

Another way to pick a lock is by using tension wrenches, wire cutters, and screwdrivers on a padlock’s body itself.

What Is the Door Lock Hole Called?

The term door lock hole is used to describe the area in a door where the lock and key enter. There are many different types of locks that can be installed into this hole. They can include deadbolts, mortise locks, rim locks, edge-mounted locks, and even padlocks.

Are All Door Locks Different?

All door locks are different, but some of them can be more effective than others. Some Types of Locks Include :

  • A key-in-knob lock is a locking mechanism that uses a separate key for each lock on the door and requires insertion into the knob before it can be turned.
  • A pin tumbler lock is a mechanical lock that uses pins to secure against manipulation. The pins may or may not have grooves to make picking more difficult.
  • A mortise lock has one fixed deadbolt on the inside and one or two hinges with no handle on the outside, so they require entry from inside or by breaking through the glass at either side of the frame with an ax or crowbar.


Lock picking is an art that’s been around for a long time. Thieves initially used it to open locks without the key, but it has become more of an art form and hobby. There are many different lock pick sets available online or at your local hardware store, which you can use to learn how to do this yourself.

With these tools, anyone with patience and determination can try their hand at opening a lock from home! The conclusion paragraph is informative and provides information on how to pick a door lock that has one hole.

Check it out: How to Break Into a Keypad Door Lock

Smart Home Pick