How to Remove Bathtub Sticker Residue

Removing bathtub sticker residue can be a tedious task. The most common way to remove it is by using an adhesive remover like Goo Gone, which can cause damage to the surface underneath. Fortunately, you can dissolve bathtub sticker residue without damaging your tub using coconut oil and baking soda.

How to Remove Bathtub Sticker Residue

If the residue is particularly stubborn, you may need a scraper. Oils are suitable for dissolving adhesive residue because they can break down the adhesive’s bonding power. One of the best oils for this job is coconut oil, which has been proven effective in dissolving even super glue!

Mixing baking soda with coconut oil creates an oatmeal-like paste that is perfect for getting any residue off your bathtub. Baking soda also serves as an abrasive, which gives it the power to remove residue without causing harm to your tub. Therefore, it is crucial to know how to remove bathtub sticker residue.

Things You”ll Need

  • Metal Scraper
  • Vaseline or Petroleum Jelly
  • Paper Towel
  • Soap and Water
  • Razor Blade

Step to Follow on How to Remove Bathtub Sticker Residue

Step One: Mark the Area

Before removing the sticker residue, it is essential to mark the area to know where it was. You will want to cover the site in some way so that it is not sticky when you are done with your work. A sample tip would be covering the edges of the bathtub with masking tape vertically so that you can usually see which area of the tub was covered by the sticker.

If you are not familiar with the area, you may want to prime it to know precisely where the sticker was on the bathtub. You may also use this area as a guide for cleaning off the sticker residue later on. It will save you a lot of time figuring out where the sticker was that you need to focus on.

If you have a bathtub sticker with text or an image on it, it is essential to take pictures of the sticker before you start removing it. This is because you want to have some documentation of the sticker to put back on the bathtub in the same place when you are finished.

Step Two: Applying Vinegar to the Area

Now that you have marked off the area with a marker and covered it, you can start by pouring vinegar over the sticker residue. You will want to pour it generously over the area and let it soak in for a few minutes. The vinegar should help soften up the adhesive so that it is easier to remove.

You can use a sponge or rag to rub the vinegar into the adhesive. You will want to do this by starting at one end of the sticker and working your way outwards towards where you marked off. This will ensure that you are not spreading around any of the sticker residues that are still on the bathtub with your scrubbing motion.

If any areas are particularly stubborn, you can use a toothbrush to help scrub off the adhesive. Be sure to brush in the same direction as you were rubbing with the sponge to not move any of the adhesives around. This will help in how to remove bathtub sticker residue.

Step Three: Using Baking Soda and Water

Warm Water

After you have finished using the vinegar to soak into and rub off all of the adhesive, you can finish the area by pouring baking soda and water over it. The baking soda will help to neutralize any acid that may be left behind. The mixture should not be too wet but should also not be bone dry.

You will want to use a rag or sponge to scrub off any remaining adhesive. If you are having trouble, you can also use warm water, baking soda, and salt to create a paste that will be easier to remove any leftover stickiness from the area.

Once you have finished scrubbing, rinse the area with warm water and dry it off. You should now see the area where the sticker was without any adhesive residue left behind. If any areas are still sticky, you can repeat these steps until all residues are gone.

Step Four: Using Alcohol and Cotton Swabs

After you have finished scrubbing with the baking soda and water mixture, it is also possible to use alcohol and cotton swabs to remove leftover residues from the bathtub. This will be particularly effective if any areas seem stubborn or hard to get off otherwise.

Cotton Swabs

You will need a cotton swab for each area you want to clean and alcohol at least 70% or higher. Dip the cotton swab into the alcohol and then rub it against the adhesive residue. You will want to do this until the cotton swab comes back clean.

Once you have done this for all areas that need it, use a dry cloth to wipe off the alcohol residue. You will now see any areas where you can repeat this step to clean it off thoroughly. These steps should help you in learning how to remove bathtub sticker residue.

Step Five: Taking a Hairdryer to the Residue

If you have any areas that still seem to be sticky after following all of the previous steps, you can try using a hairdryer to heat the adhesive and help it come off. Be sure to hold the hair dryer at least 18 inches away from the sticker residue and use the hottest setting possible.

