The wood table is a popular piece of furniture for many households. It can be used as a dining table, coffee table, or even a side table. However, no matter what function it serves in your home, you may have to deal with stains on the wood surface. Acetone-based colors are among the most common types of stains that people encounter because they come from nail polish remover. It is important to remove these stains from your wood table as soon as possible to prevent further damage.
If you accidentally spill acetone on your wood table, don’t worry! There are some things you can do to remove the stain and make your table look like new again. This article will tell you how to fix the stain and prevent it from happening in the future.
Stepwsie Guide on How to Fix Acetone Stain on Wood Table
Step 1: Preparing Materials and Erasing Old Stain
Get a towel, acetone, cotton swabs, paper towels.
Make sure the surface is excellent before applying any of these items to it. Next, use a dry or moist cotton swab for gently cleaning the stained area. Be careful not to make scratch marks on the surface with your fingernails while doing this step. Next, rinse off the residue with warm water, then wipe again with a paper towel until no more visible stains. Now it’s time to place some toothpaste on the stain and rub it gently. Do this for about five minutes then rinse off with warm water.
If you still see some black marks there even after wiping it repeatedly, try using acetone until the old stain is completely removed from the wood table surface. When done with this step, your table should be all clean now, even though you have not yet applied any finish to the old stained area.
Step 2: Applying Finish and Fixing Acetone Stain on Wood Table Surface
Apply finish. If you want to perform some tests first, this is the right time for you to try it out before actually applying the substance directly onto your wood table surface. You might need something like a sponge before spreading the essence evenly on the surface of your table after making sure it’s clean enough from previous acetone stains. If you need to work on some areas of your table more than others, it’s up to you to do so before finishing the whole project. You can apply another layer or two if you feel like one is not enough for protecting your wood furniture from further wear and tear.
Ensure all areas are covered using an applicator pad made of foam or cotton ball soaked with paint. Don’t use plastic bags or anything with a sharp edge since these might damage your wood table top instead of improving its appearance. When done correctly, wipe it away with a clean damp cloth or towel after drying it out for 15-30 minutes. It will also depend on what kind of finish you’re using right now since some are specifically made to dry faster than others.
Reapply your first coat if your surface looks dull or not that lustrous anymore even though you have already let it dried completely. After drying, there shouldn’t be any problem with its appearance, especially when you compare it with the previously stained section. If needed, repeat step 2 until satisfied with how it looks like despite having acetone stains earlier on before the final application of finish which might take up another 30 minutes or so depending on the type of finish being used for this project.
Step 3: Maintaining Finished Wood Table Surface
Clean your wood table every after a day or two. This will depend on how often you use it and if you have kids or pets at home. If some parts need more work than the others, then obviously, cleaning becomes essential to help maintain its appearance in an attractive manner. For example, you might need to clean high traffic areas weekly, while other sites that are rarely used or ignored for months can be cleaned once or twice a year since these places require less attention when it comes to maintaining their overall look anyway.
Make sure food spills are immediately wiped off when tables become wet, especially if kids play around with water bottles near your wooden surface. Although most sealed finish coat is resistant to water, it doesn’t mean that you can ignore the fact that some spills might still create dents on your table no matter how careful you are. If you want to make sure your dining room table is protected from water spills, consider using a tablecloth or runner. You can also use place mats to shield your table surface from stains and scratches caused by plates and utensils.
Avoid leaving food near the wood table for a long time since this always causes a foul odor on its surface. It’s also important to use coasters before placing cups or glasses of any kind on top so as not to leave ugly marks and other stains on its surface, which will become permanent damage if left there for days. Applying a finish coat is considered a preventive measure, but of course, it won’t be able to do anything if spills happen from time to time, especially when there are kids around who often spill drinks or eat near wooden tables.
Step 4: Fixing Acetone Stain on Wood Table Surface
Always try cleaning any stains right away. Some spills can be wiped away when it’s fresh, like water-based food or coffee stains. Avoid using soap and any chemical when doing this because the only thing you need to do is wipe it with a clean rag or towel. You might want to use vinegar to neutralize unpleasant odors caused by spilled drinks like beer, wine, liquor, etc. Spray some onto the affected area and ensure there won’t be residue left behind for the best result within minutes.
Keep your wood table in an appropriate place where sunlight will not hit directly to prevent the aging process since too much exposure will fade its appearance over time. Make sure it’s protected from any weather elements, too, including humidity. Most outdoor furniture is made of materials that can tolerate harsh elements like water, sun, etc. If possible, cover it with board or anything that’s more protective than usual when not in use to help preserve its overall look, especially if you’re planning to leave it outside for a more extended period anyway.
Frequently Asked Question
Does Acetone Remove Wood Stain?
Acetone is a common ingredient used in the paint and wood stain removal process. It is also used as a solvent for nail polish remover, adhesive removers, acrylic paint thinners, and oil-based paints.
As mentioned earlier, acetone removes wood stains by dissolving the stain molecules from the surface of the wood.
It does not remove old stains or prevent new ones from forming. The best way to remove old stains is by using warm water with vinegar and then wiping it off with a cloth soaked in water and white vinegar.
Is Acetone Bad for Wood?
Acetone is a chemical solvent, and when used in woodworking, it can cause the wood to become brittle or swell.
It is advisable that you don’t use acetone on unfinished wood because it can cause any finishes to be removed from the surface of the wood.
Can You Strip a Table with Acetone?
If you want to strip a table with acetone, it is possible. You will need to have a lot of the substance in order to do so, and if you are going to use it for this purpose, you should not be concerned about what it might do to your health.
There are many different ways that you can remove wood stains from a table. The most common way is by using turpentine which has been used for decades as an effective way of removing stains from furniture and other materials like steel wool or sandpaper.
It would also be possible to use methylene chloride (a type of paint stripper) or petroleum ether (an older but still widely used solvent).
Will Acetone Remove Gel Stain?
Acetone is a solvent that can remove many types of stains. To get rid of the gel stain, use a toothbrush to scrub the stained area with water and then dip it in acetone. Let the toothbrush soak for 5 minutes before using it again. This should help remove the gel stain.
I hope this article has been beneficial for learning how to fix acetone stain on wood table. However, make sure all the necessary precautions while performing the process. Thank you and have a nice day!
You may also read – Remove perfume stains from wood furniture.