Use a Hairdryer

You will need to keep moving the hairdryer back and forth over the area until the sticker residue starts to peel off. Do not use too much pressure when doing this, or you may end up damaging the bathtub. Once all of the adhesives are gone, use a clean cloth to wipe off any remaining residues.

You should now see the area where the sticker was without any adhesive residue left behind. If any areas are still sticky, you can repeat these steps until all residues are gone. The information provided in this article is for reference purposes only and not for use as professional advice.

Step Six: Maintain Your Bathtub

Once you have finished using these steps to remove any stickers from your bathtub, it will also be essential to maintain the surface, so this residue will not happen in the future. You can do this by purchasing an acrylic bathtub-specific cleaner designed to keep your bathtub free of dirt and other particles that might lead to sticking.

Remove Any Stickers From Bathtub

This cleaner will also help keep your bathtub free of calcium and limescale, which forms the adhesive residues in the first place. Keeping this from happening will be easier than having to clean it off again in the future. All of this information will help you learn how to remove bathtub sticker residue.

It is essential to take the proper precautions when removing any adhesive residues from your bathtub or shower. You will want to be sure that the water is turned off before you start and that you do not use any harsh chemicals or abrasive materials that may damage the surface.

You Can Check It Out to Clean Orbeez Out of Bathtub

How Do You Remove Sticker Residue From Fiberglass?

The best way to remove sticker residue from fiberglass is by using a plastic or metal scraper. You can also use a toothbrush dipped in vinegar or Goo Gone. Be sure to wipe the area clean with a wet cloth afterward. If any residue remains, it will spread the more you let it sit.

Whatever method you choose, do not scrape too hard, or you could gouge your fiberglass bathtub. You can also try using a hairdryer to heat the sticker residue and soften the chemicals holding it on. Then, blow it cool air, so you don’t burn yourself.

Fiberglass Bathtub

Frequently Asked Questions

Can You Use Goo Gone on Tubs?

Honestly, we haven’t tried it ourselves, but this seems like a straightforward question that should not be too difficult to answer. Goo Gone is a product designed for cleaning and removing grease and grime from surfaces. It’s safe to use on tubs since the ingredient Primolite penetrates the surface quickly to remove all oils and residues. We would recommend using caution when using any type of cleaner on porcelain or cast iron because they can be delicate materials that may become scratched or dented as a result of cleaning. If you have any questions about how specific cleaners treat different types of surfaces, please feel free to contact us!

What Is the Strongest Adhesive Remover?

The adhesive remover that is the strongest will depend on the specific needs of the individual. However, some general tips that may help include using a high-pressure sprayer and using a solvent such as acetone or methylene chloride.

Does Vinegar Remove Adhesive?

Vinegar does not remove adhesive, but it can help to clean and freshen surfaces. Adhesive remover is a product that usually contains harsh chemicals that may damage or strip the paint or finish off of your furniture. Vinegar, on the other hand, is a natural cleaner that is effective in removing dirt, dust mites, mouse droppings, and other contaminants from indoor surfaces. It also has antibacterial properties, which help eliminate unwanted smells.

By using vinegar as an outdoor cleaning solution, you can disinfect areas around your home, such as patios and walkways, while protecting vinyl siding from sun exposure and acidic rainwater. Additionally, vinegar can be used to clean window screens; just squirt some into a small cotton swab and use it to gently scrub the screen until it’s free of streaks or marks.

Does Wd-40 Remove Sticker Residue?

WD-40 actually contains a resin remover that can help remove sticker residue. However, it’s important to note that WD-40 is not specific to sticker removal – it can also be used for a variety of other purposes, including removing grease and oil from surfaces. So, while WD-40 can help remove sticker residue, it’s not the only tool you need to achieve this goal.


Removing bathtub sticker residue can be a painful process, but it doesn’t have to be. So if you’re looking for an easy way to remove this adhesive from your tub or shower without any of the fuss and hassle that comes with scraping away at stubborn glue, we’ve got some good news!

The best thing about our approach is that all you need are two simple ingredients – baking soda and fabric softener sheets. All you’ll do is place one sheet in a bowl of water before adding four tablespoons of baking soda. This blog post has given helpful advice on how to remove bathtub sticker residue.

Check it out also – How to Remove Bathtub Drain Cover Without Screws

Smart Home Pick